
DREi Micro
A brief description
In the first place we are proud that NEUTRAL AUDIO has formed a part of your highly valued musical system.
With this DREi DeIntermodulator, Stereo and Analogue, we have taken a important step forward in the audio
industry. D.R.E.i. stands for Dynamic Reduction of Electronic Interactions and is the essence of this device.
This new and essential product is designed to increase the listening quality of your system audio to levels
well beyond currently normal. Our sound will give you many more hours of warm, friendly enjoyment. If the rest of
your audio system is at an appropriate level, we are convinced that it will sound more neutral, transparent,
detailed, warm and musical than you could ever have imagined.
A preamplifier is the element in the music reproduction system that lets you select the source you want to hear, to
change its output level or volume and connect to the associated amplification. NEUTRAL AUDIO is aware that this
is the step where the musical signal deteriorates mostly due to the extremely low levels with which they work and
the electrical problems inherent in this and therefore should be chosen with great care as overall outcome of the
entire system depends on it. For this reason we developed the Multi Pre amplification technology, which with
several preamps modules in parallel per channel commanded by the DREi module the problems we have talked
about are greatly reduced obtaining a pure sound you will never have heard before. There are several NEUTRAL
AUDIO Multi-preamp models with DREi tech. and they are undoubtedly the best choice if you want to have the
best sound possible, as they have been designed from scratch to eliminate any electronic interaction in the sound
signal.
The DREi Micro is not a preamp. It is designed for those cases in which there may not be a need or desire to
replace the existing preamplifier but where there is a desire to include the DREi technology in the final sound. To
do this it is necessary to insert this external module before the amplifier.
Internally it uses a simplified Multi-preamp technology , using 6 high-precision buffers operating in parallel with no
gain or volume control and controlled by the incorporated module chip "DREi All Inside" with the objective to
neutralize intermodulation, correcting errors in the electronics and increasing the overall performance of the
amplification, filters and speakers. An external SYNERGY control over these buffers provides a new
experience to system optimization in a way that has not heard before.