NoiseKen CA-805B Manuel utilisateur

INSTRUCTION MANUAL

COUPLING ADAPTOR

MODEL

CA-805B

NOISE LABORATORY CO., LTD.

1.08 edition

AEB00205-00E-0I

NOTICE

The contents of this booklet are subject to change without prior notice.

No part of this booklet may be reproduced or transferred, in any form, for any purpose,

without the permission of Noise Laboratory Co., Ltd.

The contents of this booklet have been thoroughly checked. However, if a doubtful point,

an error in writing or a missing is found, please contact us.

Noise Laboratory Co., Ltd. shall have no liability for any trouble resulting from the misuse or

improper handling of this product regardless of the contents of this booklet or arising from

the repair or remodeling of this product by a third party other than Noise Laboratory Co.,

Ltd. or its authori ed person.

Noise Laboratory Co., Ltd. shall have no liability for any trouble resulting from the

remodeling or modification of this product.

In no event shall Noise Laboratory Co., Ltd. be liable for any results arising from the use of

this product.

IMPORTANT SAFETY PRECAUTIONS

The following instructions are very important for safe handling of the Coupling Adapter

CA-805B.

They must be kept strictly to prevent users of the Unit from receiving harm or damage through

using the Unit. Read them carefully before use.

The instrument may not be used by people fitted with

electronic medical devices such as pacemakers and such

people may not enter the testing site while the instrument is

operating

Failure to follow this rule risks death or serious injury.



The instrument may only be used by trained EMC technicians

(electrical technicians)

There is a risk of death or serious injury, and of the emission of

electromagnetic noise that exceeds the stipulated limits. Use the instrument

in conjunction with appropriate measures for dealing with electromagnetic

noise such as a Faraday cage or shielded room.

Do not use the instrument for any purposes other than the

EMC testing purposes described in this instruction manual

Failure to follow this rule risks death or serious injury.

The instrument may not be used in a location where fire is

prohibited or there is a risk of explosion

Failure to follow this rule risks igniting a fire due to an electrical discharge.

Before setting up the test site, connecting the equipment, or

starting testing, please read the Chapter entitled "Basic Safety

Precautions" which contains additional safety advice.

Memorandum

APPLICATION FORM FOR INSTRUCTION MANUAL

To: Noise Laboratory Co., Ltd.

We place an order for an instruction manual.

MODEL:

CA-805B

Serial No.:

Applicant:

Company name:

Address:

Department:

Person in charge:

Tel No.:

Fax No.:

Cut off this page "APPLICATION FORM FOR INSTRUCTION MANUAL"

from this volume a d keep it for future use with care.

When an INSTRUCTION MANUAL is required, fill in the above Application Form and

mail or fax it to your nearest sales agent of Noise Laboratory or Noise Laboratory

Your sales agent;

To: NOISE LABORATORY CO., LTD.

1-4-4, CHIYODA, CHUO-KU, SAGAMIHARA CITY, KANAGAWA PREF

252-0237 JAPAN

Tel: +81-42-712-2051 Fax: +81-42-712-2050

The address, company name, individual's name, and other personal information (henceforth

referred to as "personal information")

entered in the application form will only be used for the

purpose of sending the Instruction Manual and will not be shown or passed to any third party

without a valid reason.

Noise Laboratory Co., Ltd. will manage customer's personal information in an app

ropriate

manner.

C u t l i n e

Memorandum

1. IMPORTANT SAFETY PRECAUTIONS........................................................................... 1

2. APPLICATION FORM FOR INSTRUCTION MANUAL........................................................... 3

3. CONTENTS ..................................................................................................................... 5

4. INTRODUCTION ............................................................................................................. 6

5. BASIC PRECAUTIONS FOR SAFETY IN USE OF THIS UNIT ............................................... 8

5-1. Hazard symbols and its meaning................................................................................... 8

5-2. Basic safety precautions.............................................................................................. 8

6. SPECIFICATIONS ........................................................................................................... 10

7. MAIN UNIT AND ACCESSORIES...................................................................................... 11

8. CONNECTIONS .............................................................................................................. 12

8-1. Connections ............................................................................................................ 12

8-2. Avoiding misuse of HV coaxial connector................................................................ 14

9. WARRANTY.................................................................................................................... 15

10. MAINTENANCE............................................................................................................... 18

11. NOISE LABORATORY SUPPORT NETWORK................................................................... 19

CONTENTS

INTRODUCTION

Thank you very much for your purchase of this product.

The Coupling Adaptor CA-805B has been developed to inductively couple the high

voltages pulses from the INS series simulators into cables under test without direction

connection to the conductor of interest.

This operation manual describes the function, operation and safety precautions for

CA-805B.

Thoroughly read this operation manual before use and keep it as a ready reference.

§Features

Connected to the INS series Impulse Noise Simulator, Coupling adaptor Model

CA-805B can couple noises generated by the simulator to the cable only by clamping it.

1. The user does not need to cut the cable to inject

※

noises to the signal, DC, AC or

Ground line of the equipment under test.

※capacitive coupling

2. The user can perform a test for the immunity level of the each part, block, unit or

component composing the equipment under test.

3. Direct noise injection into the signal line enabling effective checking of the level of

noise immunity.

4. The cable to be tested of up to 26mm in diameter can be put through the CA-805B.

Memorandum

5. BASIC PRECAUTIONS FOR SAFETY IN USE OF THIS UNIT

5-1. Hazard symbols and its meaning

It expresses a WARNING.

WARNING

indicates a potentially hazardous situation

which, if not avoided, could result in death or serious

injury.

It expresses a CAUTION.

CAUTION

indicates a potentially hazardous situation

which, if not avoided, may result in minor or moderate

injury.

5-2. Basic safety precautions

A person having a pace maker or other electronic medical device implanted into or

connected to his or her body should not operate this unit and also should not enter

the test area while this unit is operated.

【Precautions for human body, and operation.】

This unit cannot be used in a fire prohibited area or other explosive areas. If used in

such an area, this unit is liable to cause combustion or ignition due to electric

discharge etc.

【Precautions for human body, and environment.】

Our company and its distributors/agents shall have no liability for any injury or

damage resulting from careless operation of this unit and any resultant damage or

loss.

【Precautions for human body, operation, environment and connection.】

Mishandling or careless operation may result in serious injury.

【Precautions for human body, operation, environment and connection.】

For sure and safe operation, use accessories or options supplied from our company.

Any unnecessary cable shall not be connected. Wrong connections may cause

damage to this unit.

【Precautions for human body, operation, and connection.】

Be extremely careful of an electric shock due to the generated pulses and power

supply to EUT. (EUT：Equipment Under Test )

【Precautions for human body and connection.】

Before connecting this unit to a high voltage pulse generator, turn off the high

voltage circuitry beforehand. Otherwise, the operator may receive an electric shock

due to the generated high voltage pulses.

【Precautions for human body and connection.】

Fully insert the coaxial connector and turn it clockwise until a click is heard to make

connection securely.

【Precautions for human body and connection.】

Table des matières

Autres manuels NoiseKen Récepteur

NoiseKen

NoiseKen ADAPTOR Manuel utilisateur

Manuels Récepteur populaires d'autres marques

Garmin

Garmin GA 23 Manuel utilisateur

Aiphone

Aiphone PS-12F Manuel utilisateur

IMES

IMES TCS-01CA-PMI Manuel utilisateur

BWI Eagle

BWI Eagle AIR-EAGLE SR Manuel

AMIMON

AMIMON AMN12310 WHDI Manuel utilisateur

Dual

Dual DMCPA79BT Mode d'emploi

Sound Associates

Sound Associates SA652P Manuel utilisateur

Sherwood

Sherwood NewCastle R-772 Manuel utilisateur

Audio

Audio A10-RX Series Manuel utilisateur

AllSee

AllSee PushShare PSRV1.1 Manuel utilisateur

DEMAG

DEMAG DRC-DR D2 Manuel utilisateur

Teleco

Teleco TVRCL868A02 Manuel utilisateur

Bosch

Bosch RF3222E Manuel utilisateur

Kramer

Kramer 631R Manuel utilisateur

Xpress

Xpress xmc10 Manuel utilisateur

JVC

JVC KD-MR1BTS Manuel utilisateur

Omega Engineering

Omega Engineering UWTC-REC3 Manuel utilisateur

e-survey

e-survey E300 Pro Manuel utilisateur