Nintendo 64 Manuel utilisateur

Instruction Booklet

NUS-S-HB-AUS

Contents

Section 1

Section 2

Section 3

Section 4

Section 5

WARNING

CAUTION

PLEASE CAREFULLY READ THE CONSUMER INFORMATION AND

PRECAUTIONS BOOKLET INCLUDED WITH THIS PRODUCT BEFORE

USING YOUR NINTENDO® HARDWARE SYSTEM, GAME PAK OR

ACCESSORY. THIS BOOKLET CONTAINS IMPORTANT SAFETY

INFORMATION.

TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT CONNECT THE

AC POWER CORD PLUG TO AN OUTLET, RECEPTACLE OR EXTENSION

CORD UNLESS THE PLUG BLADES CAN BE FULLY INSERTED.

A DAMAGED POWER CORD MAY CAUSE A FIRE OR SHOCK

HAZARD. DO NOT OPERATE IF THE POWER CORD IS BROKEN, SPLIT,

OR DAMAGED IN ANY WAY.

THE NINTENDO 64 GENERATES REALISTIC IMAGES AND 3-D

SIMULATIONS. WHILE PLAYING OR WATCHING CERTAIN VIDEO

IMAGES, SOME PEOPLE MAY EXPERIENCE DIZZINESS, MOTION

SICKNESS OR NAUSEA. IF YOU OR YOUR CHILD EXPERIENCE ANY

OF THESE SYMPTOMS, DISCONTINUE USE AND PLAY AGAIN LATER.

Throughout this Instruction Booklet, you will see sections beginning with

WARNING, CAUTION, and NOTE, Each section has a dierent level of

meaning, as follows:

Nintendo 64 Instruction Booklet

Components

Nintendo 64 Instruction Booklet

Audio/ Video Cable Connections

RF Switch/ RF Modulator Connections

Connecting the AC Power Supply

Connecting the Controller

How to Operate

Removing a Game Pack

Returning to Regular TV

Troubleshooting

Warranty and Service Information

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 10

Page 13

Page 14

Page 18

Warns you about incorrect use of the Nintendo 64 that could result in

serious personal injury.

Cautions you about incorrect use of the Nintendo 64 system that may

result in (1) personal injury or (2) damage to the Nintendo 64 Control

Deck, components or accessories.

NOTE:

Points out important information on using or maintaining

your Nintendo 64 system.

This ofcial seal is your assurance that Nintendo has reviewed this product

and that it has met our standards for excellence in workmanship, reliability

and entertainment value. Always look for this seal

when buying games and accessories to ensure

complete compatibility with your Nintendo product.

All Nintendo products are licensed by sale for use only with other authorized

products bearing the Ofcial Nintendo Seal of Quality ®

Section One Section One

Section One Nintendo 64 Components

Congratulations on your purchase of the Nintendo 64, the world's most advanced

64-bit video game entertainment system, featuring CD-quality stereo sound, incredibly

smooth and realistic graphics and the most exciting video games ever experienced!

Read both the setup instructions and the separate Consumer Information and

Precautions Booklet before attempting to connect the Nintendo 64 Control Deck to your

TV. If, after reading all setup instructions, you are still unable to hook up your system,

please call the NINTENDO Helpline at the number listed below.

On the bottom of

the controller is a

connector slot for

loading an N64

Controller Pak™

(sold separately)

that can save

game data,

controller button

conguration and

more. Look for

Game Paks

displaying the N64

Controller Pak

icon. Read the

N64 Controller Pak

and Game Pak

instruction

booklets for more

information.

NINTENDO 64 INSTRUCTION BOOKLET

Control Deck

Back view of Control Deck

Game Pak Slot

Memory Expansion

Do not remove the Jumper Pak from the Memory

Expansion connector - the Control Deck will not operate.

Controller Sockets 1-4

Expansion Connector (on bottom)

Power Indicator Light

AC Power Supply Connection Port

Multi Out Connector

Nintendo 64 Controller

Nintendo 64

AC Power Supply

Stereo Audio/Video Cable

Bottom View of Controller

NOTE:

<1> The Nintendo 64 system is not intended for play by children under three years of

age.

<2> Do not use the Nintendo 64 system in bathrooms, kitchens, toilets or other humid

places or areas where there is a risk of splashing the unit with water.

Need Help with Installation or game play?

TELEPHONE THE NINTENDO HELPLINE

190 224 1001

Legion Call Rate 75c per min

higher from public or mobile phones.

7 days a week Midday - 9.00pm EST

stereo AV Cable

Section Two Section One

Section One Audio/ Video Cable Connections

The Stereo Audio/Video Cable that is included with the Nintendo 64 will allow you to

connect the Control Deck to most televisions or video cassette recorders.

Choose one of the connection methods that matches the connections for your TV or VCR;

you will only need to make one kind of connection. Then turn to page 7

"Connecting the AC Power Supply" to continue your installation.

If your TV or VCR does not have audio/video connections (i.e., the illustrations on page 5

do not match your TV or VCR), then turn to page 6 "RF Switch/RF Modulator

Connections"

Connection & Installation Back of Control Deck

After completing the connections as shown, turn to pg 7.

Connect to MULTI OUT Connector

Yellow

VIDEO

AUDIO

L R

Yellow

"Y" Adaptor

not included

Purchase from

an alertrenir

supply store.

White

Red

Back of Control Deck

Connect to MULTI OUT Connector

TV or VCR BACK PANEL (INPUT)

AConnecting to a Stereo TV

or VCR

BConnecting to a Mono TV

or VCR (No Stereo Sound)

TV or VCR BACK PANEL (INPUT)

stereo AV Cable

ANTENNA INPUT SOCKET

ON BACK OF TV

RF Switch/ RF Modulator Connections Connecting the AC Power Suppl

WARNING

CAUTION

To prevent electric shock

or damage to the Control

Deck, do not try to use any

other type of AC adapter or

power supply.

To avoid excessive wear to the power supply connector, do not disconnect the AC

Power Supply from the Control Deck except when storing your Nintendo 64. For the

purposes of power saving and safely, disconnect the AC Power Supply from the

outlet after use of the Nintendo 64 .

NOTE:

<1> For the Nintendo 64 system, use only an exclusive Nintendo 64 AC Power Supply : NUS-002(AUS),

do not use any other type of Power Supply.

<2> Inspect the cable, plug, case and other parts of the AC Power Supply for damage periodically.

If damage is found, immediately stop using the AC power supply and return to supplier for repair.

Back of Control Deck

If your TV does not have audio/video connections, you will need to use a Nintendo

64 F Switch and RF Modulator (sold separately).

You can purchase the RF Switch and F Modulator (packaged together as a set) from

most retail stores where Nintendo products are sold.

Connect the Control Deck and your TV set with the RF Switch and Modulator as

shown below.

NOTE: This method of connection will

produce mono sound only (the left and

right stereo channels will be mixed).

Make sure the Power Switch is in the OFF position before connecting the AC Power

Supply.

Connect the AC Power Supply, with the triangle on top as shown, into the port in the

back of the Control Deck. Insert the AC Power Supply into the Control Deck until

you hear a click.

Insert the plug from the power cord into a standard (230-240 volt AC) wall outlet.

CConnecting to a Mono TV

or VCR (No Stereo Sound)

Connect to

MULTI OUT Connector

RF Modulator (sold separately)

Connect to RF OUT Connector

on RF Modulator

Connect to ANTENNA IN

terminal post

RF Switch

(sold separately)

Existing Antenna

Cable

Connecting the Controller

NOTE:

Points out important information on using or maintaining

your Nintendo 64 system.

Plug the Nintendo 64 Controller into the socket on

the front of the Control Deck as shown.

Up to four controllers can be connected at the

same time, but for most games, only the controller

plugged into socket number one (on the left side of

the control deck| will operate the START button.

