Nexus Cidron Standard Reader Manuel utilisateur
CIDRON
Installation guide
Cidron Standard Reader
Cidron Combi Reader
2Cidron Standard Reader -
Technical specifications
Operating frequency 13,56MHz.
Reading technologies
MIFARE CSN 4 byte, MIFARE CSN 7 byte, MIFARE Classic, MIFARE Plus,
MIFARE DESFire 0.6 and MIFARE DESFire EV1.
Also supports other ISO 14443 A/B* compatible cards.
*Not all ISO14443 B cards have been implemented in the reader, please contact
Nexus for more details on current status. MIFARE is a registered trademark of
NXP B.V. and is used under license.
Secure Access Module
(SAM):
MIFARE SAM AV2, external SIM card
connection slot.
Communication
protocols
Wiegand, Clock/Data, OSDP 1, OSDP 2 (including Secure channel),
RS232 and RS485.
Reading output format 24-1024 (excluding parity bits)
Keypad output format Wiegand 4bit, Wiegand 8bit (Dorado), Wiegand 26bit, OSDP ASCII format.
Keypad
12 digit keypad in 4 rows of 3 keys in each row with configurable
backlight in blue color. Control features On/Off/Auto indicators.
Light itensity can be adjusted.
Indicators LED, Green, Red and Yellow (Bi-color). Backlight in blue color. Buzzer.
Power supply 9 – 30VDC
Current consumption
24VDC idle mode with heater inactive 40 mA**
12VDC, idle mode with heater inactive 50 mA**
**Current consumption differs depending on functionality used
and can also be limited in the reader configuration.
Input/Output 4 input for LED and buzzer and 2 configurable
input/output.
Tamper alarm Built-in mechanical tamperswitch which allows for
indication both break off protection and opening of the reader.
Operating temperature
–40° – +70°C
When installing readers in environments with extreme heat
(above + 50*C) it is recommended to utilize the climate protection
SC9901-V which provides additional shading to the reader.
Heater Thermostat controlled embedded heater.
Operating humidity 0 – 95% RHNC
(Relative Humidity No Condensation)
Ingress Protection
Classification IP 65
Housing dimension L=109mm, H=25mm, W=79mm
Configuration Methods Configuration card, reader tool software or factory configured readers.
3
Operating frequency 125kHz & 13,56MHz.
Reading technologies
Electromarine EM4200, HID® Proximity, MIFARE CSN 4 byte,
MIFARE CSN 7 byte, MIFARE Classic, MIFARE Plus, MIFARE DESFire 0.6 and
MIFARE DESFire EV1. Also supports other ISO 14443 A/B* compatible cards.
*Not all ISO14443 B cards have been implemented in the reader, please contact
Nexus for more details on current status. MIFARE is a registered trademark of NXP
B.V. and is used under license.
Secure Access Module
(SAM):
MIFARE SAM AV2, external SIM card
connection slot.
Communication
protocols
Wiegand, Clock/Data, OSDP 1, OSDP 2 (including Secure channel),
RS232 and RS485.
Reading output format 24-1024 (excluding parity bits)
Keypad output format Wiegand 4bit, Wiegand 8bit (Dorado), Wiegand 26bit, OSDP ASCII format.
Keypad
12 digit keypad in 4 rows of 3 keys in each row with configurable
backlight in blue color. Control features On/Off/Auto indicators.
Light itensity can be adjusted.
Indicators LED, Green, Red and Yellow (Bi-color). Backlight in blue color. Buzzer.
Power supply 9 – 30VDC
Current consumption
24VDC idle mode with heater inactive 60 mA**
12VDC, idle mode with heater inactive 90 mA**
**Current consumption differs depending on functionality used
and can also be limited in the reader configuration.
Input/Output 4 input for LED and buzzer and 2 configurable
input/output.
Tamper alarm Built-in mechanical tamperswitch which allows for
indication both break off protection and opening of the reader.
Operating temperature
–40° – +70°C
When installing readers in environments with extreme heat
(above + 50*C) it is recommended to utilize the climate protection
SC9901-V which provides additional shading to the reader.
Heater Thermostat controlled embedded heater.
Operating humidity 0 – 95% RHNC
(Relative Humidity No Condensation)
Ingress Protection
Classification IP 65
Housing dimension L=109mm, H=25mm, W=79mm
Configuration Methods Configuration card, reader tool software or factory configured readers.
Cidron Combi Reader -
Technical specifications
4
1 x
2 x 2 x 2 x 1 x
• 1pc Installation plate
• 1pc Reader module with front plate
• 1pc Front cover
• 2pcs Terminal connector (8-pin)
• 2pcs Installation screws
• 2pcs Screw plugs
• 1pc Cable strip
• 1pc Fixing screw
• 1pc Quick installation guide
Package content:
* Please note that all pictures in this manual are illustrations and do not represent the actual sizes and form of
the components.
5
~20 cm
In order to facilitate installation a cable length of 20cm
is recommended.
6
Ensure that the installation plate is fixed in the correct direction,
i.e. the arrows pointing upwards.
7
Ensure that the area behind the tamper switch bulb of the installation
plate is flat, to be able to push the bulb for correct tamper alarm
functionality. If it is not flat enough, you will find accessories in this
manual that will assist with improving this functionality.
8
When installing directly to wall or door, use the recommended
vertically aligned holes (as picture describes). If using other screws
than the ones supplied with the reader, make sure to use a flat headed
screw with a maximum height of 2.8 mm and a maximum diameter of
7.8 mm on the screw head.
Make sure not to tighten the screws too hard as doing so will deform
and skew the installation plate. This may affect the tamper switch
functionality of the reader. Countersunk screws should never be used.
21 mm
48 mm
69 mm
9
When installing reader on a installation box, use the recommended
horizontally aligned holes (as picture describes). If the tamperswitch
functionality should be used a installation box tamperswitch bracket
must be installed between the reader and the installation box.
Utilize screws supplied with the installation box but make sure to use a
screw and possible also washer with a maximum height of 2.8 mm and
a maximum diameter of 7.8 mm.
Installation box tamperswitch
bracket, part no: SC9189-RF
60 mm
10
P1 - Blue socket
P2 - Black socket
Make sure to place the terminal connectors with the fastening
screws facing towards you.
Ce manuel convient aux modèles suivants
1
Table des matières
