NetComm Wireless NRB-51 Manuel utilisateur

User Guide

NRB-51 Outdoor Wireless Antenna (Dundee)

Outdoor Wireless Antenna (NRB-51)

www.netcommwireless.com

UM-00017 rev 1.0

The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,

reproduced, in any form, or by any means without prior written consent of NetComm Wireless.

Trademarks and registered trademarks are the property of NetComm Wireless Limited or their respective owners. Specifications are

subject to change without notice. Images shown may vary slightly from the actual product.

Note: This document is subject to change without notice.

Save our environment

When this equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separately from

domestic waste.

The cardboard box, the plastic contained in the packaging, and the parts that make up this device can be recycled in accordance

with regionally established regulations. Never dispose of this electronic equipment along with your household waste. You may be

subject to penalties or sanctions under the law. Instead, ask for disposal instructions from your municipal government.

Please be responsible and protect our environment.

This guide covers the following products:

Outdoor Wireless Antenna (NRB-51)

DOCUMENT VERSION

DATE

1.0 Initial document release

March 02, 2016

www.netcommwireless.com

Outdoor Wireless Antenna

UM-00017 rev 1.0

Table of Contents

Overview ........................................................................................................................................................................................4

Introduction...................................................................................................................................................................................................4

Target audience.............................................................................................................................................................................................4

Prerequisites .................................................................................................................................................................................................4

Notation ........................................................................................................................................................................................................4

Product introduction......................................................................................................................................................................5

Product overview...........................................................................................................................................................................................5

Product features............................................................................................................................................................................................5

Package contents..........................................................................................................................................................................................5

Physical dimensions and interfaces .............................................................................................................................................6

Physical dimensions ......................................................................................................................................................................................6

Interfaces ......................................................................................................................................................................................................7

Installing the Outdoor Unit ............................................................................................................................................................8

Determining the best location for the Outdoor unit ..........................................................................................................................................8

Mounting options...........................................................................................................................................................................................9

Connecting the Outdoor Unit ......................................................................................................................................................10

Powering the Outdoor Unit........................................................................................................................................................................... 10

POE-02 LED indicators................................................................................................................................................................................ 10

Communicating with the Outdoor unit ..........................................................................................................................................................11

Firmware Upgrade on Windows 8/8.1/10 PCs.............................................................................................................................................. 13

Admin Shell Session Using SSH................................................................................................................................................................... 16

Connection Manager ...................................................................................................................................................................................17

Useful Commands....................................................................................................................................................................................... 20

Specifications ..............................................................................................................................................................................................22

Appendix A: Tables......................................................................................................................................................................23

Safety and product care..............................................................................................................................................................24

Product Warranty.........................................................................................................................................................................27

Outdoor Wireless Antenna (NRB-51)

www.netcommwireless.com

UM-00017 rev 1.0

Overview

Introduction

This document provides you the information you need to set up, configure and use the NetComm Wireless NRB-51 Outdoor

Wireless Antenna, also referred to as OWA (Dundee) in the document.

Target audience

This document is intended for system integrators or experienced hardware installers who understand telecommunications

terminology and concepts.

Prerequisites

Before continuing with the installation of NRB-51, please confirm that you have the following:

A laptop with a working Ethernet network adapter and web browser.

Adjustable wrench, a nutdriver set, screwdrivers and appropriate screws for mounting the outdoor unit.

Ethernet cable long enough to reach from the Outdoor unit mount location to the indoor unit (POE-02) mount location,

RJ45 heads and a crimping tool

Shorter Ethernet cable long enough to reach from the indoor unit (POE-02) to the Arris RG.

A device with WiFi client to access the installation alignment tool’s web browser

Notation

The following symbols are used in this user guide:

The following note requires attention.

The following note provides a warning.

The following note provides useful information.

www.netcommwireless.com

Outdoor Wireless Antenna

UM-00017 rev 1.0

Product introduction

Product overview

Rural and regional homes and businesses, remote commercial sites and metropolitan fringe districts located beyond the reach of

fixed line infrastructure rely on mobile networks to access broadband Internet.

Designed to optimize signal strength in weak signal areas, the NetComm Wireless NRB-51 Outdoor Wireless Antenna (OWA) is

positioned on the exterior of the premises to overcome distance limitations and geographical obstructions, and deliver high-speed

LTE broadband connectivity to wired and wireless clients in the property via an indoor router.

Product features

Attractive compact ID that can withstand harsh weather elements

Software upgrade path to support 4x4 MIMO

Designed to meet applicable GR-1089 immunity & surge tests

Proven and documented installation optimized for speed, safety and accuracy

Package contents

The NetComm Wireless NRB-51 in-box contents include:

1 x NetComm Wireless NRB-51 (also referred to as OWA) device

1 x Assembled mount (2” DTV compatible) with 5 screws

If any of these items are missing or damaged, please contact NetComm Wireless Support immediately. The NetComm Wireless

Support website can be found at: http://support.netcommwireless.com.

Outdoor Wireless Antenna (NRB-51)

www.netcommwireless.com

UM-00017 rev 1.0

Physical dimensions and

interfaces

Physical dimensions

Below is a list of the physical dimensions of the NRB-51

Figure 1 –NTC-140W Series router Dimensions

NRB-51 OWA DIMENSIONS

Length

17.4” (442.0 mm)

Width

11.22” (285.0mm)

Height

6.3” (Assembled with mount)

Weight

5.9 lbs with cavity filter

7.1 lbs (Assembled with mount)

Table 1 - Device Dimensions

www.netcommwireless.com

Outdoor Wireless Antenna

UM-00017 rev 1.0

Interfaces

Figure 2 - Interfaces

NO.

ITEM

DESCRIPTION

Antenna panel

Includes 2 x pairs Cross polarised antennas and GPS antenna

Installation alignment port

SMA connector for GPS antenna (not included in package).

SIM hatch

Open the hatch to insert SIM here

POE Gigabit Ethernet port

Provides power and data connectivity to the OWA with Ethernet cable

Table 2 –Interfaces

Antenna Panel

POE Gigabit

Ethernet port

Install alignment

port

SIM hatch

Outdoor Wireless Antenna (NRB-51)

www.netcommwireless.com

UM-00017 rev 1.0

Installing the Outdoor Unit

The image below illustrates a typical installation of the WNTD Outdoor Unit.

Determining the best location for the Outdoor unit

Determining the best location for the Outdoor Wireless Antenna (OWA) involves:

1. Performing a survey of the site using the RF alignment tool and

2. Consulting the customer about positioning based on results of the RF test, aesthetics and any planned renovations to the

property that may affect the mounting location.

When selecting a location to mount the OWA, ensure that:

lock of the desired cell and optimal signal level is achieved.

the mounting position is unobtrusive and aesthetically pleasing where possible.

the mount/antenna is not closer than 1 meter from other antenna equipment.

strata or heritage properties have obtained approval for the installation. This is the sole responsibility of the customer.

the OWA is mounted only in locations which adhere to the following property diagram:

Where possible, avoid mounting the OWA so that it is aimed back over the roof of the property.

www.netcommwireless.com

Outdoor Wireless Antenna

UM-00017 rev 1.0

Mounting options

Two options available for the mounting brackets as shown in the images below:

1) Slide on the pole

2) Top of the pole

Outdoor Wireless Antenna (NRB-51)

www.netcommwireless.com

UM-00017 rev 1.0

Connecting the Outdoor Unit

Powering the Outdoor Unit

Power over Ethernet (PoE) is a method of connecting network devices through Ethernet cable where power and data are passed

along a single cable. It is therefore a convenient method of powering the OWA.

Note that POE-02 is packaged and supplied separately.

To power the OWA:

1. Connect a straight-through Ethernet cable (not included in the package) to the Ethernet port of the OWA then connect the

other end of the cable to the Ethernet port labelled “WALL”on the POE-02..

2. Use another Ethernet cable (not included in the package) to connect the indoor router to the “Router”port of the POE-02.

3. Connect the power cable to the POE-02 and then plug it in to an available wall socket. Examine the Power and ANTENNA

LEDs of the POE and compare them with the LED table below. When both the POWER and ANTENNA LEDs are solid

green, the OWA unit is correctly powered and connected.

POE-02 LED indicators

The table below describes the status of the POWER and ANTENNA LEDs on the PoE injector.

LED

STATUS

DESCRIPTION

POWER

Solid green

PoE injector is connected to AC power.

ANTENNA

Solid green

PoE injector is connected to AC power and the POE port is connected to the OWA.

Table des matières

Manuels Antenne populaires d'autres marques

Alfa Network

Alfa Network APA-L01 Manuel utilisateur

Naval

Naval PR-422CA Manuel utilisateur

Feig Electronic

Feig Electronic ID ISC.ANTH200/200 Series Manuel utilisateur

TERK Technologies

TERK Technologies TV44 Manuel utilisateur

Directive Systems & Engineering

Directive Systems & Engineering DSE2324LYRMK Manuel utilisateur

HP J8999A Manuel utilisateur

MobilSat

MobilSat MSP-S Manuel utilisateur

Steren

Steren ANT-UHF 13 Manuel utilisateur

Novatel

Novatel 600-G Manuel d'utilisation

Radio Shack

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Manuel utilisateur

TRENDnet

TRENDnet TEW-AO12O Manuel utilisateur

Radio Shack

Radio Shack 15-1837 Manuel utilisateur

CommScope

CommScope CMAX-OMFX-43M-I53 Manuel utilisateur

Ramsey Electronics

Ramsey Electronics DAP25 Manuel utilisateur

COBHAM

COBHAM SAILOR 800 VSAT Manuel d'utilisation et d'entretien

Trango Systems

Trango Systems AD900-9 Manuel utilisateur

Steren

Steren ANT-100 Manuel utilisateur

Proxim

Proxim 5054-PA-23 Manuel utilisateur