Nikki.Amsterdam The.Diffuser Manuel utilisateur
The.Diffuser User Manual
1
GENERAL SPECIFICATIONS
GENERAL FEATURES
Ultrasonic vapor diffuser maintains original efficacy of essential oils, instead
of destroying their original molecular structure by heating or burning them.
2.4MHz Advanced Ultrasonic Technology.
Timer : steady on, 1hour,3hours.
LED models:7colors slow color changing,fixed single color select.
Support smart phone application control.
The smart phone operating system：Android and IOS.
Compatible with Amazon Alexa, Google play.
Input voltage
AC100-240V 50/60HZ
Power consumption
Max 12(W)
Max.Noise
36(dB)
Dimensions
(ψ)154x(H)188(mm)
Water tank capacity
300(ml)
Material
PP\leather
Accessories
Power Supply,measure cup,User Manual
Ultrasonic frequency
2.4MHz
2
PART NAMES
LIGHT/WIFI button
Upper
MIST button
AC Adapter
Water Tank
Base
Timing Indicator
WIFI
Indicator
WIFI Indicator
Drainage Side
Air Outlet
DC Power Input
Air Inlet
Water Outlet
3
HOW TO USE
1.Put this product on a horizontal position, remove the upper vertical
direction.Fig.1.
2.Connect the AC adaptor to the DC jack on the bottom of base.
3. ①Add water to the tank. Pay attention to water level and do not exceed
maximum level on water tank(Do not use water hotter than 45 ° C, to prevent
damaging the atomizer; Do not use dirty water to prevent clogging and damaging
the atomizer).
②Drop essential oil into water tank vertically. Quantity should be about 2-3 drops
(about 0.1 – 0.15 ml. Use only water-soluble essential oils to guarantee good
aroma-diffusion effect.) Fig. 3.
4.Replace the upper to the original position. Fig. 4.
Note:
You must close the upper when you want to use the product.
Fig.1 Fig.2 Fig.3 Fig.4
4
5.Press “MIST” button to choose your desired mode.Short press the “MIST” button
to choose the timer from 1H/3H or ON. Keep pressing the “MIST” button over 5
seconds to choose the spray output between strong or small.Fig. 5.
Tips: The machine would be automatically detect water shortage and power-off protection.
6."LIGHT" button ( WIFI paring button ).
①Press the "LIGHT" button to turn on the LED light, the color will change
automatically.Press the "LIGHT" button again to fix the color.Fig. 6.
②WIFI paring function: Press and hold down “LIGHT” button,WIFI connection
mode is on. If the WIFI indicator is always on, WIFI is in normal mode. If the WIFI
indicator flashes, WIFI is into the pairing mode.
IMPORTANT TIPS:
Mist quantity gradually increases as water level decreases. However, when water reaches 1/3
water level, mist quantity begins reducing. This is normal, and is not a device malfunction.When
water is completely depleted, the device turns off automatically and the indicator light goes out.
Fig.5 Fig.6
5
How to use the smart phone APP to control the
device
1. Download the APP
Step 1: Scan QR Code And
Step 2: Register
Download Smart Life APP
Step 3: Entry Account Step 4: Add Device
6
Step 5: Select Humidifier Step 6: Add Device
Attention:
1.In the registration process, the prompt “reset” button” is the “LIGHT ” button of the device.
2.In step 6,please make sure WIFI indicator light rapidly flashing and then next step.If indicator
light is not rapidly flashing, tap"How to make indicator rapidly blink" to view operation processes.
Step 7: Modify The Name Step 8: Enter The Control Page
7
2. Entry into Smart APP Homepage
1.Settle mist working time.
2.Control spray open / close.
3.Set Spray Mode- Strong Mode / Small Mode.
Spray
8
LED
1.Set LED color - color changing / select color.
2.Click the circle and select one color.
9
1.Set the mist time or light time.
2.Adjustment mist time.
Timer
Table des matières