Each game may have dierent functions for each of

the buttons. + Control Pad and Control Stick.

Depending on the game, the controller will be held

in one of the three positions shown. For further

instructions, consult the instruction booklet for the

Game Pak you are using.

Right Position Left Position Home Position

Section One

1110

Section Three Section One

CAUTION

Always make sure that the Power Switch of the Control Deck is OFF and that you have

checked the Game Pak edge connector for foreign material (which can damage the

Control Deck) before attempting to load a Game Pak into the Control Deck.

After making the necessary connections shown in Section 2, place the Control Deck on

a hard, at surface, such as a television stand, table top or cabinet. Be sure to allow

plenty of space around the Control Deck for ventilation. Once the Control Deck is

properly located, continue with the following instructions:

Turn your television ON.

Make sure the Power Switch of the Control Deck is turned OFF.

Load a Nintendo 64 Game Pak in to

the top of the Control Deck as shown.

Push it down all the way.

Insert the Controllers) into the sockets) on the front of the Control Deck.

Slide the Power Switch to the ON position.

Make sure the red power indicator light on

the front of the Control Deck is ON (if not.

check the AC Power Supply and plug

connection). Push the reset button and release.

NOTE: When turning the Control Deck power ON, do

not move the Control Stick from its neutral position on

the controller.

If the Control Stick is held at an analed position (as

shown below in the picture on the left) when the power is

turned ON, this position will be set as neutral. This will

cause games using the Control Stick to operate

incorrectly.

To reset the neutral position once the game has started, let go of the Control Stick so

it can return to its center position, as shown in the picture on the right below, then

press START while holding down the L and R buttons.

Do not load the Game Pak upside down or otherwise force the Game Pak into the

Control Deck. Load only an N64 Game Pak. Do not attempt to use Super NES, or

any other type of Game Paks.

The Control Deck has several ventilation slots in the housing designed to maintain

adequate ventilation. Do not operate the Control Deck on a carpet, bed, sofa or

other soft surface, or in any location where any of the ventilation slots may become

covered or obstructed. Do not eat or drink around Control Deck.

How to Operate

Removing a Game Pack

1312

CAUTION

Always slide the Power Switch to the OFF

position before loading or removing a Game

Pak. N64 Controller Pak, controller or

accessory.

If you are using an AV connection to your TV or VCR (connection method

A, B), you will need to determine how to select the appropriate input.

NOTE: The most common options for an "Input Select" are: a button

somewhere on the front of the TV or VCR, a button on the remote

control (eg; TV/Video or AV), a high numbered channel on the TV

or VCR, or an on-screen menu selection. Manufacturers of TVs and

VCRs use dierent names and locations for "Input Select". Consult

your TV or VCR instruction manual for details.

If you are using an RF Switch connection to your TV (connection method C)

then set your TV to Channel O.

NOTE: If Channel O is unavailable choose any unused channel. If a

picture does not appear on your TV it will need to be tuned in on

the VL band.

If there is no game display, or a distorted picture appears on the TV screen,

slide the Power Switch OFF and remove the Game Pak. Start over from step

3. If you are still having problems, consult the troubleshooting section on

page 14. After you have nished playing, slide the Power Switch of the Control Deck to the OFF

position. Set the TV /VIDEO or Input switch on the television back to "TV". If you were

using a VCR, set the Input Switch back to receive antenna or pay TV, then turn the VCR

OFF.

There is no need to disconnect the RF Switch, AV Cables, AC Power Supply, etc from

the Control Deck.

For the purpose of power saving and safety, disconnect the AC Power Supply from the

wall outlet.

For additional maintenance, care and precautions, refer to the separate Consumer

Information and Precautions Booklet.

Press START on the Controller plugged into socket number one to start the

game. For further instructions, consult the instruction booklet for the Game

Pak you are using.

Returning to Regular TV

Slide the Power Switch to the

OFF position.

Place one hand on top of the Control

Deck and carefully remove the Game

Pak from the Control Deck with

the other hand.

Section One Troubleshooting

1514

Section Four Section One

Problem

Solution(s)

TV picture does not come on.

Make sure the Power Switch of the Control Deck is turned ON (the red indicator light

should be ON and the AC Power Supply and power cord plug are plugged in.

Problem

Solution(s)

No game display image on TV screen (but TV picture is ON).

Make sure the Power Switch on the Control Deck is turned ON.

Make sure the AC Power Supply is plugged into a 230-240 volt wall outlet and that

the AC Power Supply is plugged into the Control Deck.

If using an AV connection to your TV, make sure the TV /VIDEO switch is switched

to video (see your TV instruction manual).

If you are connecting the Control Deck to a VCR, make sure the VCR is ON and the

Input Switch is set to the correct Input (see your VCR instruction manual).

If you are using an RF Switch connection, make sure that the Control Deck and the

antenna or cable are connected to the F Switch properly and that the F Switch is

connected to the TV (see page 6).

If you are connecting the Control Deck to your TV using an RF Switch, make sure that

the TV is set to Channel "O" or an unused channel.

Make sure your TV is tuned in on the VL band. (See your TV instruction manual for

tuning details.!

Make sure the Game Pak is loaded into the Control Deck correctly (see pages 10-12).

Make sure the Jumper Pak is inserted correctly into the Memory Expansion slot on the

top of the Control Deck

Problem

Solution(s)

Game display is on the TV screen, but the picture is rolling or the screen has bars

or lines.

Adiust the vertical or horizontal hold controls on your TV until the picture becomes

steady.

Problem

Solution(s)

Picture quality is good, but the sound buzzes.

If using an AV connection, check the audio (red and white) connections of the

audio/video cables (see page 5).

A particularly strong TV station (or Pay TV) may be broadcasting in your area and

causing interference. Try disconnecting the antenna wire from the RF Switch. (You will

have to reconnect it again for regular TV viewing.)

Problem

Solution(s)

When not playing, regular TV will not come in.

Make sure the Power Switch of the Control Deck is turned OFF.

If using an AV connection, change the Input switch on your TV back to "TV" (see the

TV instructions).

If using an RF Switch connection, make sure that the antenna or cable is properly

connected to the RF Switch and that the F Switch is connected to the TV

(see page 6).

If regular TV programs will still not come in, unhook the F Switch from your TV and

hook up the antenna or cable directly. (In order to play, you will have to hook up the

RF Switch again.) Or, use a video switch (not included).

Troubleshooting

Continued on next page.

Before seeking repair service, check the problem against the list below:

Troubleshooting Troubleshooting

1716

If ou are still unable to solve the problem, please call the

NINTENDO Helpline at 190 224 1001.

Problem

Solution(s)

Game display is on the TV screen, but the picture is fuzzy, has no colour or

has snow on it. (For RF Switch connections only.)

Make sure that the Control Deck and antenna or cable are properly connected to the

F Switch and that the RF Switch is connected to the TV (see page 6).

Adjust the ne tuning and contrast controls on your TV to receive the clearest picture

possible.

If your TV has an automatic ne tuning control (AFC), turn it OFF and use the manual

ne tuning dial to adjust the picture. If turning OFF the AFC causes your TV to display

in only black and white, then leave the AFC ON.

If the Control Deck is too close to the TV, the Control Deck may cause some

interference. Try moving the Control Deck farther from the TV.

A particularly strong TV station (or Pay TV) may be broadcasting in your area and

causing interference. Try disconnecting the antenna wire from the F Switch. (You will

have to reconnect it again for regular television viewing.) Or, use a video switch (not

provided.

Make sure the RF Output of the RF Switch (marked OUT), is connected to the VHF

input on you TV.

Problem

Solution(s)

Picture is blinking or scrambled.

Try pushing the RESET button. If there is no improvement, slide the Control Deck Power

Switch OFF, then remove the Game Pak and reload it. Slide the Power Switch back to

the ON position and push the RESET button.

Problem

Solution(s)

The controller does not work.

Make sure the Power Switch on the Control Deck is in the OFF position before

plugging in the controller.

Make sure the Control Stick on the controller is in the neutral (center) position when

you turn the Power Switch of the Control Deck to the ON position.

Make sure the controller plug is rmly plugged into socket number one (on the left side

of the Control Deck).

Problem

Solution(s)

Picture quality is good, but there is no sound.

Make sure the TV volume is turned up to an adequate level.

The sound in some Game Paks begins only after START is pressed.

If using an RF Switch connection to your TV, adjust the ne tuning control until the

sound is clear

If using an AV connection, check the audio (red and white) connections of the

audio/video cables (see page 5).

Autres manuels pour 64

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nintendo Console de jeux

Nintendo

Nintendo Nintendo Switch Lite Dimensions

Nintendo

Nintendo DSI Manuel utilisateur

Nintendo

Nintendo Switch Carrying case & screen protector Manuel utilisateur

Nintendo

Nintendo CLASSIC MINI Manuel utilisateur

Nintendo

Nintendo 3DS Manuel utilisateur

Nintendo

Nintendo N64 - 64 Game Console Manuel utilisateur

Nintendo

Nintendo Wii Fun Center Manuel utilisateur

Nintendo

Nintendo GAME&WATCH SUPER MARIO BROS Manuel utilisateur

Nintendo

Nintendo PCHU-MG5 Manuel utilisateur

Nintendo

Nintendo TETRIS Manuel utilisateur

Nintendo

Nintendo Wii Manuel utilisateur

Nintendo

Nintendo Donkey Kong DJR1-18T Manuel utilisateur

Nintendo

Nintendo EDEV HAT-002 Manuel de la liste des pièces

Nintendo

Nintendo Switch Manuel d'utilisation

Nintendo

Nintendo Wii U Manuel utilisateur

Nintendo

Nintendo Super Nintendo Manuel utilisateur

Nintendo

Nintendo 64 Manuel utilisateur

Nintendo

Nintendo Wii U Manuel utilisateur

Nintendo

Nintendo DS Lite Manuel utilisateur

Nintendo

Nintendo GameCube Modem Adapter Manuel utilisateur

Nintendo

Nintendo Control Deck NES Manuel utilisateur

Nintendo

Nintendo MAA-CTR-AFZP-UKV Manuel utilisateur

Nintendo

Nintendo Gameboy Advance Manuel utilisateur

Nintendo

Nintendo RVL-001 - Wii Sports Pack Game Console Manuel utilisateur

Manuels Console de jeux populaires d'autres marques

Atari

Atari 2600 Manuel utilisateur

PLAYNETIC

PLAYNETIC GameNetic Manuel utilisateur

Sony

Sony SCPH-50008 Manuel utilisateur

Saitek

Saitek Alchemist Plus Manuel utilisateur

Sears

Sears Tele-Games 637.99743 Manuel utilisateur

AYANEO

AYANEO 2 Manuel utilisateur

Sony

Sony PlayStation 3 (Uncharted: Drake's Fortune Limited Edition... Manuel utilisateur

Mattel

Mattel My Meebas N2214 Manuel utilisateur

Entex

Entex PacMan2 Manuel utilisateur

Sega

Sega 32X Manuel utilisateur

Saitek

Saitek Cougar Manuel utilisateur

View-Master

View-Master Interactive Vision Schéma de câblage

Sony

Sony SCPH-35003 GT Manuel utilisateur

Sony

Sony PSP go Manuel utilisateur

Sony

Sony PSVITA Manuel utilisateur

Excalibur

Excalibur ABC Wide 333 Manuel utilisateur

Microsoft

Microsoft XBOX Manuel du propriétaire

LEXIBOOK

LEXIBOOK JL2700 Manuel utilisateur