Introduction
3
● Auto match for focal distance or rotation speed
According to the distance of focus, the camera would adjust its rotation speed auto-
matically, which is more convenient than operating it manually.
● Adjust or call presets
Preset is a function which saves some parameters, such as horizontal angles, vertical
angles, focal distance into camera. If needed, users could call these presets quickly, and adjust
the camera to this position. Keyboards are used for saving or calling presets usually; this cam-
era supplies 256 presets.
● Auto Scan
Users could adjust margins with keyboards previously so that the camera could scan
these areas automatically in a constant speed.
● Patrol
By programming previously, network camera would order some presets into the patrol
and scan them automatically. Users could also control the keyboards in order to adjust the
camera in regular period.
● Pattern
The network camera could remember 600-second path or 500 orders. After turning on
this function, the camera would scan the area with adjusted path automatically.
● Memorizes before the power down
If the camera stayed in a position for a few minutes before its power shut down, it
would come back to this position after recharge-in.
● ROI
It could aggregate the streams so that the screen would describe areas more clearly,
which applies to lack of streams.
● Lens Control
1) Zoom
Users could adjust the zoom for shooting close view or distant view.
2) Focus
The default is Auto focus. While focal distance changing, the camera would focus
on the center of views automatically in order to keep image clear. Users could also operate it
manually in some specific cases.
3) Iris
With sensing the environment, the camera would adjust its iris automatically in
order to keep the brightness of images.
4) BLC (Back Light Compensation)
BLC is automatic. If the background has highlight, the camera would adjust the bright-
ness to some darker places. This would shoot a clear view, instead of full-light on the images.
