INFRARED (IR6) REMOTE CONTROL OPERATION
The (optional) IR6 infrared controller enables remote control of the RIPPLE.
To pair the IR6 to the RIPPLE, follow these steps:
1. Press MENU button until SET is displayed
2. Press ENTER
3. Press UP or DOWN to turn infrared operation ON or OFF
4. Press ENTER
IR6 BUTTON FUNCTIONS
COLOR WHEEL
AUTO : Press to set rotation direction
+ / - : Press to choose / change the rotation direction
SPEED : Press to set rotation speed
+ / - : Press to increase / decrease rotation speed
STATIC COLOR
1: Press to choose WHITE
2: Press to choose PURPLE
3: Press to choose YELLOW
4: Press to choose BLUE
5: Press to choose GREEN
6: Press to choose ORANGE
WAVE EFFECT WHEEL
SOUND : Press to set wheel rotation direction
+ / - : Press to change rotation direction
SENSITIVITY : Press to set wheel rotation speed
+ / - : Press to increase / decrease rotation speed
DIMMER CONTROL
MANUAL : Press to set dimmer level
+ / - : Press to increase / decrease dimmer level
BLACKOUT
BLACKOUT : Press to turn o light output
BLACKOUT : Press again to exit blackout mode
Note: : If IR6 remote is not responding, press BLACKOUT to conrm
that blackout mode was not mistakenly activated
11
