Netvox R311K Manuel utilisateur

Model：R311K

Wireless Tilt Sensor

R311K

User Manual

This document contains proprietary technical information which is the property of NETVOX Technology. It shall be maintained

in strict confidence and shall not be disclosed to other parties, in whole or in part, without written permission of NETVOX

Technology. The specifications are subject to change without prior notice.

Table of Content

1. Introduction ............................................................................................. 2

2. Appearance............................................................................................... 2

3. Main Feature............................................................................................ 3

4. Set up Instruction.................................................................................... 3

5. Data Report.............................................................................................. 5

6. Installation................................................................................................ 8

7. Important Maintenance Instruction...................................................... 9

1. Introduction

R311K is a long-distance tilt detection device which is a Class A device based on the LoRaWAN open protocol of Netvox and is

compatible with LoRaWAN protocol. The device is a title detection sensor. When the device is tilted greater than or equal to 45

degrees in any direction, it will send a tipping signal.

LoRa Wireless Technology:

LoRa is a wireless communication technology dedicated to long distance and low power consumption. Compared with other

communication methods, LoRa spread spectrum modulation method greatly increases to expand the communication distance.

Widely used in long-distance, low-data wireless communications. For example, automatic meter reading, building automation

equipment, wireless security systems, industrial monitoring. Main features include small size, low power consumption,

transmission distance, anti-interference ability and so on.

LoRaWAN:

LoRaWAN uses LoRa technology to define end-to-end standard specifications to ensure interoperability between devices and

gateways from different manufacturers.

2. Appearance

Indicator

Function Key

3. Main Feature

2 x 3V CR2450 button batteries

Compatible with LoRaWAN

Detect voltage and tilt status of the device

Easy set up and installation

Protection level IP30

Compatible with LoRaWANTM Class A

Frequency hopping spread spectrum technology

Configurable parameters via third-party software platform, reading data and setting alarms via SMS text and email (optional)

Applicable to the third-party platforms: Actility/ ThingPark/ TTN/ MyDevices/ Cayenne

The product has low power consumption and supports longer battery life.

Note: Battery life is determined by sensor reporting frequency and other variables.

Please refer to web: http://www.netvox.com.tw/electric/electric_calc.html

In this website, users can find battery lifetime for various models at different configurations.

4. Set up Instruction

On/Off

Power on

Insert batteries (user may need a screwdriver to open)

Insert 2 x 3V CR2450 button batteries into the battery slot in the correct direction

and close the back

cover.

Note: Require 2 button batteries to supply power at the same time.

Turn on Press and hold the function key till the green and red indicator flashes once.

Turn off

(Restore to original setting)

Press simultaneously and hold two buttons for 5 seconds, and then the green indicator flashes 20

times and the device will turn off automatically.

Power off Remove Batteries

Note:

1. Remove and reinsert the battery: the device will remember the previous on/off status by default.

2. After insert batteries and press the button at the same time, the device will be in engineering

testing mode.

3. On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor

inductance and other energy storage components.

Network Joining

Never join the network

Turn on the device to search the network to join.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Had joined the network

(Not restore to the original

setting)

Turn on the device to search the previous network to join.

The green indicator stays on for 5 seconds: success

The green indicator remains off: fail

Fail to join the network Suggest to check the device verification information on the gateway or consult your platform server

provider

Function Key

Press and hold for 5 seconds

Restore to the original setting / Turn off

The green indicator flashes 20 times: success

The green indicator remains off: fail

Press once The device is in the network: the green indicator flashes once and sends a report

The device is not in the network: the green indicator remains off

Sleeping Mode

The device is turn on

and join

in the network

Sleeping period: Min Interval.

When the reportchange exceeds the default or the state of the device changes: send a data report

according to Min Interval.

Low Voltage Warning

Low Voltage 2.4V

5. Data Report

After power on, the device will immediately send a version packet report and an attributes report.

The device sends data according to the default configuration before any other configuring.

Default setting:

Report MaxTime：Max Interval ----3600s

Report MinTime：Min Interval ----3600s (Default: Every Min Interval will detect the state of the dry contact one time)

BatteryVoltageChange ---- 0x01(0.1V)

Triggering the tilt detection:

The device adopts 45° tilt detection around the entire circumference. The initial state of the device is vertical placement.

When the tilt angle (any direction) changes more than 45° (45°~180°), an tipping alarm will be issued immediately.

Device Tilt: 1, Device Recovery: 0

Note:

1. The cycle of the device sending the data report is according to the default.

2. The interval between two reports must be the MinTime.

3. R311K defaults Max Interval = 60min, Min Interval = 60min

(If there are special customized shipments, the settings will be changed according to customer’s requirement.)

The device reported data parsing please refer to

Netvox LoraWAN Application Command document and Netvox Lora Command Resolver

http://www.netvox.com.cn:8888/page/index

Data report configuration and sending period are as following：

Min Interval

(Unit: second)

Max Interval

(Unit: second) Reportable Change Current Change ≥

Reportable Change

Current Change ＜

Reportable Change

Any number between

1~65535

Any number between

1~65535 Can not be 0 Report per Min Interval Report per Max Interval

Example of ConfigureCmd

FPort：0x07

Bytes 1 1 Var (Fix =9 Bytes)

CmdID DeviceType NetvoxPayLoadData

CmdID– 1 bytes

DeviceType– 1 byte – Device Type of Device

NetvoxPayLoadData– var bytes (Max=9bytes)

(1)Configure R311K device parameter MinTime = 1min、MaxTime = 1min、BatteryChange = 0.1v

Downlink：019E003C003C0100000000

Device return：

819E000000000000000000 (configuration success)

819E010000000000000000 (configuration failure)

(2)Read R311K device parameter

Downlink：029E000000000000000000

Device return：

829E003C003C0100000000 (device current parameter)

Description Device CmdID Device

Type NetvoxPayLoadData

ConfigReport

Req

R311K

0x01

0x9E

MinTime

(2bytes Unit: s)

MaxTime

(2bytes Unit: s)

BatteryChange

(1byte Unit:0.1v)

Reserved

(4Bytes, Fixed 0x00)

ConfigReport

Rsp 0x81 Status (0x00_success) Reserved (8Bytes, Fixed 0x00)

ReadConfigR

eportReq 0x02 Reserved (9Bytes, Fixed 0x00)

ReadConfigR

eportRsp 0x82 MinTime

(2bytes Unit :s)

MaxTime

(2bytes Unit: s)

BatteryChange

(1byte Unit:0.1v)

Reserved

(4Bytes, Fixed 0x00)

Example#1 based on MinTime = 1 Hour, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange=0.1V

MaxTime MaxTime

Sleeping(MinTime) Sleeping(MinTime)

Note: MaxTime=MinTime. Data will only be report according to MaxTime (MinTime) duration regardless BtteryVoltageChange

value.

Example#2 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.

MaxTime

Sleeping(MinTime) sleeping sleeping sleeping

0H 15th M 30th M 45th M 1H 2H

Example#3 based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.

MaxTime

sleeping sleeping

0H 15th M 30th M 45th M 1H 1H 10th M 1H 25th M

Wake up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and collects data

REPORTS 2.8V

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wakes up and collects

data

2.7V |2.7-2.8|=0.1

REPORTS 2.7V Wakes up and

collects data 2.7V

Does not report

Users push the button,

REPORTS 2.7V.

Recalculate MaxTime.

Wakes up and

collects data

2.8V

Does not report

Wakes up and

collects data

REPORT 2.8V

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

2.7V

Does not report

Wakes up and

collects data

REPORT 2.7V

Notes:

(1) The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not

collect data.

(2) The collected data is compared with the last reported data. If the variation of the data is greater than the value of

ReportableChange, the device will report according to MinTime interval. If the data variation is not greater than the last

reported data, the device will report according to MaxTime interval.

(3) We do not recommend setting the MinTime Interval value too low. If the MinTime Interval is too low, the device will wake

up frequently and the battery will be drained soon.

(4) When the device sends a report, no matter the data changes, button is pushed or MaxTime interval comes, another cycle of

MinTime / MaxTime calculation starts.

6. Installation

(1) The device does not have a waterproof function. After the configuration of joining the network is completed,

please place it indoors.

(2) The dust at the installation location should be wiped clean before paste the device.

(3) The battery installation method is as the figure below. (the battery with the "+" side facing up)

Note: The user may need a screwdriver to open the cover.

7. Important Maintenance Instruction

Kindly pay attention to the following in order to achieve the best maintenance of the product:

• Keep the equipment dry. Rain, moisture and various liquids or water may contain minerals that can corrode

electronic circuits. In case the device is wet, please dry it completely.

• Do not use or store in dusty or dirty areas. This way can damage its detachable parts and electronic components.

• Do not store in excessive heat place. High temperatures can shorten the life of electronic devices, destroy batteries,

and deform or melt some plastic parts.

• Do not store in excessive cold place. Otherwise, when the temperature rises to normal temperature, moisture will form

inside which will destroy the board.

• Do not throw, knock or shake the device. Treating equipment roughly can destroy internal circuit boards

and delicate structures.

• Do not wash with strong chemicals, detergents or strong detergents.

• Do not paint the device. Smudges can make debris block detachable parts up and affect normal operation.

• Do not throw the battery into the fire to prevent the battery from exploding. Damaged batteries may also explode.

All the above suggestions apply equally to your device, batteries and accessories.

If any device is not operating properly.

Please take it to the nearest authorized service facility for repairing.

Table des matières

Autres manuels netvox Accessoires

netvox

netvox R718PQA Manuel utilisateur

netvox

netvox R727 Manuel utilisateur

netvox

netvox R718CN2 Manuel utilisateur

netvox

netvox RB11E Manuel utilisateur

netvox

netvox R718N3 Manuel utilisateur

netvox

netvox Z311C Manuel utilisateur

netvox

netvox R311DB Manuel utilisateur

netvox

netvox Z713 Manuel utilisateur

netvox

netvox ZB11C1 Manuel utilisateur

netvox

netvox R718J Manuel utilisateur

netvox

netvox R313WA Manuel utilisateur

netvox

netvox R313B Manuel utilisateur

netvox

netvox R718IJK Manuel utilisateur

netvox

netvox Contact Sensor Series Manuel utilisateur

netvox

netvox R718F2 Manuel utilisateur

netvox

netvox R311FA Manuel utilisateur

netvox

netvox R718AD Manuel utilisateur

netvox

netvox R712 Manuel utilisateur

netvox

netvox RB11E Manuel utilisateur

netvox

netvox R718PB15 Manuel utilisateur

netvox

netvox R311D Manuel utilisateur

netvox

netvox R718N1 Manuel utilisateur

netvox

netvox R718VB Manuel utilisateur

netvox

netvox R718PA9 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur

netvox R311K Manuel utilisateur

Manuels Accessoires populaires d'autres marques