NewLine PTC Series Manuel d'instructions
Quick Start Manual
Please keep this manual for future reference.
This manual is a general manual, the pictures are for reference only , please refer to
the real product.
The symbol of the crossed out wheeled bin indicates this product
should not be placed in municipal waste. Instead, dispose of waste
equipment by handing it over to a designated collection point for the
recycling of electrical and electronic equipment.
Thank you for choosing Newline unied collaboration touch screen.
1
Symbol Conventions
Symbols are used in this document to indicate operations that need particular attention. The
symbols are dened as follows:
Indicates a hazard with risk that, if not avoided, could result in death or
injury.
Indicates a potentially hazardous situation that, if not avoided, could
result in equipment damage, data loss, performance deterioration, or
unanticipated results.
Provides additional information to supplement operation in the main
text.
WARNING
CAUTION
NOTE
Safety Instruction
For your safety, please read the following instructions before you use the product. Improper
operations may cause severe injury or property damage. Do not try to repair the product on
your own.
If major failures occur, disconnect the product from power source
immediately.
Major failures include the following:
●Smoke, peculiar smell or abnormal sound is discharged from the product.
●No image or sound is displayed, or the image error occurs.
If the above scenarios occur, do not continue using the product. Disconnect
power source immediately and contact professional sta for troubleshooting.
Do not drop liquid, metal or anything combustible into the product.
●If liquid or pieces of metal get into the product, turn off the power and
disconnect the power source, then contact professional sta for solutions.
●Supervise children when they are close to the product.
WARNING
2
Put the product on a stable surface.
An unstable surface includes but is not limited to an inclined surface, a shaky
stand, desk or platform, which might cause turnover and damage.
Do not open the cover or modify the product on your own.
High voltage components are installed in the product. When you open the cover,
high voltage, electric shock, or other dangerous situations may occur.
If inspection, adjustment, or maintenance is required, contact the local distributor
for help.
Use the specied power source voltage.
●
To prevent the product from being damaged, do not use cables other than the
one provided with the product.
●Use a three-wire socket and ensure that it is properly grounded.
●
Pull out the power plug from the socket if the product is not to be used for a
long period.
Regularly clean the dust and metal on the power plug.
● Continued use of this product may cause re or electric shock if the plug is
not clean for a long time.
●Pull out the power plug before cleaning it with a dried cloth.
Do not place items on the top of the product.
● Do not put items, such as a liquid container (a vase, owerpot, cosmetics or
liquid medicine) on the top of the product.
● If any water or liquid is spilled on the product, a short circuit may occur and
cause re or electric shock.
●Do not walk on or hang any items on the product.
Do not install the product in an improper place.
● Do not install the product in humid places, such as the bathroom, the shower
room, near windows, or outdoor environments that experience rain, snow or
other harsh weather. Avoid installation near hot spring vapor. The preceding
environments may cause faults in the product or electric shock under extreme
conditions.
● Do not put exposed re source, such as an ignited candle, on the product.
Pull out the power plug during thunderstorms.
● Do not touch the product during a lighting storm to avoid electric shock.
● Install or place components that supply high enough voltage out of the reach
of children.
WARNING
3
Do not touch the power cable with wet hands.
Do not install the product in high temperature environments.
●Do not install the product near a heat source, such as a radiator, a heat
reservoir, a stove or other heating products.
●Do not expose the product to direct sunlight, which may cause high
temperatures and subsequent faults in the product.
Transport of the product.
●Pack the product for transport or maintenance by using the cartons and
cushioning material provided with the product.
●Keep the product vertical during transport. The screen or other components
are easily broken if the product is moved inappropriately.
●
Before you move the product, disconnect all external connections and separate
all toppling preventing products. Move the product carefully to prevent it from
being hit or squeezed, especially the screen, which may cause injury if broken.
Do not cover or block up any vents on the product.
● Any overheated components may cause re, damage the product, and shorten
the service life.
●Do not lay the product down where the venting surface will be covered.
●Do not install the product on a carpet or cloth.
●Do not use a cloth such as table cloth to cover the product.
Keep away from the product when you use a radio.
The product complies with the international EMI standard regarding prevention of
radio interference. However, interference may still exist and cause noises to the
radio. If noise occurs in the radio, try the following solutions.
●
Adjust the direction of the radio antenna to avoid the interference from the product.
● Keep the radio away from the product.
Do not damage the power cable.
● Do not damage, change, twist, bend, or forcibly drag the power cable.
●Do not put weights (such as the product itself) on the power cable.
