10. You will now lose connectivity to the NP124 configuration page as the IP address of the NP124
changes once repeater mode has been successfully configured. To confirm the change of IP address
for the NP124 open a command prompt:
11. Click Start > All Programs > Accessories > Command Prompt.
12. In the command prompt type “ipconfig” and press the enter key on your keyboard. The default
gateway address of the Ethernet adapter Local Area Connection should now be the same IP
address as the access point the NP124 is acting as a repeater for. As can be seen in the above
screen-shot the Default Gateway address of the NP124 has changed from 192.168.20.1 to
192.168.1.1. The NP124 is now repeating for the other access point and you should now have
network access through the NP124 to the other access point's network.
