Neverlate NL7DAC-PO Manuel utilisateur

NeverlateTM 7-day Alarm ClockTM

Model No. NL7DAC-PO, Instructions for Use

Visit American Innovative™ on the web at www.americaninnovative.com.

Neverlate

day Alarm Clock

day Alarm Clockday Alarm Clock

day Alarm Clock

IMPORTANT SAFEGUARDS,

PLEASE READ FIRST!

CAUTION: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN

EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY

INSERTED TO PREVENT BLADE EXPOSURE.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO PREVENT ELECTRICAL SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS

LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU’AU FOND

This symbol is intended to

alert the user to the presence

of uninsulated “dangerous

voltage” within the product’s

enclosure that may be of

sufficient magnitude to

constitute a risk of electric

shock to persons.

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK).

THERE ARE NO USER-SERVICEABLE PARTS

INSIDE. PLEASE REFER ANY SERVICING TO

QUALIFIED SERVICE PERSONNEL.

AVERTISSEMENT: RISQUE DE CHOC

ÉLECTRIQUE – NE PAS OUVRIR

This symbol is intended to

alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the appliance.

SAFETY CERTIFICATIONS

This product, the Neverlate™ 7-day Alarm Clock™ model NL7DAC-PO,

is listed by CSA International as certified.

Page 3

Printed in China.

Patent Pending.

IMPORTANT SAFETY INSTRUCTIONS

For your protection, please read these safety instructions completely before operating this

product. All operating and use instructions should be followed. All warnings printed on the

device and in the operating instructions should be adhered to. Please keep this manual for

future reference.

Water & Moisture

Do not use this device near water. For example, do not use this device near a bathtub, wash

bowl, kitchen sink or laundry tub. Do not use this device in a wet basement, near a swimming

pool or near any other source of water. Do not place water-filled vessels on this device.

Heat & Open Flame

Do not place this device near any heat sources such as radiators, stoves, amplifiers or other

devices that produce heat. Do not place an open flame on or near this device.

Ventilation

The openings in the cabinet of this device are designed to provide necessary ventilation for

the product’s internal components. Ensure that these openings remain free of obstructions.

Do not situate this device on a bed, sofa, rug, or similar surface that may block ventilation

openings.

Power Source

This product should be connected to a power supply only of the type marked on the outside

of the unit. Where the main plug is used as the disconnect device, the disconnect device shall

remain readily operable.

Grounding or Polarization

Precaution should be taken not to defeat the safety purpose of grounding or polarization.

This product is equipped with a polarized AC power cord plug (one blade is wider than the

other). This plug is designed to fit into the power outlet in only one way. If you are unable to

fully insert the plug into the power outlet, try reversing it. If the plug should still fail to fit, use

a different outlet or contact a certified electrician to have a suitable outlet installed.

Overloading

Do not overload wall outlets, extension cords, etc. beyond their rated capacity.

When Not In Use

Unplug the unit from the wall when not using for prolonged periods of time. When removing

the power cord from the wall, always grasp the plug; do not pull the cord itself.

Power Cord Protection

Power cords should be routed so that they are not likely to be walked on or pinched by items

placed on or against them.

Page 4

Printed in China.

Patent Pending.

Lightning

If the unit is not plugged into an appropriately rated surge protector, unplug the unit from the

wall in the event of a lightening storm in order to protect it from powerline surges.

Object & Liquid Entry

Never insert objects of any kind into this product, through ventilation openings, as these

objects may touch dangerous voltage points or create a short circuit that could result in a fire

or electric shock. Avoid spilling liquid of any kind on or into the device.

Cleaning

Unplug the unit from the wall before cleaning. Use a soft, damp cloth to wipe down the unit.

Do not use liquid or abrasive cleaners.

