NGTeco NG-C4200 Series Manuel utilisateur
Important notes
1. Please read this manual carefully or contact customer
service for any questions.
2. This device only works with 2.4GHz Wi-Fi networks. If you have a dual-
band router with both 2.4GHz and 5GHz networks, make sure your
phone is connected to the 2.4GHz one.
3. Make sure the entered Wi-Fi password is correct when
adding a new device.
4. For a stable network connection, please make sure the device is
placed near the router.
5. Do not install the camera before confirming successful network
connection and smooth live video.
6. Please make sure the power adapter and ethernet port are
waterproof to avoid water leakage after mounting the
camera outdoors.
7. Due to regular updates of the application and products, we
cannot guarantee exact consistency between the actual product
and the information written in this manual.
two Fast guide
Table of Contents
Contents 4
Product description 4
Setting 5
Connecting the Device with the NGTeco Home App 5
Review Recordings from Browser 7
* Device connection with Amazon Alexa or Google Assistant 8
Facility 9
Installation location 9
Installation steps 9
Product characteristics 10
NG-C4200 series 3
Contents
current waterproof (anchors, screws
of the plate
mounting)
fast
Product description
4Fast guide
Setting
Connecting the Device with the NGTeco Home App
Step 1: Download the App and Register your Account
Find the appNGTeco Homeon the Apple App Store or Google Play Store and
download the app to your mobile phone.
open the appNGTeco Homeand sign in with your account. If you don't have an
account, create an account with your phone number or email.
Step 2: Power on the Device
1. Connect the camera to the wall outlet with the supplied power supply.
2. Wait a few seconds until you hear the audio message “Welcome to use
the smart camera.”
Note: If you did not hear the message, press and hold the Reset Button
for 5 seconds until you hear the message “Reset OK, please wait for
reboot”.
NG-C4200 series 5
Step 3: Add the Device to the App
Method 1: Connection by Scan Code
1. Open the app, tap on the “+” button on the upper right corner of the
interface, and then select the option “Add Device”.Select option “Smart
Camera”and then choose the corresponding model purchased.
2. Check “Following"if you have finished the above steps in the interface. Select
the desired Wi-Fi and enter the correct password. Then touch the button “
Following".
3. Show the QR code towards the lens of the device and the device will scan the
QR code. Once you hear the audio message “The camera is configured,
Connected to the network”,touch the button “Hear the warning tone”on your
mobile, the app will connect the device automatically.
Note: Hold the phone about 15-20 cm away from the device. You can
slightly move your mobile device back and forth for better scanning.
4. Once you see the message “Added successfully”In the app, you can
edit the device name manually. Touch the button “Finalized" to complete
the setup.
Note: If you were unable to connect your device to Wi-Fi, please press
and hold the Reset Button for 5 seconds until you hear the audio
message “Reset successfully, please wait for reboot”.
6Fast guide
Method 2: LAN cable connection
1. Open the app, tap on the “+” button on the upper right corner of the
interface, and then select the option “Add Device”.Select option “Smart
Camera”and then choose the corresponding model purchased.
2. Change the connection mode at the top right to mode “Cable". I dialed
"Following"if you have finished the above steps in the interface. Select
the desired Wi-Fi and enter the correct password. Then tap on the “Next”
button.
Note: Make sure to connect the camera to your home router using the Ethernet
cable.
3. The app will search the camera automatically and then click the button
“+”to add the corresponding camera.
4. Once you see the message “Added successfully”In the app, you can
edit the device name manually. Touch the button “Finalized" to complete
the setup.
Note: If you were unable to connect your device to Wi-Fi, please press
and hold the Reset Button for 5 seconds until you hear the audio
message “Reset successfully, please wait for reboot”.
Review Recordings from Browser
1. Please visit https://ipc-us.ismartlife.me and then select the corresponding
data server in the upper right corner of the interface.
2. Use NGTeco Home app to scan the QR code to login your account.
3. Click on the corresponding device to view the live videos.
NG-C4200 series 7
* Device connection with Amazon Alexa or Google Assistant
After successfully connecting the device to the NGTeco Home app, tap
the buttonEDITat the top right corner of the device interface. Select the
Amazon Alexa or Google Assistant icon, then follow the on-screen
instructions to link your NGTeco Home account to Amazon Alexa or
Google Assistant.
After setup is complete, you can use supported voice commands
including:
• Echo, show me <device name>.
• Hey Google, show me <device name>.
Note:
1. After changing the name of the paired device, refresh the account
again to update the name.
2. This voice control function is optional, it is only compatible with NG-
C42XXA.
8Fast guide
Facility
Installation location
The device can be placed on the ceiling or wall, or it can be placed in a
horizontal position. Choose a location with a clear view to have a wide
unobstructed field of view and a good wireless signal for your device and
you can easily reach a power outlet.
Installation steps
After confirming a successful Wi-Fi connection and smooth live video,
you can select the required position to mount the device. The installation
steps are as follows:
1. Drill four holes on the wall according to the camera base hole
positions, and then insert the plastic anchor into the holes; Anchors are
required for walls made of hard materials such as concrete, brick, or
stucco.
2. Fix the camera to the wall with four screws.
3. Adjust the viewing angle by reviewing the live video on the mobile app.
Note: Please fix the provided Waterproof Kit on the ethernet interface to avoid
possible water seepage.
NG-C4200 series 9
Product characteristics
Sound
Image Quality
Screenshot Speak
Full screen Engrave
Main interface
Picture quality:To switch the image quality between HD and SD.
Sound:Mute or unmute the device.
Full screen:Touch it to switch to full screen.
Take photos:Take a picture in the photo album in the APP.
Speak:Tap it to talk to people in front of the device.
Engrave:Manually record a video in the photo album in the APP.
Play:View the videos recorded on the Micro-SD card.
Photo album:Review the recorded photos when motion is detected.
Theme Color:Change the UI theme to light mode or dark mode.
10 Quick Guide
Table des matières
Autres manuels NGTeco Caméra de sécurité
