not use the electric tools in places exposed to damp/moisture,
or leave them outside in rainy days. Make sure to keep the
operational site bright enough.
6．Keep the children away from the devices. Certain distance
shall be guaranteed as for the children in search of on-site
operational experience.
7．Actions shall be taken to avoid the workshop accessible by
children without permission, such as locking the door,
cutting off the power supply or taking away the launch key.
8．Do not use the devices at will. To ensure the overall quality
of work piece and maintain security anyway, please use the
devices within the design capacity.
9．Use the devices correctly, and do not operate them in
overloading or abnormal status.
10．Ensure appropriate clothing. Do not wear loosen clothes,
gloves, tie, knot, etc. which may result in hazards of being
entangled by running devices. Prefer shoes with skid proof to
avoid slipping, and cut the hair to the proper length.
11．Remember to wear protective spectacles. Abundant dust may
come out in the buffing process, thus it’s necessary to wear
dust mask. Glasses in daily use incorporate lens with impact
resistance only, which could by no means meet the safety
requirements.
12．Do not place your hands over the twisting disk. Meanwhile,
stand still during the operations.
13．Prior to adopting the device, check if the disk suffers from
defects as rupture and the sandpaper is well-composed.
14．Ensure tight connections at the disk and other joints.
15．When using the device, remember to hold the handle firmly.
