Nilfisk Egholm City Ranger 2200 Manuel utilisateur
City Ranger 2200
LAWN EDGER
OperatOr’smanual
2Operator’s Manual City Ranger 2200 Lawn Edger
Introduction
Dear Customer
Congratulations with your Nilsk-Egholm product.
The City Ranger 2200 is a Danish designed and manufactured product, which oers a very exible
way of maintaining outdoor areas.
Optimal use of your Nilsk-Egholm Lawn Edger
To ensure optimal performance of your Nilsk-Egholm Lawn Edger, please read this manual
carefully before using the machine. Failure to do so can result in personal injury and damage to the
machine.
Safety:
The Lawn Edger is equipped with various devices to ensure optimal operational safety both for
the user and the surroundings. We ask you to pay particular attention to section 1.1. Safety.
The machine must only be serviced by professionals.
The Lawn Edger is designed only for use by professionals. On delivery, the user will receive
thorough training to become a competent operator.
Do not lend to anyone who has not been thoroughly trained and who has not read this manual
carefully.
The operator’s manual should be considered a permanent part of the machine and must remain
with the machine if sold.
Warnings:
Some items in this operator’s manual are marked with this warning symbol.
The warning indicates areas where extra care has to be taken to avoid personal
injury or damage to the machine and its accessories. The warning also shows
what you should pay special attention to.
Reservations:
As it is the Nilsk-Egholm policy to make continuous improvements, we reserve the right to alter
the specications and equipment at any time without notice. Nilsk-Egholm A/S accepts no
liability for errors or omissions in the operator’s manual.
Contact us:
Should you have questions of any kind regarding your Egholm product, please do not hesitate to
contact Nilsk-Egholm A/S.
Best regards
Nilsk-Egholm A/S · Transportvej 27 · DK-7620 Lemvig
T. +45 97 81 12 05 · F. +45 97 81 12 10
e-mail: info@egholm.dk · www.nilsk-egholm.com
3
When nishing work on the lawn, the City Ranger 2200 is
tted with the Lawn Edger.
The lawn edges are simultaneously perfectly tilled and
cut, at a steady tempo.
The Lawn Edger is fully-hydraulic and the work-depth can
be regulated by adjusting the support wheel.
The oset of the Lawn Edger can be manually adjusted.
Useful tips
For best results, trim the lawn edges when the ground is
slightly damp.
Never drive faster than the Lawn Edger’s cutting speed.
Make sure the snap couplings are clean before attaching,
as this protect the hydraulic system.
Daily cleaning and maintenance will extend the lifetime of
both the machine and the attachment.
Operator’s Manual City Ranger 2200 Lawn Edger
Contents
Content
General information..............................................................................4
1.1 Safety ....................................................................................4
1.2 EC Declaration of Conformity.................................................................5
1.3 Technical data .............................................................................6
Operator’s manual ...............................................................................7
2.1 Assembly / Disassembly .....................................................................7
2.2 Before start-up ............................................................................8
2.3 Start-up...................................................................................8
2.4 Adjusting .................................................................................9
2.5 Changing the blade........................................................................10
Service and maintenance ........................................................................11
3.1 Cleaning .................................................................................11
3.2 Maintenance .............................................................................11
Conditions .....................................................................................14
4.1 Warranty .................................................................................14
4.2 Complaints ...............................................................................15
4.3 Disposal..................................................................................15
Spare parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
5.1 Spare parts - City Ranger 2200 Lawn Edger....................................................16
Notes .........................................................................................17
4
1
2
3
4Máx. 10°
1.1 Safety
Avoid standing close to the machine
while it is in use.
Make sure that no one is near the machine
while it is in use as there is a danger of crushing.
Attention:
As it is articulated, the rear end of the
machine swings out when turning. Make
sure that no one is standing near the
machine while it is in use. (Picture 1)
Avoid crushing ngers:
Keep your hands and ngers away from
areas where there is a danger of crushing.
Warning! Rotating parts!
To avoid personal injury, make sure no one
puts their ngers or toes under the Lawn
Edger while it is moving. (Pictures 2 and 3)
Avoid roll-overs:
Do not drive the machine in a place where it
can slide, tip or roll. Do not drive on slopes
with an incline of more than 10°. (Picture 4)
Operator’s Manual City Ranger 2200 Lawn Edger
Prevent people from standing in the working area.
Warning! Rotating parts!
Do not drive on slopes with an incline of more than 10°
Warning! Rotating parts!
General information
5
Operator’s Manual City Ranger 2200 Lawn Edger
1.2 EC Declaration of Conformity
Manufacturer: Nilsk-Egholm A/S
Address: Transportvej 27 · DK-7620 Lemvig
Telephone: +45 97 81 12 05
hereby declares that
Machine: Lawn Edger 2200
Type: 22VKS1
· has been manufactured in conformity with the provisions of the Machinery
Directive 2006/42/EU
Place: Lemvig
Date:
Signature:
Knud Olsen, Senior Engineer
General information
6
1.3 Technical data
General information
Operator’s Manual City Ranger 2200 Lawn Edger
Dimensions:
Length (L)
Width (W)
Height with cab (H)
Oset
Assembled:
2,640 mm
1,220–1,370 mm
1,960 mm
150 mm
Storage dimensions:
540 mm
930–1,080 mm
520 mm
Technical data:
Type
Weight of Lawn Edger
Ground clearance below blade, lifted
Max. cutting depth
22VKS1
50 kg
140 mm
95 mm
Attention:
Specications may change without notice.
2
3
1
7
2.1 Assembly / Disassembly
1. The locking handle on the A-frame of the basic machine
must be in the unlocked position. (Picture 1)
2. Drive the basic machine right up to the A-frame of the
Lawn Edger, so the A-frames t into each other.
3. Raise the A-frame by pulling the joystick back until the
Lawn Edger is suspended and free of the ground.
4. Stop the machine.
5. Lift the back of the guard on the Lawn Edger, until
the Lawn Edger falls into place on the basic machine’s
A-frame. (Picture 2)
6. Lock the Lawn Edger in place with the locking handle
on the A-frame. (Picture 2) The locking handle can only be
engaged when the machine has been stopped.
7. Push the lock button down to release the support strut;
pull the strut up until the lock clicks into place. (Picture 3)
Disassembly:
Follow the procedure for tting only in reverse order.
U
n
l
o
c
k
e
d
Locking handle
T
u
r
n
Operator’s manual
Operator’s Manual City Ranger 2200 Lawn Edger
Support strut Locked
Lift the guard Locking handle
L
o
c
k
e
d
1
2
3
8
Operator’s manual
2.2 Before start-up
Transport:
The transport lock prevents the attachment from lowering
during transport.
How to use the transport lock:
Move the handle to the uppermost position. Lift the A-
frame by moving the joystick up. As the A-frame lifts, the
transport lock is automatically activated. (Picture 1)
How to unlock the transport lock:
Unhitch the handle and lift the A-frame to the uppermost
position. The attachment can now be lowered again.
(Picture 2)
2.3 Start-up
1. Start the machine.
2. Start the Lawn Edger by activating the PTO-front.
(Picture 3)
3. Lower the Lawn Edger by moving the joystick down.
(Picture 3)
Warning!
Avoid driving over manhole covers or
similar obstacles as this will damage the
blades and guard.
Warning!
Make sure no one is standing too close to
the machine while it is in use.
N.B!
When turning, the rear of the machine
swings out, so there is a risk of crushing
or collision.
Transport lock – locked
Transport lock – unlocked
Locked
Operator’s Manual City Ranger 2200 Lawn Edger
Unlocked
Joystick PTO-front
2
3
1
150 mm
9
2.4 Adjusting
Adjusting the cutting depth:
Adjust the cutting depth to suit conditions.
1. Stop the Lawn Edger by activating the PTO-front.
(Picture 1)
2. Lift the Lawn Edger up by pulling the joystick back.
(Picture 1)
3. Stop the machine.
4. Loosen the support wheel. (Picture 2)
5. Adjust the support wheel to the desired depth.
6. Tighten the handle again.
Adjusting the breadth:
If the machine is operating in areas with very sharp turns,
the blade can be turned out further to the side.
1. Stop the Lawn Edger by switching o the PTO-front.
(Picture 1)
2. Lift the Lawn Edger up by pulling the joystick back.
(Picture 1)
3. Stop the machine.
4. Loosen the blade’s sideways grip. (Picture 3)
5. Adjust the blade’s position as desired. The blade must
not be positioned beyond the arrow. (Picture 3)
6. Re-tighten the handle.
Operator’s manual
Operator’s Manual City Ranger 2200 Lawn Edger
Joystick PTO-front
Support wheel Handle
Arrow Handle
1
10
2
3
4
2
Removing the bolt
2.5 Changing the blade
The Lawn Edger blade can be changed, allowing the
operator the choice of cutting towards/away from the
machine, depending on the driving direction of the
machine relative to the lawn edge.
1. Lift the Lawn Edger up by pulling the joystick back.
2. Stop the machine.
3. Detach the guard by removing the wing nut under the
guard. (Picture 1)
4. Remove the bolt that holds the guard. (Picture 2)
5. Remove the end piece, pipe and guard. (Picture 2)
6. Fit the other guard on the other side of the pipe, t the
end piece and tighten again.
7. Ret the guard.
Blade for cutting away from the machine. (Picture 3)
Blade for cutting towards the machine. (Picture 4)
Detaching the guard
Operator’s Manual City Ranger 2200 Lawn Edger
Sharp edge
Sharp edge
Operator’s manual
Autres manuels pour City Ranger 2200
2
Ce manuel convient aux modèles suivants
1
Table des matières
Manuels Tondeuse à gazon populaires d'autres marques
RHINO
RHINO 1958 Manuel utilisateur
Wolf Garten
Wolf Garten Compact plus 40 B Manuel utilisateur
Cub Cadet
Cub Cadet LTX 1045 Manuel utilisateur
Craftsman
Craftsman 917.378461 Manuel utilisateur
GGP ITALY SPA
GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur
Challenge
Challenge CH18V2 Instructions de fonctionnement
TALEN TOOLS
TALEN TOOLS AVR HGM30 Manuel utilisateur
DEWEZE
DEWEZE ATM-725 Manuel d'utilisation
Weed Eater
Weed Eater 180083 Manuel utilisateur
Husqvarna
Husqvarna Poulan Pro PP185A42 Manuel utilisateur
Better Outdoor Products
Better Outdoor Products Quick Series Manuel utilisateur
Cub Cadet
Cub Cadet 23HP Z-Force 60 Manuel d'utilisation
