NETGEAR ARLO PRO Manuel utilisateur

Arlo Pro Quick Start Guide

What’s Included

Base station Base station AC

power adapter

Arlo Pro Wire-Free camera Rechargeable battery

Ethernet cable

Camera AC power

adapter

Magnetic wall mount Mounting screws

Camera power

adapter cable

Outdoor

mount

Outdoor

mount plate

a. Unlock the battery compartment by pressing and holding the latch.

b. Gently pull the battery door back to open the compartment.

Insert the Battery Into Your Camera

c. Align the battery contacts.

d. Insert the battery.

e. Close the battery door.

Note: The Arlo Pro battery is fully charged when

it leaves the factory.

Get the App

For the best experience, download the Arlo app for your smartphone by scanning

this QR code or searching for Arlo in the app store.

https://arlo.netgear.com

Note: If you already use the Arlo app, make sure that you are using the latest

version. To ﬁnd out if an update is available, go to the app store and

search for Arlo.

3Connect Your Base Station to the Internet

a. Connect the base station to your

router using an Ethernet cable.

b. Connect the base station AC

adapter to your base station and

plug it in.

c. Turn the base station on by

pressing the On-O button.

The Power LED and Internet LED

on the front of the base station

light green in about two minutes.

¾To create a new Arlo account:

a. Launch the Arlo app from your smartphone, tap the New to

Arlo? button, and tap Arlo Pro.

If you are using a computer, visit arlo.netgear.com.

b. Follow the onscreen instructions.

Get an Account

¾To add an Arlo Pro camera to an existing Arlo account:

a. If you already set up an Arlo account, log in, and tap or click

Add Device.

b. Follow the onscreen instructions.

Sync Your Cameras With the Base Station

a. Bring the camera within 1 to 3 feet (30 to 100 centimeters) of the

base station.

Note: Cameras must be synced one at a time.

b. Press the Sync button on the top of the base station for about

two seconds and then release the button.

c. Wait for the Sync Status LED to blink green.

d. Press the Sync button on top of the camera for about two

seconds and then release the button.

The camera is ready for viewing.

The LED blinks amber if the sync is not successful. You must repeat the

sync process.

A blue LED on the camera blinks slowly when the sync process starts. The

blue LED blinks rapidly to conﬁrm syncing.

Syncing more than one camera?

Go to Page 9 and repeat steps 5a through 5d for each camera.

Autres manuels pour ARLO PRO

Table des matières

Autres manuels NETGEAR Système de sécurité

NETGEAR

NETGEAR Arlo Manuel utilisateur

NETGEAR

NETGEAR Arlo Manuel utilisateur

NETGEAR

NETGEAR Arlo Manuel utilisateur

NETGEAR

NETGEAR Arlo Manuel utilisateur

NETGEAR

NETGEAR Arlo Wire-Free Manuel utilisateur

NETGEAR

NETGEAR ARLO VMS3430 Manuel utilisateur

NETGEAR

NETGEAR VueZone Manuel utilisateur

NETGEAR

NETGEAR STS7000 Manuel utilisateur

NETGEAR

NETGEAR Arlo Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur