Nikon 25366 - Camera Control Pro Manuel utilisateur

Camera Control Pro Reference Manual

Overview

This section describes the structure of this manual, outlines Camera Control Pro’s

main functions, and gives the system requirements and installation instructions.

Using Camera Control Pro

This section describes how to use Camera Control Pro.

Appendices

This section lists preferences and describes how to uninstall the software.

Important Information on the Product Key

The product key may be found on the CD-ROM case. Do not lose this key. It is required

when installing or upgrading this software and can not be replaced if lost.

xxxxx–xxx–xxxx–xxxx–xxxx–xxxx Product key

SB6E01(B1)

6MS522B1--

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Introduction 3

About This Manual 6

System Requirements

Windows 7

Macintosh 8

Installing Camera Control Pro 9

Windows 10

Macintosh 15

Getting Started

Starting and Exiting Camera Control Pro 20

Getting Help 26

Software Updates 27

Click a page number to view.

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Introduction 1/3

This manual has been written to help you take advantage of the many features included

in Camera Control Pro. Be sure to read this manual thoroughly, and to keep it handy when

using Camera Control Pro.

Conventions

This manual assumes basic knowledge of cameras and Windows or Finder operations. Refer to the

documentation provided with your computer or camera for more information. Where the Windows

and Macintosh versions of the program use diﬀering commands, the Windows menu name is listed

ﬁrst, followed by the Macintosh menu name in square brackets. Where multiple menu items or folders

are selected in sequence, the menu items are separated by a “>”.

Throughout this manual, Windows XP Professional and Windows XP Home Edition are referred to as

“Windows XP.” Windows 2000 Professional is referred to as “Windows 2000.” D1, D1X, and D1H cameras

are referred to as “D1-series cameras,” D2Xs, D2X, D2Hs, and D2H cameras as “D2-series cameras.”

Illustrations

This manual is for use with both Windows and Macintosh. While the majority of the illustrations

come from Windows XP, save where otherwise noted the operations described are the same in

other operating systems. Depending on the operating system used, the dialogs and menus may

diﬀer from slightly from those shown here. Some illustrations are composites.

Printing This Manual

To print this manual, select Print from the File menu in Adobe Reader. This manual is A5 size, al-

lowing facing pages to be printed on a single sheet of A4 paper (to print facing pages, start printing

from an even-numbered page).

Installing/Uninstalling Camera Control Pro

Use an account with administrator privileges to install or uninstall Camera Control Pro under

Windows XP, Windows 2000, and Mac OS X.

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Camera Control Pro

Changes made to settings in the Camera Control Pro window only apply to photographs taken after

the changes are made, not to photographs that have already been taken. Camera Control Pro can

not be used to modify existing photographs.

The controls in the Camera Control Pro window vary with the type of camera connected. More

information on camera settings may be found in the documentation provided with your camera.

Illustrations

Save where otherwise noted, the illustrations in this section show the dialogs displayed when the

D2Xs is connected.

Camera Control Pro for D100 Cameras (Macintosh)

Before using Camera Control Pro with a D100 digital camera under Mac OS X, conﬁrm that the

camera ﬁrmware is version 2.00 or later. Users of earlier versions will need to upgrade the camera

ﬁ r m w a r e b e f o r e u s i n g C a mera Control Pro. Contact a Nikon-authorized service representative for

information on ﬁrmware upgrades.

Introduction 2/3

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Introduction 3/3

Notices

• No part of the manuals included with this product may be reproduced, transmitted, transcribed,

stored in a retrieval system, or translated into any language in any form, by any means, without

Nikon’s prior written permission.

• Nikon reserves the right to change the speciﬁcations of the hardware and software described in

these manuals at any time and without prior notice.

• Nikon will not be held liable for any damages resulting from the use of this product.

• While every eﬀort has been made to ensure that the information in these manuals is accurate and

complete, we would appreciate it were you to bring any errors or omissions to the attention of

the Nikon representative in your area (address provided separately).

Note

The copying or reproduction of copyrighted creative works such as books, music, paintings, wood-

cut prints, maps, drawings, movies, and photographs is governed by national and international

right laws. Do not use in venues where photography or recording is prohibited.

Trademark Information

Microsoft® and Windows® are registered trademarks of Microsoft Corporation. Adobe Reader and

Acrobat are registered trademarks of Adobe Systems, Inc. Pentium is a trademark of Intel Corpora-

tion. Macintosh®, Mac OS, and QuickTime are registered trademarks of Apple Computer, Inc. All

other trade names mentioned in this manual or the other documentation provided with your Nikon

product are trademarks or registered trademarks of their respective holders.

Customer Support

See

Customer Support

Customer Support for information on customer support.

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

About This Manual

How to Use This Manual

The pages of this manual are structured as shown here:

Overview Appendices

Return to ﬁrst page 56

Using Camera Control Pro

Camera Controls 11/12

The Image Processing Tab

The following settings can be adjusted from the Image Processing tab:

Image Optimize

D70sD200 D70 D50

Choose the type of image optimization performed. See the

camera manual for details.

Sharpening Choose how much the camera sharpens outlines. See the

camera manual for details.

Tone Comp

Adjust contrast. See the camera manual for details. Select-

ing “Custom“ or “Custom 1–3 “ (D2Xs only) and clicking Edit

will display

“Edit

Camera Curves

“ dialog

“ dialog.

Color space D2Xs

D2X D200 Choose a color space. See the camera manual for details.

Color Mode

D2-series

D1H D100

D1X

D200 D50

D70

D70s

Choose a color mode. See the camera manual for details.

With the D1, colors are optimized for the NTSC color space,

regardless of the option chosen.

Saturation

D200 D50D70D70s Adjust color saturation. See the camera manual for details.

 Click here to go to the beginning of each of the three chapters. The chapter you are

currently viewing is displayed in a darker color.

 Page title

 Description



Blue underlined text

Blue underlined text indicates a link to another part of this manual or the World Wide

Web. Click the text to follow the link (note that a web browser and an Internet connec-

tion are required to link to the World Wide Web). To return to the previous topic, click

the button in Adobe Reader.

 Click here to return to the ﬁrst page.











Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

System Requirements Windows

Before installing Camera Control Pro, be sure that your system meets the following require-

ments:

CPU 300 MHz Pentium or better recommended

OS Preinstalled versions of Windows XP Home Edition or Windows XP

Professional, Windows 2000 Professional

Hard-disk space 50 MB required for installation, with an additional 1GB of free disk space

available when Camera Control Pro is running

RAM 256MB (768MB or more recommended)

Video resolution 800 × 600pixels or more with 16-bit color (High Color/thousands of colors).

24-bit color (True Color/millions of colors) recommended.

Interface*USB: Only built-in USB ports supported

IEEE 1394: OHCI-compliant IEEE 1394 interface board or card required †

Supported cameras D1-series, D2-series, D100, D200, D70S, D70, D50

Miscellaneous • CD-ROM drive required for installation

• Internet connection required for Nikon Message Center

*Connect the camera directly to the computer. The camera may not function as expected when

connected via a hub, extension cable, or keyboard.

†See the website below for the latest information on boards that have been tested and approved

for use.

Check the support information at the website below for the latest on compatible cameras

and operating systems.

Europe ,Africa:

www.europe-nikon.com/support

Asia, Oceania, Middle East:

www.nikon-asia.com

U.S.A.:

www.nikonusa.com

Additional information may be available from the Nikon representative in your area.

Visit

http://nikonimaging.com/

http://nikonimaging.com/ for contact information.

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

System Requirements Macintosh

Before installing Camera Control Pro, be sure that your system meets the following require-

ments:

CPU PowerPC G3/G4/G5 *

OS Mac OS X version 10.3.9 or later

Hard-disk space 50 MB required for installation, with an additional 1GB of free disk space

available when Camera Control Pro is running

RAM 256MB (768MB or more recommended)

Video resolution 800 × 600pixels or more with 16-bit color (High Color/thousands of colors).

24-bit color (True Color/millions of colors) recommended.

Interface†USB: Only built-in USB ports supported

FireWire: Only built-in FireWire ports supported

Supported cameras D1-series, D2-series, D100, D200, D70S, D70, D50

Miscellaneous • CD-ROM drive required for installation

• Internet connection required for Nikon Message Center

*Operation not guaranteed on Intel-based Mac computers.

†Connect the camera directly to the computer. The camera may not function as expected when

connected via a hub, extension cable, or keyboard.

Check the support information at the website below for the latest on compatible cameras

and operating systems.

Europe ,Africa:

www.europe-nikon.com/support

Asia, Oceania, Middle East:

www.nikon-asia.com

U.S.A.:

www.nikonusa.com

Additional information may be available from the Nikon representative in your area.

Visit

http://nikonimaging.com/

http://nikonimaging.com/ for contact information.

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Installing Camera Control Pro

Before installing Camera Control Pro:

• Conﬁrm that the computer satisﬁes the

stem requirements

stem requirements for Camera Control Pro.

• Exit any other applications that may be running, including anti-virus software.

Follow the links below to view installation instructions for your operating system:

Existing Versions of Camera Control Pro

If an existing copy of Camera Control Pro is detected during installation, a notiﬁcation will be dis-

played. Follow the on-screen instructions.

Windows Macintosh

Using Camera Control Pro Appendices

Return to ﬁ r s t page

Overview

Installing Camera Control Pro Windows 1/5

Use an account with administrator privileges when installing Camera Control Pro.

The “Install Center” window

Start the computer and insert the Camera Control Pro CD in a CD-ROM drive. The “Select

Region” dialog will be displayed; select a region and click Next. A language-selection dia-

log will be displayed; select a language and click Next to display the “Install Center” win-

dow.

If the “Select Region” dialog Is Not Displayed

To display the “Select Region” dialog, select My Computer from the Start menu (Windows XP) or

double-click the My Computer icon on the desktop (Windows 2000) and double-click the CD-ROM

(Camera Control Pro) icon in the My Computer window.

To uninstall Camera Control Pro, see

Uninstalling

Camera Control Pro

Camera Control Pro.

Easy Install: Install the minimum

software needed to run Camera

Control Pro.

Custom Install: Install selected software.

Manual: Open the “Manuals” folder,

which contains software instruction man-

uals. Double-click INDEX.pdf to view a

region selection screen. This button is not

displayed in the trial version.

Customer Support: View the ReadMe

ﬁ l e o r v i s i t Nikon technical support web-

sites (Internet connection required).

Try other Nikon Software: Download

trial versions of Nikon software (Internet

connection required).

product on-line (Internet connec-

tion required). This button does not

appear in some regions.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nikon Logiciel

Nikon

Nikon Nikon View Guide de démarrage rapide

Nikon

Nikon Capture 3 Manuel utilisateur

Nikon

Nikon CAPTURE NX2 Manuel utilisateur

Nikon

Nikon 25338 Manuel utilisateur

Nikon

Nikon Fun >Touch 4 Manuel utilisateur

Nikon

Nikon DI series Feuille d'instructions

Nikon

Nikon 9235 - Coolscan III Manuel utilisateur

Nikon

Nikon View DX Manuel utilisateur

Nikon

Nikon Digital Cameras Manuel utilisateur

Nikon

Nikon Nikon View Mode d’emploi

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur