Newskill ICARUS NS-ICARUS-IC27F6-V2Z Manuel utilisateur
27 INCH FHD RESOLUTION
USER MANUAL
1920×1080@165Hz
FHD RESOLUTION
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States
and other countries.
Los términos HDMI y HDMI High-Definition Multimedia Interface, y el logo de HDMI son
Marcas comerciales o marcas registradas de HDMI Licensing Administrator, Inc. en los Estados
Unidos Estados y otros países.
Les termes HDMI et HDMI High-Definition Multimedia Interface, ainsi que le logo HDMI sont
Marques commerciales ou marques déposées de HDMI Licensing Administrator, Inc. aux États-
Unis États et autres pays.
Die Begriffe HDMI und HDMI High-Definition Multimedia Interface sowie das HDMI-Logo
lauten Marken oder eingetragene Marken von HDMI Licensing Administrator, Inc. in den
Vereinigten Staaten Staaten und andere Länder.
I termini HDMI e HDMI High-Definition Multimedia Interface e il logo HDMI sono Marchi o
marchi registrati di HDMI Licensing Administrator, Inc. negli Stati Uniti Stati e altri paesi.
EN
ES
FR
DE
IT
CONTENTS
27
FHD RESOLUTION 1920×1080@165Hz
ICARUS
USER MANUAL
MANUAL DE USUARIO
MANUEL DE L'UTILISATEUR
BENUTZERHANDBUCH
MANUALE UTENTE
04
16
28
40
52
EN
ES
FR
DE
IT
4
ICARUS SERIES
EN Important Safety Precautions
1. Please read all the instructions carefully before using this product.
2. BE SURE TO unplug the power cord when cleaning LCD. Never clean it with liquid detergent or spraying detergent,
but wipe it with wet soft cloth. If it is still not clean, please use special detergent for LCD.
3. DO NOT use accessories not authorized by the manufacturer, other wise they may incur danger.
4. When disconnecting the power cord of display or power adapter, always remember to hold the plug instead of puling
the wire to unplug the power cord.
5. Keep the display away from water sources such as bath tub, washbasin, sink or washing machine.DO NOT place the
display on wet floor or near a swimming pool, or press LCD surface with fingers or hard objects.
6. The grooves and openings on the back and bottom of the shell are for ventilation purpose and also for guaranteeing
the reliability of the elements and preventing them from overheating; in order to prevent the vents from blocking;
DO NOT place the display on bed, sofa, carpet or other similar surfaces; DO NOT place the display near to or on heat
radiator or heater; DO NOT put the display into embedded device, unless it is provided with adequate ventilating
equipment.
7. Only the type of power source indicated on the nameplate applies to this display. If you have any questions on the
type of power source you use, please consult the dealer of the display or local administration of power supply.
8. For safety, the display or the power adapter is equipped with three-pin plug power cord. The third pin of this plug is
for grounding, and only applicable to socket that is correctly grounded. In case that your socket is not available for
the plug, please contact electrician to replace the socket.
9. Since there is high voltage or other risks when the shell is opened or moved, please DO NOT repair the display by
yourself, but request qualified maintenance staff to carry out.
10. In one of the following cases, please unplug the display or the power adapter and ask qualified maintenance staff
for help:
a. The power cord or the plug is impaired or worn.
b. The display falls off or the shell is damaged.
c. The display is obviously abnormal.
11. Please place the display in a cool, dry and well ventilated place.
12. Store the display in temperature range of -10°C~60°C, beyond which the display may be damaged permanently.
The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to
your home, consult your dealer or local power company.
The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded power
outlet as a safety feature. If your outlet does not accommodate the three-wire plug, have an electrician install the correct outlet, or use an
adapter to ground the appliance safely. Do not defeat the safety purpose of the grounded plug.
Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the monitor from damage due to
power surges.
Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked
between 100-240V AC, Min. 5A.
