NexusLink GCA-2000-KIT Fiche technique

Connect one adapter to the

LAN port on the Network

Device (Modem/ Router) via

an Ethernet cable.

Connect the second

coaxial cable to the “G.hn”

connector of the other

Coax Adapter and to a

coax wall outlet.

Plug the adapter into a power outlet via the power

adapter. Note: If the Power LED is not GREEN,

then please refer to the FAQs on the back page.

Reset

1. It takes two adapters to create a G.hn Coax Network. If you are adding onto an existing G.hn Coax Network,

then please skip to Step B. If you are adding on to an already securely paired G.hn Coax Network (i.e. the

Security LED is GREEN), then you must complete Step C.

Get To Know Your G.hn Wave 2 Coax Adapters

The Power LED,

Connection LED, and

Ethernet LED should

be GREEN on both

adapters.

GCA-2000-KIT G.hn Coax Adapter Kit

Quick Installation Guide

Connect the coaxial cable to the

“G.hn” connector of the Coax

Adapter and to a coax wall outlet.

Network Device

(Modem/Router)

Coax Outlet

Power Outlet

A) Set Up the First Adapter Near Your Network

Device (Modem/Router)

Plug this adapter into a power outlet via the power adapter.

Note: If the Power LED is not GREEN, please refer to the FAQs.

Now connect the adapter

into your Internet device

(i.e. Gaming Console, PC,

etc.) via an Ethernet

cable.

Gaming Console

Coax Outlet

Power Outlet

B) Set Up the Second Adapter Near Your

Internet Device

(Smart TV, Gaming Console, PC, etc.)

2. We do not recommend using this G.hn Coax Adapter if you receive Cable & Satellite TV services. If this is your

situation, please contact our Tech Support at (855) 313-4433 to discuss alternative options for your connectivity.

This connector is

for non-Cable

traditional TV

services.

This connector is to

power the adapter.

This connector is to

connect the adapter

to the G.hn Coax

network.

This Ethernet port

connects to the

Network Device or

Internet Device.

The Button and LED

descriptions can be found on

the back page.

Right

Left

IMPORTANT: Read Before Setting Up the Adapter

Press the Security Button

on one adapter until you

see the Security LED

start blinking GREEN.

Reset

Within two minutes,

press the Security Button on the second adapter

until you see the Security LED

start blinking GREEN.

Reset

Security Button

Power

Connection

Buttons

Q: Which connector should I use to connect my Coax Outlet to the Coax Adapter?

A. Please use the G.hn connector – it is used to transmit networking traffic between your

home networking device.

Q. When should I use the TV Out connector?

A. The TV Out connector is to be used only when transmitting CATV (Community Access

Television/ Community Antenna Television) to your TV.

Q: Is the GCA-2000 interoperable with MoCA adapters?

A: No, it is not. If a location has implemented MoCA over Coax to deliver Internet service,

the G.hn over Coax solution will not work in those specific locations due to frequency

conflict issues with MoCA over Coax.

Q: Can I use G.hn Wave 1 and G.hn Wave 2 on the same network?

A: We do not recommend using G.hn Wave 1 and G.hn Wave 2 together in a single

network.

Q: What should I do if my GCA-2000 will not power on?

A: If your GCA-2000 adapter will not power on, then try using a different power adapter to

determine if the power adapter is faulty.

Q: What should I do if my devices will not connect?

A: If your GCA-2000 adapters are not connecting (i.e. the Connection LED is OFF),

then first plug the problem GCA-2000 unit into a coax outlet next to the other GCA-2000

unit; both GCA-2000 having been connected by Ethernet cable to their respective devices

(i.e. Network Device, Smart TV, PC, etc.). After approximately 10 seconds, the Connection

LED should light up GREEN. If not, then first reset both devices by pressing the Reset

Button on each adapter for more than 10 seconds. Then go to Step B in the Quick Install

Guide and follow the installation steps.

D) The device is now part of a

G.hn Coax Network!

C) Optional: Create a Secure G.hn Coax Network by Pairing

Buttons & LEDs Descriptions

The Security LED

should be solid

GREEN on both

adapters when

they are

successfully

paired.

First Adapter

Second Adapter

Reset Button

LEDs

Push this button for more

than 2 seconds to securely

pair the network.

Push this button for 10

seconds (until all of the

LEDs on the device blink)

to reset the device to

factory default.

Security

Ethernet

Adapter is powered on.

Adapter is powered off or

faulty.

Coax connection rate is

more than 40Mbps.

Coax connection rate is

less than 40Mbps and

more than 5Mbps.

Coax connection rate is

less than 5Mbps.

There is no coax

connection.

Ethernet LAN connection

is established.

An Ethernet LAN

connection is not

established.

Data over the Ethernet

LAN connection is being

transmitted.

The adapter is secure (it

has received or

generated network keys).

The adapter is not secure.

The adapter is in the

process of being secure.

Frequently Asked Questions

Need More Help?

(855) 313-4433

support@nexuslinkusa.com

https://nexuslinkusa.com/product/gca-2000-kit

Call

Visit our webpage

for FAQs/ User

Manual/ Videos

To add additional Coax Adapters, follow

Steps B and C.

Important Note: If you are adding on to an already securely paired G.hn Coax Network, then you must complete this Step.

You can have up to 16 G.hn Coax Adapters in one G.hn

Coax Network.

Blinking

WARNING ( ATTENTION )

Unplug the power supply from the device before

servicing

For indoor use only

Do NOT open the casing

Do NOT use near water

Keep away from the fire

For use in ventilated environment / space

Débranchez l'alimentation électrique avant l'entretien

Cet appareil est conçu pour l'usage intérieur

seulement

N'ouvrez pas le boîtier

N'utilisez pas cet appareil près de l'eau

N'approchez pas du feu

Veuillez utiliser dans un environnement aéré

Power Specifications ( Alimentation ) :

Input 12Vdc, 1A

Autres manuels pour GCA-2000-KIT

Autres manuels NexusLink Adaptateur

NexusLink

NexusLink GPL-1200-KIT Manuel utilisateur

NexusLink

NexusLink GPL-1200WN Manuel utilisateur

NexusLink

NexusLink GPL-1200PT Manuel utilisateur

NexusLink

NexusLink GPL-2000PT Manuel utilisateur

NexusLink

NexusLink GPL-2000PT-KIT Manuel utilisateur

NexusLink

NexusLink GPL-2000S4 Manuel utilisateur

NexusLink

NexusLink GCA-1200-KIT Manuel utilisateur

NexusLink

NexusLink GCA-1200 Manuel utilisateur

NexusLink

NexusLink GPL-1200-KIT Manuel utilisateur

NexusLink

NexusLink GPL-2000PoE Manuel utilisateur

NexusLink

NexusLink GPL-1200PT Manuel utilisateur

NexusLink

NexusLink GPL-1200WAC Manuel utilisateur

NexusLink

NexusLink GPL-1200WAC Manuel utilisateur

NexusLink

NexusLink GPL-1200POE Manuel utilisateur

NexusLink

NexusLink GPL-1200WN-KIT Manuel utilisateur

NexusLink

NexusLink GPL-2000WAC-KIT Manuel utilisateur

NexusLink

NexusLink GPL-2000S4 Manuel utilisateur

NexusLink

NexusLink GCA-2000-KIT Manuel utilisateur

NexusLink

NexusLink GPL-1200POE Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur