Copyright © 2002 Net Safety Monitoring Inc.
Printed in Canada
This manual is providedforinformational purposes only. Althoughthe informationcontained in this manual is
believedto be accurate, itcould include technical inaccuracies ortypographical errors. Changes are, therefore,
periodically made to the information within this document and incorporated without notice into subsequent
revisions of the manual. Net Safety Monitoring Inc. assumes no responsibility forany errors that may be
containedwithin this manual.
This manual is a guide forthe use of a VID-C and the data and procedures contained within this document have
been verified and are believed to be adequate forthe intendeduse of the camera . If the cameraorprocedures are
used forpurposes otherthan as described in the manual without receiving priorconfirmation of validity or
suitability, Net Safety Monitoring Inc. does not guarantee the results and assumes no obligation orliability.
No part of this manual may be copied, disseminated ordistributed without the express written consent of Net
Safety Monitoring Inc.
Net Safety Monitoring Inc. products, are carefully designed and manufactured fromhigh quality components and
can be expected to provide many years of trouble free service. Each product is thoroughly tested, inspected and
calibrated priorto shipment. Failures can occurwhich are beyond the control of the manufacturer. Failures can be
minimized by adhering to the operating and maintenance instructions herein. Where the absolute greatest of
reliability is required, redundancy should be designed into the system.
Net Safety Monitoring Inc., warrants its sensors and detectors against defective parts andworkmanship fora
period of 24 months fromdate of purchase and otherelectronic assemblies for36 months fromdate of purchase.
No otherwarranties orliability, expressed orimplied, will be honored by Net Safety Monitoring INC
Contact Net Safety Monitoring Inc. oran authorized distributorfordetails.
