LED 5W
!
★ When the red capacity indicator is on, or the recycling time is more than 8s, it means that
the power isn't enough. Please charge in time, or the battery would be damaged, or can't
be charged any more.
★ When charging, plug the DC output end of charger into the battery DC socket, then insert
the charger plug into the AC100-230V power socket.Now the indicator of charger is red.
When fully charged, the indicator will turn green, the charger will be shut off and stop
charging.
★ After many times flash, the flash would stop working for the inner safety protection. At this
time, it needs to be cooled for 30mins, then restart to work. When the battery has fully
charged, the battery needs to be cooled for 30mins for the inner safety protection.
★ If the LCD brightness is very dark or battery power indicator is very low, please change new
batteries in time.
X.Warm tips
Warranty : Our company offer 12 months manufacturer warranty for the flash and 3 months
for the battery.(Battery can be fully charged and discharged for 300 times in theory)
XI.Repair & Maintenance
Preservation method: Please preserve the equipment with this method, so as to ensure its
function and usage stability.
1. After using, please shut off all the switches and power, take out the battery, so as to avoid
electricity leakage or self discharge.
2. Install the reflector on the light head, put all the accessories with poly bags,
and put them back to the Al-case, at last don't forget to place the total equipment at dry &
low temperature environment.
3. If leaving it for long time, please charge it once a month, and make it flash 5-10times. If the
battery hasn't been maintained for long time, is will be unavailable, get wet or cause the
main equipment damaged.
XII.Specifications
Model
GN
Power range (1/128-1/1) 8 f-stops power range with ±0.3th precise intervals
Flash time(full power)
Battery charging time
Color temperature
Recycling time
Protective device Overheating protection
Triggering way
Modeling bulb
Buzz
Power source
Li-ion battery
Battery charging way
Flash channel&group
Transmitter channel&group
Transmitter battery
Built 2.4GHz remote control/Test button/
Sync cable/Optical slave
Yes (ON/OFF)
Interchangeable&memoryless Li-ion battery/AC100-240V
power source(need power adapter)
Plug-in charging type
16 channels, 3groups
16 channels,7 modes of group setting
AA1.5V*2
1. Please don’t disassemble, repair or change the equipment, because there is high voltage
inside. Unauthorized persons shouldn’t repair it. Or it will be treated as giving up the warranty.
2. Don’t put it in 50℃+ place for a long time, don’t let it get wet, as well as avoiding metal pieces
or sand getting into the body.
3. Don’t use it in a damp, frigid or high temperature, as well as inflammable and explosive
environment.
4. Don’t let children play with the equipment, and put it out of children’ s reach for storing.
5. Neither stare at the flash tube, nor touch the flash tube or modeling bulb.
6. After using, please shut off the power switch so as to cut off the power, or take out the battery.
7. When continuously flash many times, as there are self-protection inside, the protection
program will be on, the flash will stop working. It needs to be cooled for about 30
minutes, then it can start to work again.
8. If the battery has just finished charging, for the protection inside the battery, it needs to be
cooled for 30 minutes, then put it into the light body to work.
9. When the LCD brightness is very dark or battery power indicator is very low, please
change new batteries in time to avoid the leakage flash or short trigger distance.
10. Please use the matched flash and transmitter to the camera brand(Don’t use the Canon
transmitter on Nikon cameras).Mixed use may damage the transmitter.
XIII.Warning
Must take out the battery before maintain or cleaning the equipment.
XIV.How to solve the common faults
Fault phenomenon Fault reason How to solve
Flash tube can not flash
Battery power is low Change a new battery or finish
fully charged
Power switch has not turned on
Battery has not been fit well
Flash tube has been damaged
(Note,except the above problems,if the recycling
indicator appears"OK".while press the test button,it
doesn't flash, means the flash tube is damaged)
Turn on power switch
Press the battery downwards until
hearing a sound of “click”
Ask for the help from professional
person to change a new flash tube
Battery cannot output
any power energy
Battery is not fully charged. Check if the charger is in good
condition.(use another good one to check)
Battery can't be charged any more.
Make the battery cool for 30 minutes, and
the temperature sensor switch will be on
automatically ,then start to charge again.
Battery has been damaged. Battery has pasted its lifetime,
should change a new one.
Remote trigger can not
work
(Note: if recycling indicator is ok,
test button can trigger the flash)
Transmitter has not turned on.
Transmitter batteries have used out
Channel and group have not been
set well
Push the transmitter switch to "ON".
Change new remote trigger batteries.
Set the same channel & group of
flash & transmitter
The flash shut off
automatically, or can
not be turned on
The inner protection is on, power
source is cut off automatically.
Battery capacity has run off
Power switch is not turned on
Let the flash body cool down, then
restart the flash
Change a new battery or charge the
battery.
Turn on the power switch
It can not remote control
the flash unit with high
speed sync when the
transmitter is on the
camera.
Turn on the transmitter then keep pressing the “RST” button for 3s until the
indicator is blinking. Then reset the channel and groups of transmitter and
flash unit.
Transmitter is not compatible with the camera,should choose the
corresponding special transmitter for the right camera brand.
11.1V-6600mAh
87
TTL-480C TTL-680C
56 68
5500K±200K
700 500
0.1~4.5s 0.1~5.5s
6 hours(with self-protection)
