NetPing 8/PWR-220 v3/SMS Manuel utilisateur

1. [Docs] NetPing 8/PWR-220 v3/SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 [ENG] Netping 8/PWR-220 v3/SMS, User guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.1.1 [8PWR] Copyright and Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.1.2 [8PWR] Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.1.3 [8PWR] Device Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

1.1.4 [8PWR] Sockets and Indication Elements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

1.1.5 [8PWR] Power Supply Channels Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

1.1.6 [8PWR] Sensors Plugin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

1.1.7 [8PWR] Setting Parameters to Default Values (to the Factory Settings) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

1.1.8 [8PWR] Using IO Lines for External Devices Management (in an Output Mode) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

1.1.9 [8PWR] Shipping Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

1.1.10 [8PWR] Operating and Storage Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

1.1.11 [8PWR] Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

1.2 [ENG] NetPing 8/PWR-220 v3/SMS, Firmware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

1.2.1 [ENG] 1. [DKSF 48.4 IU] Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

1.2.2 [ENG] 2. [DKSF 48.4 IU] Receiving a Main Information about a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

1.2.2.1 [ENG] 2.1. [DKSF 48.4 IU] Default Username and Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

1.2.2.2 [ENG] 2.2. [DKSF 48.4 IU] How to Know a Default IP Address and MAC Address of a Device? . . . . . . . . . . . . 25

1.2.2.3 [ENG] 2.3. [DKSF 48.4 IU] Connecting a Device with a Default Authorization to a Web Interface . . . . . . . . . . . 26

1.2.2.4 [ENG] 2.4. [DKSF 48.4 IU] I Need to Know a Firmware Version, a Hardware Version, a Serial Number, a Model of

a Device and Its Uptime . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

1.2.2.5 [ENG] 2.5. [DKSF 48.4 IU] Where Can I See a Name, a Location and Contacts of a Device? . . . . . . . . . . . . . . . . 28

1.2.2.6 [ENG] 2.6. [DKSF 48.4 IU] How to Reboot a Device? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

1.2.3 [ENG] 3. [DKSF 48.4 IU] Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

1.2.3.1 [ENG] 3.1. [DKSF 48.4 IU] How to Configure Name of a Device, Its Location and Contacts? . . . . . . . . . . . . . . . 31

1.2.3.2 [ENG] 3.2. [DKSF 48.4 IU] Where to Change Settings of a Network Interface? . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

1.2.3.3 [ENG] 3.3. [DKSF 48.4 IU] Changing a Username and a Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

1.2.3.4 [ENG] 3.4. [DKSF 48.4 IU] How to Set Community for SNMP? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

1.2.3.5 [ENG] 3.5. [DKSF 48.4 IU] How to Restrict Access to a Device? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

1.2.3.6 [ENG] 3.6. [DKSF 48.4 IU] How to Disable All Notifications Quickly? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

1.2.3.7 [ENG] 3.7. [DKSF 48.4 IU] It Is Necessary to Send SNMP Trap Notifications. How to Configure This? . . . . . . . 37

1.2.3.8 [ENG] 3.8. [DKSF 48.4 IU] How to Set the Clock? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

1.2.3.9 [ENG] 3.9. [DKSF 48.4 IU] I Want to Configure SYSLOG. How to Do This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

1.2.3.10 [ENG] 3.10. [DKSF 48.4 IU] How to Receive Notifications and Reports via Email? . . . . . . . . . . . . . . . . . . . . . . 40

1.2.3.11 [ENG] 3.11. [DKSF 48.4 IU] How to Update Firmware on a Device? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

1.2.3.12 [ENG] 3.12. [DKSF 48.4 IU] What Notifications Has the Log File Got? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

1.2.4 [ENG] 4. [DKSF 48.4 IU] Working with Temperature Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

1.2.4.1 [ENG] 4.1. [DKSF 48.4 IU] What Temperature Sensors a Device Supports? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

1.2.4.2 [ENG] 4.2. [DKSF 48.4 IU] How to Determine a Unique Number of a 1-Wire Sensor? . . . . . . . . . . . . . . . . . . . . . 48

1.2.4.3 [ENG] 4.3. [DKSF 48.4 IU] Where to Read a Current Temperature? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

1.2.4.4 [ENG] 4.4. [DKSF 48.4 IU] Is It Possible to Set a Description for Temperature Sensors? . . . . . . . . . . . . . . . . . . . 50

1.2.4.5 [ENG] 4.5. [DKSF 48.4 IU] Configuring Top and Bottom Margin of a Safe Range for a Temperature Sensor . . . 51

1.2.4.6 [ENG] 4.6. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Status of a Temperature Sensor Is

Changed. How to Do This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

1.2.5 [ENG] 5. [DKSF 48.4 IU] Working with a Humidity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

1.2.5.1 [ENG] 5.1. [DKSF 48.4 IU] What Humidity Sensor a Device Supports? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

1.2.5.2 [ENG] 5.2. [DKSF 48.4 IU] How to Determine a Unique Id of a 1-Wire Humidity Sensor? . . . . . . . . . . . . . . . . . . 55

1.2.5.3 [ENG] 5.3. [DKSF 48.4 IU] Initial Configuration of a Humidity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

1.2.5.4 [ENG] 5.4. [DKSF 48.4 IU] Browsing Readings and Configuring Parameters of a Humidity Sensor in a Web

Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

1.2.5.5 [ENG] 5.5. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Humidity Sensor Status Is Changed.

How to Do This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

1.2.6 [ENG] 6. [DKSF 48.4 IU] Working with Smoke Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

1.2.6.1 [ENG] 6.1. [DKSF 48.4 IU] What Smoke Sensors a Device Supports? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

1.2.6.2 [ENG] 6.2. [DKSF 48.4 IU] How to Determine a Unique Number of a 1-Wire Smoke Sensor? . . . . . . . . . . . . . . . 61

1.2.6.3 [ENG] 6.3. [DKSF 48.4 IU] Initial Configuring of Smoke Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

1.2.6.4 [ENG] 6.4. [DKSF 48.4 IU] Is It Possible to Set Description for Smoke Sensors? . . . . . . . . . . . . . . . . . . . . . . . . . . 63

1.2.6.5 [ENG] 6.5. [DKSF 48.4 IU] How to Browse a Current Status of Smoke Sensors? . . . . . . . . . . . . . . . . . . . . . . . . . . 64

1.2.6.6 [ENG] 6.6. [DKSF 48.4 IU] How to Turn a Power Off and Reset a Smoke Sensor? . . . . . . . . . . . . . . . . . . . . . . . . 65

1.2.6.7 [ENG] 6.7. [DKSF 48.4 IU] I Want to Configure Sending Notifications When a Sensor Status Is Changed. How to

Do This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

1.2.7 [ENG] 7. [DKSF 48.4 IU] Working with Discrete Input-Output Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

1.2.7.1 [ENG] 7.1. [DKSF 48.4 IU] Is It Possible to Set a Description for an Input-Output Line? . . . . . . . . . . . . . . . . . . . 68

1.2.7.2 [ENG] 7.2. [DKSF 48.4 IU] Configuring Operation Mode of an Input-Output Line . . . . . . . . . . . . . . . . . . . . . . . 69

1.2.7.3 [ENG] 7.3. [DKSF 48.4 IU] How to Define a Current Logic Level at an Input-Output Line? . . . . . . . . . . . . . . . . 70

1.2.7.4 [ENG] 7.4. [DKSF 48.4 IU] How to Manage an Input-Output Line in the Output Mode? . . . . . . . . . . . . . . . . . . . 71

1.2.7.5 [ENG] 7.5. [DKSF 48.4 IU] I Want to Configure Sending Notifications When Changing a Logic Level of an

Input-Output Line. How to Do This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

1.2.7.6 [ENG] 7.6. [DKSF 48.4 IU] For What a Filter for Short Noises Is Necessary in Settings of an Input-Output Line? . 74

1.2.8 [ENG] 8. [DKSF 48.4 IU] Working with Built-In Relays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

1.2.8.1 [ENG] 8.1 [DKSF 48.4 IU] Configuring Relay Management Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

1.2.8.2 [ENG] 8.2 [DKSF 48.4 IU] I Want to Configure Sending Notifications on Events of Relay Triggering. How to Do

This? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

1.2.8.3 [ENG] 8.3. [DKSF 48.4 IU] What Is «Watchdog», and How to Configure It? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

1.2.8.4 [ENG] 8.4. [DKSF 48.4 IU] What Is «Schedule», and How to Configure It? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

1.2.9 [ENG] 9. [DKSF 48.4 IU] Working with Device Power Supply Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

1.2.9.1 [ENG] 9.1. [DKSF 48.4 IU] Configuring Power Supply Inputs in a Device Web Interface . . . . . . . . . . . . . . . . . . . 83

1.2.10 [ENG] 10. [DKSF 48.4 IU] Working with the Module «Logic» . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

1.2.10.1 [ENG] 10.1. [DKSF 48.4 IU] What Is «Logic»? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

1.2.10.2 [ENG] 10.2. [DKSF 48.4 IU] How to Use the Module «Logic»? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

1.2.10.3 [ENG] 10.3. [DKSF 48.4 IU] Configuring Thermostat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

1.2.10.4 [ENG] 10.4. [DKSF 48.4 IU] How to Configure Pinger in the Module «Logic»? . . . . . . . . . . . . . . . . . . . . . . . . . . 90

1.2.10.5 [ENG] 10.5. [DKSF 48.4 IU] What Is SNMP SETTER? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

1.2.10.6 [ENG] 10.6. [DKSF 48.4 IU] Reset Signal and Initial Statuses of Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

1.2.10.7 [ENG] 10.7. [DKSF 48.4 IU] Connecting Relays and IO Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

1.2.10.8 [ENG] 10.8. [DKSF 48.4 IU] IR Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

1.2.10.9 [ENG] 10.9. [DKSF 48.4 IU] Examples of Configurations of the Module «Logic» . . . . . . . . . . . . . . . . . . . . . . . . 95

1.2.11 [ENG] 11. [DKSF 48.4 IU] Working with IR Control Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

1.2.11.1 [ENG] 11.1. [DKSF 48.4 IU] How to Record IR Commands Properly? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

1.2.11.2 [ENG] 11.2. [DKSF 48.4 IU] Reproducing IR Commands through a Web Interface . . . . . . . . . . . . . . . . . . . . . . 101

1.2.11.3 [ENG] 11.3. [DKSF 48.4 IU] Is It Possible to Reproduce IR Commands through SNMP? . . . . . . . . . . . . . . . . . 102

1.2.11.4 [ENG] 11.4. [DKSF 48.4 IU] How to Determine a Firmware Version of an IR Module? . . . . . . . . . . . . . . . . . . . 103

1.2.11.5 [ENG] 11.5. [DKSF 48.4 IU] Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

1.2.12 [ENG] 12. [DKSF 48.4 IU] Working with SMS Notifications and an Embedded GSM Modem . . . . . . . . . . . . . . . . . . 105

1.2.12.1 [ENG] 12.1. [DKSF 48.4 IU] How to Know a Balance on a SIM Card? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106

1.2.12.2 [ENG] 12.2. [DKSF 48.4 IU] I Need to Specify a Number for Sending SMS Notifications. How to Do This? . . 107

1.2.12.3 [ENG] 12.3. [DKSF 48.4 IU] How to Enable Detailed Logging for a GSM Modem? . . . . . . . . . . . . . . . . . . . . . . 108

1.2.12.4 [ENG] 12.4. [DKSF 48.4 IU] Checking a GSM Signal Strength . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

1.2.12.5 [ENG] 12.5. [DKSF 48.4 IU] Receiving an SMS Notification about Previously Specified Events . . . . . . . . . . . . 110

1.2.12.6 [ENG] 12.6. [DKSF 48.4 IU] GSM Modem Does not Work. How to Reboot It? . . . . . . . . . . . . . . . . . . . . . . . . . 111

1.2.12.7 [ENG] 12.7. [DKSF 48.4 IU] What SMS Notifications Can a Device Send? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112

1.2.12.8 [ENG] 12.8. [DKSF 48.4 IU] How to Control a Device Using SMS Commands . . . . . . . . . . . . . . . . . . . . . . . . . . 116

1.2.12.9 [ENG] 12.9. [DKSF 48.4 IU] Adjusting Time of Sending a Daily Report about a Status of Sensors and IO Lines as

an SMS Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

1.2.12.10 [ENG] 12.10. [DKSF 48.4 IU] How to Know IMEI of an Embedded GSM Modem? . . . . . . . . . . . . . . . . . . . . . 121

1.2.12.11 [ENG] 12.11. [DKSF 48.4 IU] How to Send Random SMS? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

1.2.13 [ENG] 13. [DKSF 48.4 IU] Device Supporting SNMP Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

1.2.13.1 [ENG] 13.1. [DKSF 48.4 IU] Device Supporting SNMP Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126

1.2.13.2 [ENG] 13.2. [DKSF 48.4 IU] Configuring Sending SNMP TRAP Notifications . . . . . . . . . . . . . . . . . . . . . . . . . . 127

1.2.13.3 [ENG] 13.3. [DKSF 48.4 IU] What OID Are Supported by a Device? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

1.2.13.4 [ENG] 13.4. [DKSF 48.4 IU] Supporting SNMP trap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

1.2.14 [ENG] 14. [DKSF 48.4 IU] Support of URL-Encoded Commands by a Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136

1.2.14.1 [ENG] 14.1. [DKSF 48.4 IU] Controlling IO Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

1.2.14.2 [ENG] 14.2. [DKSF 48.4 IU] Relay Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139

1.2.14.3 [ENG] 14.3. [DKSF 48.4 IU] Controlling Reserving Power Supply Inputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141

1.2.14.4 [ENG] 14.4. [DKSF 48.4 IU] Controlling 1-wire Smoke Sensors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

1.2.14.5 [ENG] 14.5. [DKSF 48.4 IU] Temperature Sensor Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147

1.2.14.6 [ENG] 14.6. [DKSF 48.4 IU] Controlling a Humidity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148

1.2.14.7 [ENG] 14.7. [DKSF 48.4 IU] IR Command Transceiver Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149

[Docs] NetPing 8/PWR-220 v3/SMS

[ENG] Netping 8/PWR-220 v3/SMS, User guide

[8PWR] Copyright and Disclaimer

The information, contained in this document, can be changed by a manufacturer without a prior notice.Although every effort was made to make the

information in this document accurate and without errors, a manufacturer is not liable for their possible presence and for the consequences that may

result from the errors herein. A manufacturer is not liable if supplied equipment, software and this user guide does not correspond to expectations of a

user and his/her opinion about where and how to use all the above.All copyrights on supplied devices, described in this User Guide, as well as firmware

and software of devices and this User Guide belong to NetPing global Ltd. Сopying, replication and translation of this user guide to other

languagesare not allowed without a prior written permission of a rightholder. Copying, replication, changing, disassembling of provided software are

For the part of software that is provided in source codes, there is anot allowed without a prior written permission of a rightholder.

separate license agreement, which defines an order of its use and modification. Other trademarks used in this description belong to corresponding

rightholders.

Developer and manufacturer:

NetPing global Ltd

[8PWR] Introduction

This user guide helps to become familiar with an operation of a device and get an idea about its functionality and technicalNetping 8/PWR-220 v3/SMS

specifications as well as prepare a device for an operation.

A User Guide is designed for network administrators and users, who set up or operate a device. To work with a device properly, a user must have an

idea about the principles of building and functioning of local networks as well as possess the next knowledge and skills:

Basic knowledge in the area of local and global networks;

Basicknowledgeintheareaofarchitectureandprinciples of work of TCP/IP networks;

Basic knowledge in the area of architecture and principles of work of Ethernet networks.

[8PWR] Device Overview

In this section a purpose of a NetPing 8/PWRv3/SMS device is described as well as its appearance.

Purpose of a Device

A NetPing 8/PWRv3/SMS device is an IP PDU device on 8 independently managed power supply channels, divided into two groups with four channels.

A device's peculiarity is having two independent power supply inputs. Each input allows to provide a power supply to one or both groups of 4 output

channels. Switching channels between power supply inputs can be done by a command from a web-interface of a device, from an SNMP interface of a

device, with the help of SMS-message or automatically when a power supply disappears on a main input.

Appearance

A device is designed in standard dimensions for installation in a 19' rack. A height of a device is 1U. Inputs and output power supply channels are on a

front and back panels of a device. Fasteners for mounting in a rack ("ears") can be bolted toNetPing 8/PWRv3/SMS both front and back, which gives a

possibility to mount a device in a rack by any side. An appearance of device is shown on the pictures.

Front panel:

Back panel:

[8PWR] Sockets and Indication Elements

GSM Slots

There are sockets on a front panel on the left to connect an external antenna and a slot to install a SIM card.GSMANT  SIMCard

LAN Sockets

Ethernet 10/100 BASE-T port. A device has two such ports: one on a front panel and another one on a back panel. Together they form a dual port

Ethernet-switch. One port is used for a network connection, another one is used for additional equipment connection (another NetPing device,

administrator's laptop, etc.), which gives an opportunity to avoid installing of an additional switch on a remote site. The ports are equivalent, anyone

can be used for a network connection.

The Ethernet ports have two LEDs. A left one is its glowing means that a device is turned on, its blinking means transferring packages to aCPU,

network. A right one is its lighting means having "link" on this port, its blinking means receiving packages from a network.Link,

RS485 Socket

An RS485 socket is used to connect RS485 devices. An RS485 port can work in one of two modes: either as an RS485– Ethernet interface converter by

a TCP protocol or in an electricity meter CE102 (Energy meter)protocol analysis mode.

1W Sockets

1W sockets are used to plug sensors of a model line V4, which are built on a 1Wire technology.

Important!Connecting both ports to an Ethernet switch with a disabled STP protocol will cause to creation of a loop in an Ethernet segment.

Power Supply Channels Status Indication

On a front panel there are LEDs that indicate a status of the second group of power supply channels. Channels 5 - 8 are included into this group. A

status of each channel is represented by a corresponding LED of an group. A LED is glowing when there is a voltage on an output (a relay isOUT

closed).

220vINOB *A LED shows from what input the second group of channels is fed. A LED glows when a power supply is fed from an input A, which is

located on a back panel of a device.

On a back panel there are LEDs that indicate a status of the first group of power supply channels.Channels 1 - 4 are included into this group. A status

of each channel is represented by a corresponding LED of an group. A LED is glowing when there is a voltage on an output (a relay is closed).OUT

220vINOA *B LED shows from what input the first group of channels is fed. A LED glows when a power supply is fed from an inputB, which is

located on a front panel of a device.

Power Supply Channels

On a front panel there is the second group of power supply channels, with numbers of channels 5 – 8.

On a back panel there is the first group of power supply channels, with numbers of channels 1 -4.

Power Supply Inputs

On a front panel there is a power supply input B.

On a back panel there is a power supply input A.

Sensor Plugin Terminals

On a back panel there is a terminal block for sensors plugin. Assignment of the terminals is from left to right: IO1, IO2, IO3, IO4, SC, SD, +5V, GND.