Neurona AX821 Manuel utilisateur

20130512 V1.

Table of Content

1.IMPORTANT INFORMATION...........................................................................................1

1.1. IMPORTANT SAFETY NOTES...........................................................................................1

2.INTRODUCTION...............................................................................................................2

2.1. PACKAGE CONTENT......................................................................................................2

2.2. PRODUCT OVERVIEW....................................................................................................3

2.3. BUTTONS AND LEDS....................................................................................................4

3.HARDWARE INSTALLATION ..........................................................................................5

3.1. APPLICATION 1–ESTABLISH HY-FI NETWORK................................................................5

3.2. APPLICATION 2–EXPAND WI-FI NETWORK ....................................................................6

4.ENCRYPTED PLC NETWORK.........................................................................................6

4.1. CREATE AN ENCRYPTED PLC NETWORK GROUP ............................................................6

4.2. REMOVE DEVICE FROM AN EXISTING NETWORK GROUP ..................................................7

4.3. CREATE ADDITIONAL ENCRYPTED NETWORK..................................................................8

5.ADVANCED WI-FI SETTINGS VIA WEB BROWSER......................................................9

5.1. GETTING STARTED .......................................................................................................9

5.2. LOGIN TO SETTING PAGE ............................................................................................11

5.3. HOME........................................................................................................................12

5.4. HY-FI NETWORKING SETTINGS ....................................................................................15

5.5. INTERNET SETTINGS ...................................................................................................20

5.6. WIRELESS SETTINGS ..................................................................................................21

5.7. ADMINISTRATION ........................................................................................................30

5.8. CHANNEL NUMBER.....................................................................................................33

6.ENHANCE PLC PERFORMANCE .................................................................................35

7.SPECIFICATIONS ..........................................................................................................37

1.Important Information

Important Safety Notes

The Device is intended for connection to the AC power line. For installation instructions,

refer to the Installation section. The following precautions should be taken when using this

product.

zPlease read all instructions before installing and operating this product.

zPlease keep all instructions for later reference.

zPlease follow all warnings and instructions marked on the product.

zFor safety reason, when device is being powered on, this product should NOT be

installed in any electric socket which makes the surface with venting holes on

the product to face downward (facing the floor).

zUnplug the Powerline device from the wall outlet before cleaning. Use a dry cloth

for cleaning. DO NOT use liquid cleaners or aerosol cleaners.

zDO NOT operates this product near water.

zThis product should never be placed near or over a radiator, or heat register.

zThis product relies on the building’s electrical installation for short-circuit (over current)

protection.

zDO NOT allow anything to rest on the product interconnect plug. DO NOT locates this

product where people may walk on the cords.

zBecause this product sends data over the power line, it is recommended that you plug

directly into a power outlet. Do not plug the Device into a UPS or power strip with surge

protection. The product has its own power filter for protection against surges.

zOnly a qualified technician should service this product. Opening or removing covers

may result in exposure to dangerous voltage points or other risks.

zUnplug the product from the wall outlet and refer the product to qualified service

personnel for the following conditions:

¾When the interconnect cords are damaged or frayed.

¾If liquid has been spilled into the product.

¾If the product has been exposed to rain or water.

¾If the product does not operate normally when the operating instructions are

followed.

¾If the product exhibits a distinct change in performance.

2. Introduction

The Hy-Fi HD Booster is a wireless device with Powerlione Communication (PLC)

technology integrated. It takes advantage of wireless and powerline connections for

providing more flexible and reliable bandwidth. That means it transmits at powerline or

wireless interface, no matter which one your device use, they will automatically connect to

the best available interface for the fast performance.

With Hy-Fi technology comes the intelligent “Path Switch”, it can re-assign traffic to the other

connection if it experiences connection congested, without the user noticing the change has

ever occurred.

This product is suitable for general users to operate in their homes/houses, while advanced

configurations through web-browser described in later chapters are suitable for seasoned

users to change and manage the Hy-Fi HD Booster product settings.

Package Content

Before starting the installation of the device, please make sure the package contains the

following items:

Single pack Dual pack

Device

错误!链接无效。错误!链接无效。

Accessories ¾RJ-45 Cable x 1

¾QIG x 1

¾RJ-45 Cable x 2

¾QIG x 1

Hy-Fi HD Booster Hy-Fi HD Booster

Hy-Fi HD Booster

Product Overview

800Mbps Hy-Fi HD Booster

Buttons and LEDs

LED

ON: Power on and ready.

Blinking: PLC group pairing.

OFF: Power off.

ON: PLC connection detected.

Blinking:

1. Fast:

Powerline data rate > 60Mbps

2. Normal:

60Mbps > Powerline data rate > 10Mbps

3. Slow:

10Mbps > Powerline data rate

OFF: No PLC connection detected.

(They are too far to communicate or it is alone in its logical network).

Steady Green: Wi-Fi network with security protection.

Flash Green: Wi-Fi network traffic in transaction with security protection.

Steady Red: Wi-Fi network without security protection.

Flash Red: Wi-Fi network traffic in transaction without security protection.

Blinking Green (0.5 sec ON / 0.5 sec OFF): WPS negotiation.

OFF：Wi-Fi disabled.

ON: Ethernet connection detected.

Blinking: Network traffic in transaction.

OFF: No Ethernet connection detected.

Buttons

Power Button Push to power on/off the device.

AP Clone by default. The function follows Operation Mode setting in WPS

configuration.

Press 10 seconds:

Randomly generate a new PLC network group name.

Press 1 to 3 seconds:

Start paring with the other PLC device. Paring procedure keeps for 2 minutes or

ends automatically when they are paired. It can be stopped manually by pressing

the button for 1 to 3 seconds again.

Reset Button Press 1 second: Reset to factory default setting.

Press the button when the device is powered (not in standby mode)

3.Hardware Installation

Application 1 – Establish Hy-Fi Network

The Hy-Fi HD Booster takes advantage of wireless and powerline connections for providing

stable and reliable home networking.

To establish Hy-Fi network, user needs at least 2 Hy-Fi HD Boosters. Once Hy-Fi HD

Booster connects with a router, it will automatically turn into Hy-Fi router. Hy-Fi router will

automatically detect and configure other Hy-Fi HD Boosters plugged in around the home on

the network.

Application 2 – Expand Wi-Fi Network

To extend wireless AP coverage in different room or floor, user can place the Hy-Fi HD

Boosters near the mobile devices such as iPad, Tablet, Smartphone and Notebook. The

Hy-Fi HD Booster will turn itself into Hy-Fi extender. User can deploy multiple Hy-Fi

extenders, using a single network name for all devices to eliminate the need to switch from

one to one while moving around the house.

Once your Hy-Fi extenders are connected, any change to the wireless configuration of Hy-Fi

router will automatically be applied to connected Hy-Fi extenders.

4.Encrypted PLC Network

Create an Encrypted PLC Network Group

The Powerline bridges are compliant with HomePlug AV specification. Every ‘HomePlug AV’

compliant PLC device that has the same default network name, “HomePlug AV”, is capable

of communicating with other “HomePlug AV” devices. This is the so called “Public

Network”. Two or more powerline devices under the same network can communicate with

one another.

If you have a pair of powerline device, either one in the pair can be “device A” or “device B”.

By pressing the GROUP button more than 10 seconds; it will generate a random network

group (different from HomePlug AV). Users can take the following two steps to change the

public network group to the private network group to protect their data while transmitting

over the powerline. Users also can create more than one private network groups by

pressing GROUP button directly without software installation required.

*NOTE: Put the Devices side by side will be more convenient during the setting procedure.After network group

is set, the Devices can be deployed anywhere at home.

Step I: Clear Group Attribute

Clear the original network group of device B by pressing its GROUP button more than 10

seconds until all LED lights simultaneously turns off and on once. At this moment, its

network group name has been changed to a random name. It means that this device is (1)

ready to be assigned another network name or (2) to be used as a seed device so

other PLC devices can join to a private network group.

Step II: Join to Other Network Group

1. Press GROUP button of device A for 2 to 3 seconds (make sure POWER LED starts

blinking).

2. Press GROUP button of device B for 2 to 3 seconds (make sure POWER LED starts

blinking).

The Device B which has cleared its group attribute will join to the Device A which has not.

This step makes device Aand B are under the same encrypted network. Additional device C

can be added into device A’s logical network by taking same steps, thus all of the Device A,

B, and C in the same encrypted network group. User can assign as many powerline devices

into the logical network group as described in the SPECIFICATION section.

*NOTE: It does not matter which device’s button is pressed first, but please press the second device’s

GROUP button within two minutes after pressing first device’s GROUP button. After 10 seconds, device will

start communicating with deviceA.

Remove Device from an Existing Network Group

If you would like to remove powerline device from an existing network group, you can

generate a new group name (referring to Step I) to stop communication with an existing

network group.

Create Additional Encrypted Network

If you want to create additional private network for your powerline devices that co-existence

with your existing powerline private network group, please repeat the Step 1 & 2 to generate

new private network group for selected powerline devices.

P.S. Users can press the RESET button to reset the network name back to its factory default.

Autres manuels pour AX821

Table des matières

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur