PowerSwap Nucleus MINI System Owner's Manual | 3
Storage and Disposal
Operating Guidelines
Storage and Disposal
Storage Instructions:
• DO NOT SHORT TERMINALS.
• This battery should be stored in a cool, dry, and well-ventilated area. Sustained elevated tempera-
tures are the primary reason for premature failure of batteries. Charge batteries at room tempera-
ture. In warm climates, keep chargers in air conditioned rooms for best performance.
• Although our batteries have good self-discharge characteristics, batteries should be stored for long
term storage in a fully charged condition.
• It is always a good idea to submit the battery to a discharge/charge cycle from time to time during
storage.
• Do not store batteries in temperatures above 140oF/60oC or below -40oF/-20oC. Do not store in
direct sunlight or near heating equipment.
Disposal Instructions:
• DO NOT INCINERATE. DO NOT DISASSEMBLE.
• Disposal must be in compliance with applicable regulations which vary depending on national, state/
provincial and local basis. This battery contains recyclable materials so recycling is strongly recom-
mended.
PowerDock MINI Operating Instructions
Step 2: Place fully charged batter-
ies in PowerDock MINI Station. Make
sure battery is fully engaged and
the LED lights on the battery are lit.
*Batteries should be inserted firmly,
but never slammed into place.
Step 3: Turn PowerDock MINI
Station on (-) (switch located
as shown). LED should light
green.
When unit is not in use, turn the PowerDock MINI OFF. Batteries will continue to drain if unit is left on.
Tip: Monitor battery status with the LED meter on battery. When batteries become low, alarm will sound
and battery should be swapped with a fully charged one.
Step 1: Confirm your device(s) is
plugged into the AC outlet(s).
