You can configure the Nexvoo NexPod USB video device on the Web management.
You can configure the following settings on the Web management.
• View device information
• Camera Tracking
• System update & reset
• Change password
• Restore default settings
Note: Web management only supports Windows system.
1. After NexPod is connected to the power supply, it will automatically turn on, and
connect NexPod to your computer via USB. The computer will automatically
install NexPod USB Audio, USB Camera and Remote NDIS drivers, then open
the computer device manager to view the installed USB devices.
(Set Windows 10 system as example)
Network configuration
Web Management