Servicing & Safety Checks

Do not attempt to service the unit yourself. All servicing should be referred to qualified

personnel. Servicing is required when the unit does not operate properly or has been

damaged in any way, including but not limited to power supply/cord damage, damage as a

result of exposure to moisture, and damage resulting from impact. Upon completion of any

service or repairs to this product, ask the service technician to perform routine safety checks.

Damage Requiring Service

This product should be fixed by qualified service personnel under the following conditions:

1. When the power-supply cord or plug has been damaged.

2. If liquid has been spilled, or objects have fallen into the unit.

3. If the unit is exposed to rain or water.

4. If the product does not operate normally when following the operating instructions.

5. If the unit has been dropped or damaged in any way.

6. When the product exhibits a distinct change in performance.

Replacement Parts

In the event that replacement parts are required, ensure that the service technician uses parts

specified by the manufacturer or those deemed to be equivalent.

SERVICE CONTACT INFORMATION

Please check http://www.americaninnovative.com/service/ for the most up-to-date contact

information and for details regarding product servicing and/or warranty claims.

American Innovative, LLC

attn: Warranty Service

364 Boylston Street, 3rd Floor

Boston, MA 02116

United States of America

p. 617.395.7831 or 866.663.2393 (in the USA)

f. 866.515.7511

e. service@americaninnovative.com

Page 5

Printed in China.

Patent Pending.

FCC INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to the equipment that are not expressly approved by

the responsible party for compliance could void the user’s authority to operate the equipment.

Page 6

Printed in China.

Patent Pending.

INSTRUCTIONS FOR USE

Nested Rotary Control

Note: Rotating the VALUE collar more

quickly changes parameters in units of ten

(10) minutes.

Congratulations!

Thank you for your purchase of the NeverlateTM 7-day Alarm ClockTM, the first and only alarm

clock of its kind. Seven independent daily alarms accommodate your weekly schedule.

Despite its enhanced functionality over and above ordinary clock radio products, the

NeverlateTM was designed with ease of use in mind. American Innovative’s™ patent pending

nested rotary control makes setting the Neverlate™ quick and easy.

Product Registration (http://www.americaninnovative.com/register/)

Please take a moment to register your product online at the URL above. Product registration

is quick and easy and will facilitate future communications with American Innovative™.

Page 7

Printed in China.

Patent Pending.

Setup

The first time you plug in your NeverlateTM product, you need to run through the setup

procedure in order to set the time and other personal preferences.

Press and hold the SETUP key for two (2) seconds to initiate the setup sequence. Press the

SETUP key between steps and to complete the procedure. Use the VALUE collar to adjust the

various settings (including “Set Day of Week”).

Set Time Set Day of Week

(M - Su)

Set Snooze

Duration

(1 - 30 min.)

Set Wake

Preference

(Radio / uzzer)

egin Setup

(press and hold

for 2 sec.)

End Setup

Battery Backup

Your Neverlate™ product takes two AAA batteries used to retain its memory. In the event of

a power outage, the Neverlate™ display will not be visible, but the time, alarm and other

preferences will be retained until the power is restored. This feature is also convenient should

you want to move your Neverlate™ from one place to another.

Setting Alarms

To set the weekly alarms:

1. Position the MODE dial to the day of the week you would like to set. The display

indicates the currently set time and whether or not that alarm is set to sound (vertical

bars surround day indicator) or not (no vertical bars):

2. Use the VALUE control to set the desired wake time. The current alarm is automatically

activated if a change is made to the wake time.

3. Use the ON / OFF key to toggle the active state of the alarm.

4. Repeat the procedure for all seven alarms.

5. Return the mode dial to RUN (alarms sound as set) or ALL OFF (no alarms sound). The

ALL OFF position is useful in the event that you are leaving for an extended period of

time.

Page 8

Printed in China.

Patent Pending.

Alarm Review

To review the next upcoming alarm, tap the SNOOZE key. The display indicates all alarms

that are active. The very next upcoming alarm time is displayed and the icon corresponding to

that day flashes.

Snoozing and/or Silencing a Sounding Alarm

To silence a sounding alarm either:

A. Tap the SNOOZE key to snooze. The NeverlateTM goes silent and sounds again after x

minutes (where xis the preferred snooze duration that you selected during setup). The

number of snooze minutes remaining counts down in the sub-display.

Note: Whenever the Neverlate™ is snoozing, the number of snooze minutes remaining

may be incremented in multiples of xby pressing the SNOOZE key again.

B. Tap the ON / OFF key to permanently silence the alarm. The NeverlateTM is now

automatically ready to sound on the next active day.

Using the Nap Timer

The nap timer enables you to take a power nap for a preset period of time without having to

disrupt your weekly alarm settings. To use the nap timer:

1. Tap the NAP key. If the radio is on, it turns off automatically.

2. The nap icon blinks for five (5) seconds during which time you can use the VALUE collar

to change the desired nap duration (1 to 120 minutes).

3. After five seconds (or if you tap the NAP key a second time), the nap timer is set.

4. The nap timer counts down in the sub-display. When it reaches zero (0), the nap timer

sounds.

The NeverlateTM remembers the last nap duration you entered for the next time.

Using the Sleep Timer

The sleep timer works exactly the same way as the nap timer except that after the desired

duration, the radio turns off automatically. This is useful in the event that you tend to fall

asleep at night with the radio on.

Page 9

Printed in China.

Patent Pending.

Using the Radio

The Neverlate™ contains a high-quality FM/AM analog tuner. Turn the radio on or off using

the ON / OFF key. Use the controls on the front of unit to adjust frequency and volume. Note

that the radio can not be toggled on or off while the clock is in one of the daily alarm set

modes.

Note: The FM antenna for your Neverlate™ product is integrated into the power cord. In the

event that you are having trouble receiving FM broadcasts, try reorienting the position of the

cord.

Page 10

Printed in China.

Patent Pending.

ABOUT AMERICAN INNOVATIVE™

American Innovative™ was founded to pursue the development of innovative new products

that should exist, but don't. "Products that make sense™" is our motto and the execution of

this philosophy can be seen throughout the company's product line. Careful attention to the

needs of the user and a keen eye for industrial design and user interface engineering are the

secrets of American Innovative's success. To learn more about American Innovative™ please

visit us on the web at www.americaninnovative.com.

NEW PRODUCTS

American Innovative™ is proud to introduce the new Chef’s Quad-Timer series of kitchen

multi-timers. To learn more, please visit our website at www.americaninnovative.com.

•Contemporary

styling

•Four 24-hour

Timers

•Easy-to-Hear

Buzzers

•Easy-Set Design

•Batch & Count-Up

Features

•Clock

•Two AAA Batteries

Included

Table des matières

Manuels Réveil populaires d'autres marques

Steren

Steren CLK-210 Manuel utilisateur

COP-USA

COP-USA ALCDVR32-SL Manuel utilisateur

Philips

Philips HF3505/70 Manuel technique

Casio

Casio PQ-70 Manuel utilisateur

iHome

iHome IA63 Manuel utilisateur

Coopers

Coopers 9765 Manuel utilisateur

ANJANK

ANJANK AC-190 Mode d’emploi

TFA

TFA 98.1075 Manuel utilisateur

Sharper Image

Sharper Image 204050 Manuel utilisateur

Lumie

Lumie Zest Manuel utilisateur

Dexford

Dexford RCT200 Manuel utilisateur

Philips

Philips AJL303/37B Manuel utilisateur

RST

RST Q754 Manuel utilisateur

iHome

iHome iKT50 Manuel utilisateur

Sony

Sony dash HID-B7 Manuel utilisateur

SVINZ

SVINZ SCC009 Manuel utilisateur

Clas Ohlson

Clas Ohlson 918863 Manuel utilisateur

IKEA

IKEA FNURRA Manuel utilisateur