Nintendo Joycon C25 Manuel utilisateur
User Manual For Joycon C25
Product Overview:
1. How to distinguish Left and Right Joy-pad
Joy-Pad on the left has a- button on the top right, Joy-pad on the right has+ b
utton on the top left
2. How to connect Joycon to switch devices
A.Switch Console
Method 1:
With “+”and “-”up side, slide Joycon from the top down along the sliding rails
on both sides of the Switch console until it clicks.
Method 2:
Step 1: Find Controllers Option
Step 2: Click Change Grip/Order
Step 3: Press SYNC button until the 4 LED lights flash in turn for 2 Seconds.
Then release your finger and waiting for the connection to complete.
B. Switch Lite Console
The same as the method of 2 of Switch console connection
Macro Programming:
A. Set Macro function:
Keep the controller under working, press Macro button for 3s and LED flash
slowly and step into Marco programming mode, release “Macro”button, press
the buttons need to be set in turn. And press the Macro button be set saving
record.
Eg: Set A and B and X to macro button, press “M”button 3s and then LED
indicator flash slowly, release “M”button to press A button and then you can
wait after 1s to press B button, and 3s later to press X button, press “M”button
finally to save and exit the mode. Then the Macro button is Button A ---1s
button B --- 3s Button X.
When you setting some buttons, the controller could record the buttons setting
interval time.
C. Clear Macro Function:
When controller under working mode, press the “M”button 5s, the LED light
from blinking turns to keep lighting, then all macro buttons function cleared.
Turbo function:
A. Set Turbo function:
1. Press the turbo and then press the turbo the button you want to set turbo
mode. Hold both two buttons to enter turbo model for the button.
2. Let go of the buttons and you can use the button in turbo mode now.
3. You can set turbo mode for “A,B,X,Y,L,ZL,R,ZR”buttons and the “UP,
DOWN,LEFT,RIGHT”of Dpad
B. Auto Turbo Function: Repeat Step A-1 to turn on theAuto turbo function
C. Clear Turbo Function: Repeat Step A-1 again to exit turbo function.
3. How to remove Joycon from Nintendo Switch devices
1. Switch Console
Find the “remove”button the back of Joycon and slid Joycon from bottom to
top while holding down the state. Release the “Remove”button when Joycon
completely disconnects from the device.
2. Joycon Strap
Pull down to remove the white lock and hold the Joycon wristband and slide
Joycon down until the wristband completely disengages (no need to press the
remove button on the back of Joycon).
4.Re-connection and wake up function
Please ensure console is power on before re-connection.
Press Home/Capture button to wake up Joycon. It should connect to console
automatically. You can also slide the Joycon to console and use directly.
Wake up function is only available when Joycon plugged into Switch console.
Plug Joycon into switch console and press HOME button for 1s, it can wake up
the console.
5.Warm Tips
*This Joycon without IR camera, and does not support games which need IR
camera.
*This Joycon does not match with original Grips.
*This Joycon with 6 axis function, please ensure 6 axis of game is turn on
before playing games.
*This Joycon with dual vibration
*Contact the seller and get the latest firmware
Table des matières
Autres manuels Nintendo Contrôleurs
