Networkfleet 5500 Manuel utilisateur
5500 Diagnostic Hardware (Light/Medium/Heavy Duty) | 5200 Non-Diagnostic Hardware (Universal)
www.networkeet.com | Customer Care: 866.227.7323 customercare@networkeet.com
Networkfleet 5000 Product Line
Installation Guide
Table of Contents
Getting Started
Registration form ...............................................................................................................................................3
5000 Product Line
Unit Overview....................................................................................................................................................4
Harness Options for the 5000 Product Line ...............................................................................................5-6
Installation Instructions
Light/Medium Duty OBD-II Harness Installation ....................................................................................7-9
Heavy Duty Harness Installation ..................................................................................................................10
Universal Harness Installation..................................................................................................................11-12
Verifying Successful Installation....................................................................................................................13
Creating Tamper Evidence.............................................................................................................................. 14
Completing Installation...................................................................................................................................15
Securing the Device .........................................................................................................................................16
Optional Accessories
Optional Window-Mount GPS Antenna Installation Instructions ........................................................... 17
Optional Sensor Installation Instructions ...............................................................................................18-20
Optional Garmin® Installation Instructions ................................................................................................ 21
Optional NMEA Feed Installation Instructions........................................................................................... 22
Verifying Successful Installation/LED Behavior....................................................................................23-24
Appendix
Troubleshooting Light Indicators .............................................................................................................25-26
Frequently Asked Questions .......................................................................................................................... 27
Contacting Networkeet.................................................................................................................Back Cover
2
Registration Form
Fill out the enclosed registration form
before completing installation.
Record the following information:
•VehicleIdenticationNumber(VIN)
•LicensePlate•Year•Make
•Model•Unit’sSerialnumber(10digits)
5000915003
Installation Tip: Metal walls and tall buildings may
interfere with the reception from GPS satellites and
the cellular network. Perform installation when the
vehicleisinclearviewofthesky.Conductnal
installationvericationafterthevehiclehasbeen
running outside for 15 minutes.
3
5000 Product Line Unit Overview
ZipTies(X4)
Data Port
Serial Port
LED Indicator Lights
Side of Unit
Sensor Port
Note: All 5500 and 5200 units
are shipped with a knock-out
panel covering the sensor/
serial ports. In order to access
those ports, you must use an
X-ACTOknifetosliceoff2of
the 3 tabs in order to remove
the knock-out panel.
4
Prior to installation, you must select
and order the appropriate harness for
your vehicle type. The Light/Medium
Duty OBD-II Harness and the Heavy
Duty Harnesses are compatible with
both the 5500 and 5200 hardware
devices. Please refer to the list below
to verify harness compatibility for
each of the 5000 series devices:
5500(DiagnosticCapableHardware)
• Light/MediumDutyOBD-IIHarness
• HeavyDutyHarnesses
(6-pin,9-pin,or9-pin“D”)
5200(Non-DiagnosticHardware)
• UniversalHarness
• Light/MediumDutyOBD-IIHarness
• HeavyDutyHarnesses
(6-pin,9-pin,or9-pin“D”)
Harness Options for the 5000 Product Line
HarnessAdaptersfortheLight/MediumDutyOBD-IIHarness(X8)
Core Connector for the
Light/Medium Duty
OBD-IIHarness(X1)
Bypass
Connector
OBD-II Replacement Connector
Harness
Connector
Harness
Connector
Light/Medium Duty OBD-II Harness Universal Harness (5200 Only)
5
Harness Options for the 5000 Product Line
There are 3 different
harness options for Heavy
Duty vehicle installations:
6-pin Harness, 9-pin Harness,
and9-pin“D”Harness.
6-pin Harness 9-pin Harness
Heavy Duty Harnesses
9-pin“D”Harness
6
Select an Adapter that most resembles the shape of the
OBD-II port of the vehicle. Use these guidelines to match
anadaptertothevehicleitismostlikelytot(eachadapter
isstampedwithanumber).
Ford, GM (1), (6), or (8)
Honda, Lexus, Toyota, Chrysler (2)
Toyota*, Chrysler* (2a)
GM, Saturn (3)
Mercedes, BMW (4)
Porsche, Audi, Volkswagen (5)
Volvo (6)
Saab (7)
* For certain Toyota and Chrysler vehicles,
you may need to adjust the #2 adapter by
removing the clips on the top and bottom
of the adapter. To the right is an example
of the adjusted adapter labeled (2a).
(1)
(2)
(3)
(4)
(2a)
(5)
(6)
(7)
(8)
Light/Medium Duty OBD-II Harness Installation
Heavy Duty Harnesses
7
Core Connector Assembly
1. Snap the selected plastic adapter
to the back of the Core Connector.
2. Attach the Core Connector to the
OBD-II Replacement Connector.
Data Port Connection
1. Connect the Harness
Connector to the Data Port. Bypass
Connector
Networkeet Unit
Harness
Connector
Data Port
OBD-II Replacement
Connector
Light/Medium Duty OBD-II Harness Installation
Adapter
Core
Connector
8
Connecting to the OBD-II Port
1.Withthevehicle’sengineOFF,removethevehicle’sOBD-IIport.
•TheOBD-IIConnectormaybehiddenbehindahushpanel.
•Toremovetheconnector,youmayneedtoremovescrewsordepresstheclips.
2.ConnecttheBypassConnectortothevehicle’sOBD-IIportthatwas
previously removed.
3. Attach the Core Connector to the position where the original
OBD-II connector was installed. Secure it with the screws or
clipsremovedfromtheOBD-IIConnector’soriginal
position(ifapplicable).
Light/Medium Duty OBD-II Harness Installation
to vehicle
Networkeet Unit
Dashboard
Core Connector
Bypass Connector
Original OBD-II Port
9
Heavy Duty Harness Installation
Connecting to the Diagnostic Link Connector (DLC) Port
1.Withthevehicle’sengineOFF,unscrewtheDLCportfromitspositionunder
the dashboard*. In most cases, the DLC port is located under the dashboard
on the left side of the steering wheel, facing toward the oorboard.
2. Plug the Bypass Connector of the harness into the DLC port that was
previously removed from the vehicle in step 1. For the 9-pin connector,
turn the rotating cap clockwise to lock into place.
3. Mount the Core Connector of the harness into the place
in which the DLC port originally resided.
*Note: DLC Port Connector may also be located near or
behind the driver seat.
to vehicle
Networkeet Unit
Dashboard
Core Connector
Bypass Connector
Original DLC Port
10
Ce manuel convient aux modèles suivants
1
Table des matières