The wall socket shall be installed near the equipment and shall be easily accessible.
Power & Electrical Warnings
5
ICARUS SERIES
EN
Read the safety instructions carefully and thoroughly.
All cautions and warnings on the device or user’s manual should be noted.
Refer servicing to qualified personnel only.
Keep the User’s Guide that comes with the package for future reference.
To prevent fire or shock hazard, keep this device
away from humidity and high temperature.
The ventilator on the device is used for air convection and to prevent the device
from overheating. Do not cover the ventilator.
Lay this device on a reliable flat surface before
setting it up.
Do not leave the device in an unconditioned environment with a storage
temperature above 60OC or below -20OC, which may damage the device.
NOTE: The maximum operating temperature is around 40OC.
Always keep strong magnetic or electrical objects away from the device.
Make sure that the power voltage is within its safety range and has been adjusted properly to the value of 100~240V
before connecting the device to the power outlet. Do not disable the protective earth pin from the plug. The device must
be connected to an earthed mains socket-outlet. Always disconnect the power cord or switch the wall socket off if the
devicewould be left unused for a certain time to achieve zero energy consumption.
Place the power cord in a way that people are unlikely to step on it. Do not place
anything on the power cord.
When cleaning the device, be sure to remove the power plug. Use a piece of soft
cloth rather than industrial chemical to clean the device. Never pour any liquid
into the opening; that could damage the device or cause electric shock.
If any of the following situations arises, get the device checked by service personnel:
The power cord or plug is damaged.
Liquid has penetrated into the device.
The device has been exposed to moisture.
The device does not work well or you can not get it work according to user’s manual.
The device has dropped and damaged.
The device has obvious sign of breakage
Recommendations:
1. Take a 10-minute break for every 30 minutes of screen time.
2. Children under 2 years of age should have no screen time. For children aged
2 years and over, screen time should be limited to less than one hour per day
Warning!
Overuse of screens is likely to affect eyesight.
6
ICARUS SERIES
EN IMPORTANT SAFETY PRECAUTIONS
Do not expose the monitor to a humid environment, rain or other liquids.
Do not open the monitor housing to avoid any shock due to electrical or mechanical hazards.
Operation
• Keep the monitor out of direct sunlight or other heat sources like stoves.
• Keep the monitor away from any liquid.
• Remove any object that could fall into the ventilation holes.
• Do not block the ventilation holes to avoid overheating.
• Do not knock or drop the monitor.
CAUTION
Unplug the power cable from the outlet before cleaning the monitor.
• To clean your screen, slightly moisten a soft, clean cloth with water.
• Please use a special screen-cleaning tissue if possible.
• Do not use benzene, thinner, ammonia, abrasive cleaners or compressed air.
• Inappropriate cleaning solutions may damage the monitor or leave a milky film on screen or housing.
• Unplug the monitor if you are not going to use it for a longer time period.
• Do not expose the monitor to dust, liquids or a humid environment.
• In case the monitor gets in touch with any liquid, wipe it down immediately using a dry cloth.
• In case any liquid gets spilled into the ventilation holes, do not use the monitor anymore. Please contact a professional service
technician..
27 INCH FHD RESOLUTION
USER MANUAL
1920×1080@165Hz
FHDRESOLUT ION
Monitor x1
VESA
connector up x1 VESA
connector down x1 Adapter x 1 DP Cable x 1 User manual x1
Stand stem x 1 Stand base x 1 Screws x 4
(PM4*16)
Screws x6
(PM4*10)
1. Product Description
Packing list
Please check the following items in the packing case before installation:
If any of above items is missing, please contact with the dealer.
Extra screws may be included as backup.
7
ICARUS SERIES
EN
2. Product Overview
2.1 Monitor Buttons
2.2 Monintor Ports
Connect the signal line to output interfaces signal of DP/HDMI signals of PC, and then connect the other end of
the signal line to the corresponding signal input port of the display.
