NeuLog NUL-216 Manuel utilisateur

NEULOG'SPIROMETER'LOGGER'SENSOR'GUIDE'

NeuLog spirometer logger sensor NUL-216

Part# NL-2160

The NeuLog spirometer sensor can be used for any science

experiment which is based on lung capacity such as in the fields of

Psychology, Biology, Exercise Science, etc.

The sensor comes pre-calibrated so you can start experimentation

right out of the box using this guide.

Among hundreds of possible experimental subjects that can be

studied with the NUL-216 sensor are: lung function, lung physiology,

exercise experiments, gas flow rates and gas flow laws, and many

more.

The spirometer sensor's measurement unit is:

Liters per second (L/s): The volume of gas which passes through the

sensor tube per second.

Reset to zero:

Even though the NeuLog spirometer sensor does not need to be

calibrated prior to each use, it is recommended to reset its probe.

To zero the sensor:

1. Connect the spirometer sensor to a voltage source (USB-200 or

BAT-200 module).

2. Press and hold the spirometer sensor’s push button for 3

seconds. You should see a zero reading on the sensor's module

box.

Using the spirometer sensor:

The NeuLog spirometer sensor comes with laminated paper for use.

Prior to experimentation, roll a single piece of laminated paper into a

tube and then place it inside the side with the wider internal opening

of the sensor. The paper should stick out from the metal sensor tube

about one inch. Blowing into the paper instead of directly into the

metal tube is more hygienic for later uses of the sensor.

Using the software’s “area” function, you can determine the total

volume of your lungs easily.

NEULOG'SPIROMETER'LOGGER'SENSOR'GUIDE'

Included with the sensor:

§NeuLog General Guide

§One package of laminated paper for testing.

Sensor's specifications

Range and operation

modes

±10 L/s

ADC resolution

15 bit

Resolution

0.2 L/s

Max sample rate

(S/sec)

100

Experiment Duration: 1 second to 31 days.

Sensor's features:

•Fully digital data

•Rugged plastic ergonomic case

•Push button switch for Start/Stop experiments in off line mode

•LED indicator of experiment status (blinks while collecting data)

•Pre-calibrated sensing equipment

•Metal sensor tube attached by means of 2 durable rubber-coated

wires

•Two pressure sensors connected to the metal tube to accurately

determine airflow speed

Note: NeuLog products are intended for educational use.

Videos and experiment examples:

•Videos, literature and other probes can be found at

www.NeuLog.com.

•In order to access the spirometer sensor's page, choose

"Products" on the main menu and then "Spirometer logger

sensor".

•In order to access the spirometer sensor's experiments, choose

"Example Labs":

oThe Lungs and Spirometry Parameters (B-41)

Technical background:

The philosophy behind NeuLog’s plug and play technology is based

on each sensor’s ability to store its own data due to an internal flash

memory chip and micro-controller in each plastic NeuLog body. This

technology allows the sensor to collect and then store the digital data

in the correct scientific units (oC, oF, Lux, %, ppm, for example).

The sensor is pre-calibrated at the factory. The built-in software in

the logger can be upgraded for free at any time using the provided

firmware update.

Inside the NeuLog spirometer sensor’s metal tube attachment there

is a funnel which creates a difference of air pressures before and

after the funneling piece according to the airflow speed. A pressure

differential sensor is connected to both sides of the funneling piece.

The sensor's controller calculates accurately the air flow speed

according to this pressure difference.

NEULOG'SPIROMETER'LOGGER'SENSOR'GUIDE'

Using the NeuLog software, you can easily determine the area under

or above the curve with the integral function to calculate lung

volumes and capacities.

Maintenance and storage:

•Never submerge the NeuLog plastic body in any liquid.

•Do not allow liquid into the spirometer sensor’s body.

•After use, gently wipe away any foreign material from the

spirometer sensor.

•Store in a box at room temperature out of direct sunlight.

Warranty:

We promise to deliver our sensor free of defects in materials and

workmanship. The warranty is for a period of 3 years from the date of

purchase and does not cover damage of the product caused by

improper use, abuse, or incorrect storage. Sensors with a shelf life

such as ion selective probes have a warranty of 1 year. Should you

need to act upon the warranty, please contact your distributor. Your

sensor will be repaired or replaced.

Thank you for using NeuLog!

Distributed by:

W: www.arborsci.com

E: mail@arborsci.com

P: 1.800.367.6695

Ce manuel convient aux modèles suivants

Autres manuels NeuLog Accessoires

NeuLog

NeuLog NUL-213 Manuel utilisateur

NeuLog

NeuLog NUL-245 Manuel utilisateur

NeuLog

NeuLog NUL-209 Manuel utilisateur

NeuLog

NeuLog NUL-227 Manuel utilisateur

NeuLog

NeuLog NUL-220 Manuel utilisateur

NeuLog

NeuLog NUL-219 Manuel utilisateur

NeuLog

NeuLog NUL-225 Manuel utilisateur

NeuLog

NeuLog NUL-246 Manuel utilisateur

NeuLog

NeuLog NUL-211 Manuel utilisateur

NeuLog

NeuLog NUL-216 Manuel utilisateur

NeuLog

NeuLog NUL-232 Manuel utilisateur

NeuLog

NeuLog NUL-206 Manuel utilisateur

NeuLog

NeuLog NUL-236 Manuel utilisateur

NeuLog

NeuLog NUL-221 Manuel utilisateur

NeuLog

NeuLog NUL-227 Manuel utilisateur

NeuLog

NeuLog NUL-245 Manuel utilisateur

NeuLog

NeuLog NUL-228 Manuel utilisateur

NeuLog

NeuLog NUL-231 Manuel utilisateur

NeuLog

NeuLog NUL-207 Manuel utilisateur

NeuLog

NeuLog NUL-229 Manuel utilisateur

NeuLog

NeuLog NUL-231 Manuel utilisateur

NeuLog

NeuLog NUL-214 Manuel utilisateur

NeuLog

NeuLog NUL-218 Manuel utilisateur

NeuLog

NeuLog NUL-233 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur