Power on the TV set and select video input mode.
1. Turn on the player and adjust the FUNCTION
control to DVD for BOX model or DVD/DVB for
BOX TV model. and press DVD/DVB or MODE but-
ton to select DVD play mode.
2. Open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray and the playback starts
automatically.
5. When a menu screen appears on the TV, move
the navigation buttons or press the numeric but-
tons to select a preferred track number to start
playback.
Adjust the volume to your favorite by rotating the
volume control.
Press NEXT SKIP or PREV SKIP button once during
play to skip a chapter(DVD) or a track (CD) ahead
or backwards.
During playback, press F.FWD button or F. BWD
button several times to scan the disc forward or
backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
Press PAUSE/STEP button during playback to pause.
during pause mode, each time the PAUSE/STEP
button is pressed, the player will only play one
frame; to resume normal play, press PLAY button.
Press STOP button during playback to stop play-
back; the player activates its resume function
when STOP is pressed in PLAY mode; press PLAY
button again, playback resumes at the point it
stopped previously; open the disc tray or press the
STOP button one more time to clear the resume
function.
Press SLOW button on the remote control during
playback, the disc will be played at 1/ 2 normal
speed at rst, each time this button is pressed,
the play speed becomes slower (down to 1/7
normal speed.) Press PLAY button, normal play will
resume.
Press REPEAT 1/all button during play, it will repeat
play one chapter/title or repeat all (for DVD disc),
or repeat play a track or all tracks (for CD), or
repeat the specied points (A-B).
1. Press SEARCH button during play and highlight
the item to be played (Title, Chapter, or Chapter
time)by navigation buttons.
2. Input the desired number or time via the
numeric buttons.
3. Press ENTER button to conrm and the playback
from the located scene starts.
4.To exit search menu, press SEARCH button
directly.
1. Press PROGRAM/EPG during playback to display
the program menu.
2. Select location(s) to be memorized via naviga-
tion buttons and then enter desired Titles/
Chapters numbers via numeric buttons.
Note: Inputting leading zero is not necessary. If the
chapter/title/track number is behind the cardi-
nal 10, press the +10 rst and then another unit
digit. Some gure inputs may be useless, because
it’s greater gure than total title/chapter/track
number on the disc. Example:
Track 3, press “3”
Track 12, press “+10” and then “2”
Track 21, press “+10” twice, and then “1”
3. To start programmed playback, select PLAY
on the menu and press SELECT button on the
remote control; pressing PROGRAM button again
to exit programming.
