NextWave Digital TDR-3100 Manuel utilisateur

3190 Manual Addendum

Video / Audio Setting

Audio Output

You can select Stereo, Left, Right or Mixed Output mode by using the   buttons.

Screen Ratio

You can select TV screen format by using the   buttons. The 4:3 format is the standard

format, the 16:9 for a wide screen TV.

Video Standard

You can select video standard (PAL/NTSC/AUTO) by using the   buttons.

Video Format

You can select video format (RGB/CVBS/YCbCr) by using the   buttons.

Please Note: Use wide button on remote as a hotkey.

Please Note: Use Audio button on remote as a hotkey.

This addendum describes the functionality of the 3190 Digital TV Receiver. The 3190

Nextwave Australian Digital TV Receiver has the added benefit of component out via Scart.

This functionality provided high quality video signals to your Television display.

This addendum makes alterations to the Video/Audio Settings of the system menu and pro-

vides an additional installation diagram for connecting to a TV via component out.

3190 Manual Addendum

Connecting to a TV using Component (Y,Cb,Cr) output

1. Connect the coaxial cable from the Antenna to the ANT IN socket on the rear panel of the STB.

2. Connect a SCART to Component (Purchased separately) cable to the SCART TV socket on the STB

and the Component IN (Y,Cb,Cr) socket on your TV.

3. Component output needs to be activated via the Video Configuration menu. See page 21 for details.

4. Depending on your audio needs, link audio output from any one of the three types of audio connections.

Operating Instructions

TDR-3100

Australian Digital TV Receiver

Please read the following safety instructions carefully.

♦Do not overload wall outlets, extension cords or integral convenience receptacles as this can

result in a risk of fire or electrical shock.

♦Never allow liquids, spray or other materials to come into contact with the inside of the STB.

♦Unplug the STB from the wall outlet before cleaning.

♦Use a soft cloth to clean the exterior of the STB.

♦Allow clear space around the STB for sufficient ventilation.

♦Do not use the STB where it is exposed to direct sunlight or near a heater.

♦Never stack other electronic equipment on top of the STB.

♦Do not place the STB outdoors. Keep out of direct sunlight.

♦Do not connect or modify cables when the STB is plugged in.

♦Do not cover the STB or place it on a unit that emits heat.

WARNING

RISK ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHO CK, DO NOT

REMOVE COVER(OR BACK). NO USER SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

Th is s ym b o l in d ic a te s

imp o rtan t instru c tio ns

accompanying the product.

This symbol indicates "dangerous

voltage" inside the product that

presents a risk of electric shock or

personal injury. !

Safety Instructions

Quick Start Guide...........................................................................................................2

Safety Instructions............................................. ...........................................................4

Remote Control..............................................................................................................5

Front Panel / Rear Panel................................................................................................6

Installation......................................................................................................................7

Getting Started.............................................................................................................10

User Functions.............................................................................................................13

Teletext..................................................................................................................13

Program Guide......................................................................................................14

Main Menu....................................................................................................................15

Language...............................................................................................................15

Configuration........................................................................................................16

Time Settings........................................................................................................17

Edit Channels........................................................................................................19

Channel Search....................................................................................................22

Change Password................................................................................................24

Parental Control....................................................................................................24

Games....................................................................................................................24

Information............................................................................................................24

Trouble-shooting.............................................................................................................25

Specifications..............................................................................................................26

Warranty Form.............................................................................................................27

Contents

Connect your antenna to the AERIAL input socket.

Connect Video and Audio lead between STB and VCR or TV.

- Connect video (yellow) plugs of supplied lead to VIDEO

OUT of STB to VIDEO IN of your TV or VCR.

- Connect audio (white & red) plugs into the AUDIO L-R

sockets on the STB and to AUDIO IN (L-R) of the VCR or

TV.

For other connection options see pages 7-9, or visit www.nextwave-digital.com

Turn on STB.

- Power up STB at mains switch behind the decoder.

- Press STANDBY button on Remote Control Unit (RCU)

or the front panel button.

At Start-up menu, select QUICK SCAN using 



button.

Press OK.

The STB will have no channels activated when first installed.

The ‘Quick Scan’ (F1)function is the fastest method of finding all

of the digital channels broadcasting in your region. If you are in

a region where all networks are not yet broadcasting, Quick

Scan is an easy method of checking for new channels.

Step. 2

Step. 1

Step. 4

Step. 3

Quick-Start Guide

If you wish to operate the NextWave Australian Digital TV ‘Set Top Box’ (STB) before

reading the rest of this manual, please complete the following steps.

At the Search Programs menu (see page 23), search ALL

channels on AUTO. Press OK.

- From the Search Programs menu, press OK on Search: AUTO.

This will activate a complete channel search. None of the

digital channel frequencies or parameters need to be

known. All available channels will be accessible within 90

seconds. (If you are sure that all available channels have

already been recognised, you may exit the scan early by

pressing EXIT followed by OK on the RCU.)

The F1 key will invoke the Quick Scan function at any time. This is particularly useful if

you take your digital receiver to other regions in Australia where the digital channel plan

is different from your own.

Quick scan will be useful when new digital services, e.g. new channels, ‘datacasting’ or

other kinds of digital TV services, become available.

Press EXIT followed by OK to view TV channels.

- Exit from the Channel Scan menu by pressing EXIT,

followed by OK to save the current channel plan.

- Change channels with the CH + / - or  keys. Adjust the

aspect ratio to suit your TV using the WIDE button.

Step. 6

Step. 5

Finish !

The rest of the manual contains detailed instructions for installing and working with

your new digital set top box.

Front Panel & Features

Features

Front Panel

.edomnoitarepO/ybdnatSehttceleS

yalpsiDtigiD4 .rebmunlennahc)r(oidaRro)t(VTsyalpsiD .edomybdnatsniemitsy

alpsiD

 .nwoDdnapUlennahC

21 3

S-VHS, CVBS & RGB Video

Wide Screen (16:9) Hot-Key

Electronic Program Guide

Software Upgradeable

Signal Indicator Bars

Internet Support Site

Front Panel Display

Simple Setup Key

Dolby Digital

- Connect the coaxial cable from the VHF/UHF Antenna to the AERIAL socket on the

rear panel of the STB.

The NextWave TDR-3100 is a stylish, full featured standard definition digital set top box.

There is no compromise between high quality, extensive features and a competitive

price.

Compact Size

Onscreen Games

Onscreen Teletext

Closed Captioning

Parental Control PIN

Super Fast Channel Scan

Channel Rename Function

Favourite Channels Function

Digital Audio Output (S/PDIF)

Rear Panel

1 2 3 4 5 6

7 8

910

Your NextWave TDR3100 digital TV receiver contains a wealth of connection options. The

following diagram illustrates and describes the connection options on the rear panel.

LAIREAVT .tupnilaireaVT)lanoitnevnoc(lairtserreT

VT .)RCV:ge(secivedrehtootgnideefroftuptuolaireaVT

232SRATAD .troPedargpUerawtfoS

TRACSVT .VTfotupniTRACSottcennoC

TFELOIDUA THGIROIDUA .metsysiF-iHaotnoitcennocroftuptuooeretS

FIDP/S .rossecorPVAottcennoC.tuptuOoiduAFIDP/SlaixaoC

TUOOEDIV .RCV/VTottcennoC.tuptuooediv)etisopmoc(SBVC

SHVS .elbacSHVShtiwRCV/VTottcennoC

hctiwSrewoP .ffo/notinuehthctiwS

DAELREWOP .zH06/05V542-09CA

You can operate every function of the NextWave digital decoder using the buttons on the

remote control handset. Please read this section to help your understanding of each function.

14 15

24 25

20 21

1716

2322

Remote Control

Table des matières

Autres manuels NextWave Digital Récepteur TV

NextWave Digital

NextWave Digital TDR-3200 Manuel utilisateur

NextWave Digital

NextWave Digital THD-6290 Manuel utilisateur

NextWave Digital

NextWave Digital THD-5150 Manuel utilisateur

Manuels Récepteur TV populaires d'autres marques

NEC

NEC PX-TUAN-01 Manuel utilisateur

Edision

Edision Piccollino Manuel utilisateur

Matsui

Matsui DTR1 Manuel utilisateur

Dyon

Dyon Raptor Manuel utilisateur

Strong

Strong SRT 2401 Mode d'emploi

TerraTec

TerraTec CINERGY DT USB XS DIVERSITY Manuel d'instructions

Haier

Haier 34F9K Manuel utilisateur

TechniSat

TechniSat DigiCom 1 Manuel utilisateur

Haier

Haier LT19A1 Manuel utilisateur

Triax

Triax CR 317 Manuel utilisateur

DirecTV

DirecTV D10-300 Manuel utilisateur

Motorola

Motorola VIP2502W Manuel utilisateur

ActionTec

ActionTec WirelessTV Manuel utilisateur

Motorola

Motorola VIP1200 Series Manuel utilisateur

Xoro

Xoro HRT 1300 Manuel utilisateur

Motorola

Motorola DH6200 Manuel utilisateur

Manhattan

Manhattan Plaza DS-100 Manuel utilisateur

Micro Prose

Micro Prose MPI-500 Manuel utilisateur