●Do not forcibly drag the cable when you pull out the power plug. If the power
cable is damaged, please contact the local distributor to repair or replace it.
●The power cable in the accessory box is for this product only.
WARNING
CAUTION
4
●Do not use it on other products.
Correct battery usage.
● Galvanic corrosion, electric leakage, and even re may be caused by improper
battery usage.
●It is recommended to use the designated type of battery and install the battery
by correct electrodes (positive and negative).
●Do not use a new battery alongside a used one.
●Take out the batteries if the remote control is not to be used for a long period.
●Do not expose the batteries to overheated environments such as sunlight and
ring.
●Dispose of used batteries based on your local regulations.
Suggestions for usage:
● Use the product in an environment with comfortable lighting. It is harmful to
your eyes to watch in a too bright or too dark environment.
● Rest your eyes after an extended period of usage.
● Keep sucient distance from the product to protect your eyes and prevent
eyestrain.
● Adjust the volume to an appropriate level, especially at night.
● Use amplier equipment as the audio input source with caution. If you must
use amplier equipment, the input power should not exceed the maximum
of speaker power. Otherwise, the speaker can become overpowered and
damaged.
Special note:
● Zero energy consumption can be achieved when the product isn’t connected to
any external power source. Therefore, it is recommended to shut down the device
when not watching.
●Under the premise of ensuring the display quality, the energy consumption
can be reduced by reducing the brightness of the display.
●This product can be paired with various built-in computers, which can be
upgraded or replaced according to your needs.
CAUTION
5
AProduct Overview
Appearance
◆Front View
The plastic parts at the bottom of the tablet are fragile. To avoid damage to the plastic parts,
please pay attention to the following:
●Do not strike the plastic parts at the bottom of the tablet.
●Do not place heavy objects on the plastic parts of the tablet.
●Do not let the plastic parts on the bottom of the tablet touch the ground.
●Avoid bumping the plastic parts at the bottom of the tablet.
CAUTION
TT-6519PTC/ TT-7519PTC / TT-8619PTC：
12 2
5
3
4
689 19
710
6
◆Rear View
TT-6519PTC/ TT-7519PTC / TT-8619PTC：
1
2
3
4
5
6
SoundBar Camera
SoundBar Speaker
Touch Frame (within the prole cavity)
LCD Panel & Tempered Glass
Power Button
IR Receiver
7
8
9
10
Light sensor
Microphone
Camera
Camera Indicator
11 SoundBar Connector
12 Built-in Computer Port
13 Rear Ports
14 Rear Ports
15 Rocker Switch
16 Power Socket
17 SoundBar Rear Ports
18 SoundBar Top Buttons
19 Bottom Plastic Part (fragile)
The angle of the SoundBar camera can be adjusted downward by manually pressing the bottom frame of
the camera. The maximum range of adjustment is 20° downwards.
NOTE
17 18
11
12
13
14
15
16
7
◆Front Buttons
Button Function description
Power on/o.
If the power is on, short press it to enter sleep mode, press
and hold for 2 seconds to shut down.
If the power is o, short press it to turn on the power.
Front Control Panel
Rear Ports
Output: 5V/ 2A (Max.). For qualied device use only otherwise may cause electrical shock or
re.
CAUTION
Ce manuel convient aux modèles suivants
3
Table des matières
Autres manuels NewLine Moniteur
NewLine
NewLine Q+ Series Manuel utilisateur
NewLine
NewLine rs+ Series Manuel utilisateur
NewLine
NewLine RS Series Manuel utilisateur
NewLine
NewLine IB SERIES Manuel utilisateur
NewLine
NewLine Lyra Pro Q Series Manuel utilisateur
NewLine
NewLine Q Series Manuel utilisateur
NewLine
NewLine TRUTOUCH VN Series Manuel utilisateur
NewLine
NewLine TT-6519RSC Manuel utilisateur
NewLine
NewLine RS Plus Series Manuel d'instructions
NewLine
NewLine TT-6519PTC Manuel utilisateur
NewLine
NewLine TRUTOUCH VN Series Manuel utilisateur
NewLine
NewLine NT Series Manuel d'instructions
NewLine
NewLine VN Series Manuel utilisateur
NewLine
NewLine FLEX Manuel utilisateur
NewLine
NewLine TT 19NT Series Manuel utilisateur
NewLine
NewLine Q Series Manuel utilisateur
NewLine
NewLine rs+ Manuel utilisateur
NewLine
NewLine LED 75 Manuel utilisateur
NewLine
NewLine TT-6519VNC Manuel utilisateur
NewLine
NewLine TRUTOUCH RS Series Manuel utilisateur
