Nicky Clarke NSS189 Manuel utilisateur

Wide Plate Hair Therapy Straightener
Model No: NSS189
INSTRUCTION BOOKLET
HOUSEHOLD USE ONLY
Please READ and RETAIN for future reference

Aftersales Service
This appliance is built to the very highest of standards. There
are no user serviceable parts. If the unit fails to operate
correctly, please follow these steps:
1) Check the instructions within this booklet have been
followed correctly.
2) Check the socket is powered and working using another
appliance.
3) Check the fuse in the plug has not blown.
4) Check the mains supply is functional.
5) Check the appliance is switched on. DO NOT Open the
case of the product or attempt anything other than basic
cleaning maintenance.
6) Leave the product to cool for 30 minutes and check
whether it works again.
If the appliance still fails to operate then please contact us at
the below BEFORE returning to place of purchase:
For Customer Services please call 0345 209 7461
Or visit us at www.nickyclarke.com
PLEASE RETAIN
FOR FUTURE REFERENCE
Thank you for purchasing your Nicky Clarke Hair Therapy Straightener.
To get the best from your new straightener, take a few moments to read
these instructions and keep them in a safe place for future reference.
Should you require any further assistance, our friendly Customer Service
team will be happy to help.

Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
WARNING:
•It is hazardous for anyone other than a competent
person to carry out any service or repair operation that
involves the removal of a cover which gives protection
against exposure to electrical parts.
•This product is intended for household use only. DO
NOT use outdoors.
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance
shall not be made by children unless they are older than
8 and supervised. Keep the appliance and its cord out of
reach of children less than 8 years.
•DO NOT wrap the cord around the appliance.
•DO NOT immerse in water or other liquids for cleaning.

•EU ONLY: If this appliance is used in a bathroom you
MUST install a residual current device (RCD) with a rated
operating current not exceeding 30mA in the electrical
circuit supplying the bathroom. An electrician will advise
you of this.*
•If the straightener is used in a bathroom, unplug it
immediately after as the proximity of water presents a
hazard even when the straightener is switched off
•DO NOT store or use the unit outdoors or on wet
surfaces.
•DO NOT handle the plug or appliance with wet hands.
•Use only as described in this manual.
•DO NOT abuse the power cord; never carry the
appliance by the cord or pull cord to disconnect from an
outlet; grasp the plug and pull to disconnect from an
outlet.
•Keep clothing, fingers, and all parts of the body clear of
hot parts.
•NEVER leave the appliance unattended when switched
on.
•NEVER remove parts from the appliance such as the
case, screws and so on.
•Only use the accessories supplied by the manufacturer.
•NEVER put any objects into the openings on the outer
case.
*The fitting of an electrical socket for, or capable of, operating the
appliance, is not permitted in the UK. Nevertheless, European
standards require us to include this warning in these instructions

•This appliance is authorized for household/residential
use only DO NOT operate this appliance for anything
other than its intended use.
•DO NOT allow to be used as a toy. Close attention is
necessary when used by or near children.
•Children should be supervised to ensure they don’t play
with the appliance.
•Use only as described and for the uses described in this
manual.
•DO NOT use the appliance if the power cord or plug has
been damaged.
•DO NOT use appliance if it has been dropped, damaged,
left outdoors, or dropped in water. Contact customer
services for advice.
•Keep power cord away from heated surfaces (e.g.,
cooking surfaces).
•NEVER use the appliance near showers, bathtubs,
basins, or other vessels containing water.
•DO NOT put any objects into openings.
•Keep free of dust, lint, and hair.
•Turn off and allow to cool the straightener before
storing.
•Always allow the appliance to cool on a heat resistant
surface before cleaning and storing it.
For Customer Services please call 0345 209 7461
Or visit us at www.nickyclarke.com

Feature Diagram
The illustrations in these instructions may differ slightly from the actual unit
supplied.
A)Ceramic Plates
B) Temperature Touch Control
C) On/Off Button
D)Swivel Cord
E) LED Temperature Display
For Customer Services please call 0345 209 7461
Or visit us at www.nickyclarke.com

Preparing for Use
1) Remove all packaging and keep it safe until you are
satisfied with your product
2) DO NOT plug in the straightener until you are ready to
use it
3) Check the unit for any visual damage such as:
a. Misaligned or damaged parts
b. Damage to the body, plug or power cord
4) If you can see any damage do not use the straightener
and contact customer services.
Tourmaline Technology
Your Nicky Clarke hair straightener uses tourmaline
technology which helps make hair softer and easier to style.
Tourmaline is a precious stone that has been finely crushed
and added to the ceramic coating, promoting natural benefits
for the hair.
For Customer Services please call 0345 209 7461
Or visit us at www.nickyclarke.com

Using Your Straightener
Please be aware that your straightener can become very
HOT! Do not touch the ceramic coated plates.
1) Ensure your hands are dry and your hair is completely
dry and tangle free before using your straightener.
2) Ensure there is no moisture on the appliance, or on the
plug
3) Plug the unit into a suitable mains supply and switch on,
the On/Off button will illuminate red.
4) Ensure that the arms of your straightener are fully open
while they are heating.Always place your straightener
on a solid, flat, stable, heat resistant surface. Do not
place your straightener on a soft or uneven surface such
as a carpet, bedding or rug and never cover your
straightener. The plates reach high temperatures very
quickly.
5) Switch your straightener on by holding the on/off
button for 2-3 seconds. The On/Off button will
illuminate blue, and the touch panel will begin flashing.
The plates will rapidly heat up and be ready for use
within seconds when the temperature displayed
becomes solid. The bloom light will remain flashing
whilst the straightener is on.
NB: As with all products that reach salon high
temperatures, do not use your straightener too
frequently to avoid damaging your hair.

6) To adjust the temperature, tap on the Temperature
Control Bloom light, the selected temperature will
illuminate below the pad.
7) Separate a section of hair approximately 5cm in width
and smooth it out with a brush.
8) Place the chosen section of hair between the plates of
your straightener and close the plates. Take care not to
touch the plates which are very hot with your fingertips.
Hold the straightener in place until the section of hair is
fully heated. This will be almost instantaneous.
9) Once your hair is heated, carefully slide the plates in one
smooth movement all the way down to the ends of your
hair whilst holding it taut.
10) Keep the section of hair smooth whilst you work in
order to avoid ridges and kinks.
11) Switch off by pressing the On/Off button for 2-3 seconds
and unplug your straightener immediately after use.
Always allow your straightener to completely cool down
on a heat proof mat before storing.
Cleaning and Maintenance
To ensure your straightener remains at its optimal
performance, it will require regular cleaning and
maintenance.
1) Switch the straightener off, unplug from the mains,
allow to cool fully, and discharge any residual charge by
pressing the On switch to the On position, before
returning to Off.

2) Wipe over the casing using a soft damp cloth (if
necessary a very small amount of washing up liquid may
be used on the outer case only). DO NOT immerse the
unit in water or any liquid.
3) DO NOT use any harsh abrasives or cleaners as these
will damage the appliance.
NEVER ATTEMPT TO CLEAN THE STRAIGHTENER BY
INSERTING ANY IMPLEMENT
If you have long hair or use large amounts of styling
products, clean the plates regularly i.e. once a month
Troubleshooting
Your straightener will stop working if it has overheated.
1) Unplug the straightener.
2) Allow it to cool completely.
3) Clean the plates.
4) Plug your straightener in and use normally.
In the unlikely event that your straightener continues to
overheat, unplug it and contact customer services.
Storage
Ensure your straightener is completely cool and dry. Do not
wrap the supply cord around your straightener. Store your
straightener in a cool, dry, safe place out of the reach of
children.
For Customer Services please call 0345 209 7461
Or visit us at www.nickyclarke.com
Table des matières
Autres manuels Nicky Clarke Fer à coiffer





