M Menu Buon Press to display the OSD menu or enter sub-menus.
Down Buon Press to move down in the menus.
Up Buon Press to move up in the menus.
Exit Buon Press to exit.
Power Buon Press to turn the monitor on/o.
LED Indicator Changes colors to indicate status.
Audio Output Insert one end of the Audio cable into the computer’s Audio output to
recevie the Audio signals from your monitor.
HDMI Connectors Insert one end of the HDMI cable into the computer’s HDMI output and
connect the other end to the monitor’s HDMI port.
DP Connectors Insert one end of the DP cable into the computer’s DP output and connect
the other end to the monitor’s DP port.
Power Connector Insert the power cable to supply power to the monitor.
1
8
7
3
5
6
2
9
4
1 2 3 4 5 6
10
8 97 10
8
ICARUS SERIES
EN 3. Stand Installation
Keep the foam underneath the monitor before attaching the stand.
First open the carton, take out the foam
and align it on the desktop, remove the PE
bag, and place the body on the foam. press
the lock down vertically with your hand to
remove the hinge assembly.
Lock the shaft assembly and the
bracket with 2 PM4*10mm screws,
and then lock the 3 PM4*10mm
screws to the base.
As above, vertically push the lock
catch. Put stands assembly parts
into slot of back cover accordingly
and make them mechanically
placed. Hold the middle of stand
and make sure the monitor won’t
drop out.
Make sure the monitor is laid on a flat surface before removing the stand.
1
2
3
9
ICARUS SERIES
EN
This monitor only includes screws which may be used when
attaching the monitor to a VESA 75*75mm type mount.
No VESA mount or mounting accessory is included.
Screw x 4
Mount
(Not included)
Open the package, take out the product with foam still attached, and gently place it on a desktop or
table. Remove the extra parts and the foam covering the back of the monitor. Press the release button to
remove the stand plate.If the monitor was already attached to the stand, remove the stand.
Release button
Stand Plate
Foam
Remove the original screws ( ) from the opening in the back of the monitor.
Then use the 4pcs PM4*16 screws to attach the adapters inside the opening.
• Do not discard the original screws.
• Use only the 4pcs PM4*16 screws ( ) provided.You MUST follow the instructions below for secure installation.
Your monitor is now ready to be attached to a wall-mounting bracket.
To avoid damage, please do not pinch the screen during bracket installation.
4. Wall Mounting
1
2
3
1
2
1
2
10
ICARUS SERIES
EN 5.Basic Operation
1. Insert one end of the DP cable into your PC's graphics card. A HDMI cable may also be used. A HDMI cables is not included.
2. Connect the other end of the cable to the corresponding connector on your monitor.
3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you
use a surge protector with adequate voltage if a wall outlet cannot be reached directly.
4. Press the power button to turn on the monitor.
Solid blue light indicates power is on and the monitor is operating normally. Flashing blue light indicates no video
source ,no horizontal or vertical signal has been detectde or voltage is low. Please ensure your computer is on and all
video cables are fully inserted and/or connected.
DP Connector
HDMI Connector
6. Indicator Lights
Indicator light
Table des matières
Langues :
Autres manuels Newskill Moniteur
Newskill
Newskill ICARUS Series Manuel utilisateur
Newskill
Newskill ICARUS 27 Manuel utilisateur
Newskill
Newskill ICARUS Manuel utilisateur
Newskill
Newskill ICARUS RGB Manuel utilisateur
Newskill
Newskill ICARUS 24 Manuel utilisateur
Newskill
Newskill ICARUS 165Hz-VA-IC27F6-V2P Manuel utilisateur
Newskill
Newskill ICARUS RGB 27 Manuel utilisateur
Newskill
Newskill ICARUS RGB 24.5 Manuel utilisateur
Newskill
Newskill ICARUS Manuel utilisateur
Newskill
Newskill ICARUS Manuel utilisateur
