NETGEAR WN3500RP Manuel utilisateur

Universal Dual Band WiFi Extender – Desktop/Wallplug

WN3500RP Installation Guide

Extended Wireless Range

Existing Router Range

5 GHz Wireless

2.4 GHz Wireless

2.4 AND 5 GHz

WIRELESS

EXTENSION

EXISTING

ROUTER

CONNECT WIRED

DEVICES WIRELESSLY

Technical Support

Thank you for selecting NETGEAR products.

After installing your device, locate the serial number on the label of your

product and use it to register your product at https://my.netgear.com.

You must register your product before you can use NETGEAR telephone

support. NETGEAR recommends registering your product through the

NETGEAR web site.

Phone (US only): 1-888-NETGEAR

Phone (Other Countries):

See http://support.netgear.com/general/contact/default.aspx.

Trademarks

NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks

and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the

United States and/or other countries. Information is subject to change without

notice. Other brand and product names are registered trademarks or

Statement of Conditions

In the interest of improving internal design, operational function, and/or

reliability, NETGEAR reserves the right to make changes to the products

described in this document without notice. NETGEAR does not assume any

liability that may occur due to the use or application of the product(s) or circuit

layout(s) described herein.

Contents

Hardware Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Place the Extender and Apply Power . . . . . . . . . . . . . . . . . 7

Connect the Extender to an Existing

WiFi Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Extender Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

FastLane™ Technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

One-Port WiFi Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

When to Use the Extender Wireless Network . . . . . . . . . . . . . 16

ReadySHARE Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Music Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Wireless SSIDs and Passwords . . . . . . . . . . . . . . . . . . . . . . . 19

Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Hardware Features

The LEDs on the front show how the extender is working.

Link Rate. Indicates a 2.4 GHz

or 5 GHz wireless connection

between the extender and a

router. The appropriate LED

lights to indicate the type of

connection:

• Green is best.

• Amber is good.

• Red is poor.

• Off. Not connected to router.

WPS

Link Rate

Extender

2.4 GHz

Wireless

Device

Link Rate

5 GHz

Power

On/Off

Wireless Device to Extender.

This LED is solid green when

the extender is connected to a

wireless device.

WPS. This LED indicates

a WPS wireless connection.

• Solid green. There is wireless

security (WPA or WPA2).

• Blinking green. A WPS

connection is in progress.

• Off. No wireless security.

The top and side panels have the following features:

On/Off button. Use this button to turn

the extender on and off.

Reset

factory

settings

On/Off

button

WPS

button

Ethernet

port

Audio

port

USB

port

WPS button. Use this button to connect

the extender to your existing WiFi

network. For more information, see

Connect the Extender to an Existing WiFi

Network on page 7.

Ethernet port. Use the Ethernet port on

the extender to connect an Ethernet-

enabled device wirelessly to your

network.

Audio port. Use the Audio port to

connect the extender to your speaker.

USB port. Use the USB port to connect

the extender to a printer.

Reset factory settings. To reset the

extender to its original factory settings,

insert a paper clip into the reset hole and

hold it until the Power LED flashes.

Insert the AC plug like this:

Attach the stand like this:

Getting Started

The WiFi Range Extender extends the wireless network to include the

area outside the range of your existing WiFi network. The extender

supports both desktop and wall plug placement. Follow these steps to

set up the extender.

Place the Extender and Apply Power

1. Place the extender an equal distance between your router and the

wireless device located outside the range of your router.

DO DON’T

Tip: If you have to use a different location, move the

extender closer to the device, but still within the

wireless range of the router. Configure the

extender and router in the same room. Once you

have verified the working connection, move the

extender to a location that is midway between

the router and your computer, and still displaying

a green link rate.

2. Plug the extender into an electrical outlet, and wait 1 minute until

the extender starts. The Power LED turns green.

Connect the Extender to an Existing

WiFi Network

To extend the range of your WiFi network, you must connect the

extender to your existing WiFi network. You have two options to

connect the extender to your network.

Option 1: Connecting with WPS (Wi-Fi Protected Setup)

WPS lets you easily join a secure WiFi network without typing the

network name and password. The WPS button is a physical

button on the WiFi router, gateway, or access point.

If your router supports WPS (Wi-Fi Protected Setup), NETGEAR

recommends that you use Option 1; otherwise, go to Option 2.

Tip: WPS does not support WEP network security.

If you are using WEP security, use Option 2

to connect.

Option 2: Connecting without WPS, using the web browser

setup guide

The web browser setup guide walks you through the necessary

steps to connect your extender to an existing WiFi network.

Connecting with WPS (Option 1)

1. Press the WPS button on back panel of the extender. The WPS

LED on the front blinks.

2. Within 2 minutes, press the WPS button on your wireless router,

gateway, or access point.

If successful, the WPS LED on your extender turns solid green,

the 2.4 GHz Link Rate LED lights up, and the extender is

connected to your existing WiFi network.

Note: If the 2.4 GHz Link Rate LED does not

turn green, repeat steps 1 and 2, or

make sure your router supports WPS.

3. If your router supports the 5 GHz band, repeat steps 1 and 2 to

connect the extender to the 5 GHz band. The 5 GHz Link Rate LED

on your extender lights up.

The extender’s wireless network name (SSID) changes to your

existing WiFi network name, with _2GEXT or _5GEXT at the end

of the name, depending on whether the extender is connecting to

your WiFi network in 2.4 GHz or 5 GHz.

Existing WiFi network name: MyNetworkName

New Extender network name: MyNetworkName_2GEXT

To connect additional WiFi devices to your extender network, use

the same network security key (password) as the one that is set

on your existing wireless network/wireless router.

Autres manuels pour WN3500RP

Table des matières

Autres manuels NETGEAR Extenseur

NETGEAR

NETGEAR WN3000RP Manuel utilisateur

NETGEAR

NETGEAR EX6400 Manuel utilisateur

NETGEAR

NETGEAR AX1600 Manuel utilisateur

NETGEAR

NETGEAR AC750 Manuel utilisateur

NETGEAR

NETGEAR RangeMax WPN824EXT Manuel utilisateur

NETGEAR

NETGEAR XAVN2001 Manuel utilisateur

NETGEAR

NETGEAR XAVB2602 Manuel utilisateur

NETGEAR

NETGEAR EAX14 Manuel utilisateur

NETGEAR

NETGEAR EAX11v2 Manuel utilisateur

NETGEAR

NETGEAR PowerLine XWNB5602 Manuel utilisateur

NETGEAR

NETGEAR Nighthawk X4S Manuel utilisateur

NETGEAR

NETGEAR WN2500RP Manuel utilisateur

NETGEAR

NETGEAR EX6150v2 Manuel utilisateur

NETGEAR

NETGEAR EX7320 Manuel utilisateur

NETGEAR

NETGEAR EX3110 Manuel utilisateur

NETGEAR

NETGEAR AXM765v2 Manuel utilisateur

NETGEAR

NETGEAR WGX102 Manuel utilisateur

NETGEAR

NETGEAR EAX15 Manuel utilisateur

NETGEAR

NETGEAR WN2000RPTv1 Manuel utilisateur

NETGEAR

NETGEAR RangeMax WPN824EXT Manuel utilisateur

NETGEAR

NETGEAR WN3100RP Manuel utilisateur

NETGEAR

NETGEAR XAVN2001 Manuel utilisateur

NETGEAR

NETGEAR EX3920 Manuel utilisateur

NETGEAR

NETGEAR EX7000 Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur