Nespresso Gemini Series Manuel utilisateur

pg. 1 TQM_057 Effective: September 2016

Business Solutions

Australia & New Zealand

DESCALING INSTRUCTIONS

For Professional Machines:

Gemini, Cappuccinatore and Zenius

An expert is available to help you 24/7 on AU 1800 182 206 or NZ 0800 466 060 (Toll free)

pg. 2 TQM_057 Effective: September 2016

CONTENTS:

Safety instructions

Page 3

How to identify your Gemini Model

Page 4

Gemini CS220 (CS223) (Types 734 & 904)

Page 5

Gemini CS220 (Type 702), CS200, CS100

Page 6

Cappucinatore CS20

Page 8

Zenius ZN100

Page 9

pg. 3 TQM_057 Effective: September 2016

Safety Instructions

Before starting the descaling process, please make sure you have read the

Safety Notices (additional manual)

Descaling Solution Safety Information

Warning –Causes serious eye irritation

Keep out of reach of children.

Wear Eye/Face and Hand protection when handling.

In case of contact with eyes, rinse immediately with plenty of water and

see medical advice.

In case of contact with skin, remove affected clothing and wash all

exposed skin area with mild soap and water, followed by warm water rinse.

If swallowed, seek medical advice immediately and show the pack or label.

Descaling Agent can damage surfaces. Please use as per instructions.

pg. 4 TQM_057 Effective: September 2016

Important Note: How to identify your Gemini model

Differentiating CS220 (CS223) (Types 734 & 904) and CS220 (Type 702)

- CS220 (CS223) Types 734 & 904= Black Colour Machine Top

- CS220 Type 702= Grey Colour Machine Top

- Refer to machine type plate at the back of the machine.

pg. 5 TQM_057 Effective: September 2016

DESCALING INSTRUCTIONS FOR GEMINI CS223

Please refer to Page 4 to identify your Gemini model

IMPORTANT NOTE- Before starting the descaling process ensure that you

have read the safety instructions on the box and have the following items

available:

Descaling Kit:

CS223 –DKB2C2/B2B (use 6 x 100ml pouches of descaling liquid each time)

Descaling Tray:

5035/GEMINI (Descaling tray, plastic tube, spanner for steam nozzle)

Turn the white tap (Direct water connection) behind the machine to the

off position (Vertical)

Empty all drip trays and capsule containers and insert them back into place.

Place some container under each of the spouts to collect the water.

Press Standby on/off button on the machine. Wait until the red light in the

button stops flashing. All the cup lights should be off.

Press and hold the “Ristretto/Short Black”and “Lungo/Long Black”

buttons on the left side head, and the “standby” button.

The menu will appear on the display after few seconds.

Press the scroll “UP” (Lungo/Long Black) button or scroll “DOWN”

(Ristretto/Short Black) button until it displays “start descaling” Then press

the middle cup (Cappuccino Latte) button to “SELECT”.

Screen will then display “Fill descaling fluid push a button”

- Fill the left side tank with 2 litres of water.

Add 4 x 100ml pouches of descaling solution.

- Fill the right side tank with 1 litre of water.

Add 2 x 100ml pouches of descaling solution.

- Then push any cup button.

NOTE: The water capacity for the machine is listed below:

Machine

Water tank capacity

CS223

3 Litres

The machine will now start descaling.

Water will pour out from each spout. When this cycle has finished, it will

stop and display “Fill water push a button“. Empty the water tanks and rinse

them. Fill the water tanks to the top with clean water and then press any

cup button again for a rinsing cycle.

Important –If for any reason you need to STOP the descaling process,

press the STANDBY button.

The machine will automatically stop when it has finished rinsing. Display

will show “Exit push a button.”

Push any cup button and the machine will return to its normal state.

Descaling process is now complete and the machine can be used.

pg. 6 TQM_057 Effective: September 2016

DESCALING INSTRUCTIONS FOR GEMINI, CS220, CS200 and CS100

Please refer to Page. 4 to identify your Gemini model

IMPORTANT NOTE- Before starting the descaling process ensure that you

have read the safety instructions on the box and have the following items

available:

Descaling Kit:

CS220 –DKB2C2/B2B (use 6 x 100ml pouches of descaling liquid each time)

CS200 –DKB2C2/B2B (use 4 x 100ml pouches of descaling liquid each time)

CS100 –DKB2C2/B2B (use 2 x 100ml pouches of descaling liquid each time)

Descaling Tray:

5035/GEMINI (Descaling tray, plastic tube, spanner for steam nozzle)

NOTE –Do not push any buttons unless the display asks you to, or interrupt

the process. If it is interrupted, you will have to start from the beginning.

Important –If for any reason you need to STOP the descaling process, press the

STANDBY button.

If your machine has direct water connection, turn the white switch at the back

to the OFF position. (vertical position)

Switch the machine to standby mode by switching off the on/off switch at the

front

(Not applicable to CS100 with serial number 100 xxx xxx onwards)

For the CS100 with a (M) button press and hold (M) until it displays “Language:

English”.

Empty all the drip trays and insert them back on the machine.

Remove the Milk Container and store away in the fridge. Dispose of the straw.

Unscrew steam nozzle and attach plastic tube in its place.

(Not applicable to CS200 and CS100)

Put the descaling tray(s) on top of the machine’s drip trays.

Ensure the machine has at least 1L of water in its tank(s)

Press all three cup buttons for a minimum of 3 secs on any one side of the

coffee machine until “LANGUAGE” appears on the display.

(For CS100 with serial number 100 xxx xxx onwards, press button (M) to

access menu)

Press the Lungo/Long Black cup button three times to scroll down the menu until

the display shows “DESCALING”

Press the middle cup/”Cappuccino Latte” button to select descaling.

The machine will start rinsing and soon display (in about 5 –30 secs) will show

“FILL DESCALING FLUID AND PUSH A BUTTON”

pg. 7 TQM_057 Effective: September 2016

Lift both water tanks away from the machine and fill the left side tank with 2

litres of water and the right side tank with 1 litre of water.

Empty 4 pouches of descaling liquid in left side tank and 2 pouches in the

right side tank.

(For CS200 and CS100, fill 1 litre of water in each tank and empty 2

pouches in each tank)

NOTE: The water capacity for the following machines are listed below:

Machine

Water tank capacity

CS100

3 Litres

CS200

3 Litres

CS220

3 Litres

For CS100,

For CS200,

For CS220,

Put the tanks back on the machine and push any button. Descaling will begin

automatically.

If the descaling does not begin, lift both water tanks for few seconds, put them

back on the machine and push a button.

The machine should start descaling.

Descaling will continue

~ 3 min, liquid will flow through the plastic tube

~ 20 secs idle time

~ 90 secs liquid will flow through the steam line

~20 secs idle time

Then liquid will flow through the coffee nozzles

Automatic stop and FILL WATER will display

Discard all the liquid in the descaling tray.

Rinse and place back on top of the machine’s drip trays.

Clean and rinse both the tanks and fill them with clean water.

Put the water tanks back on the machine.

Push a button to begin the rinsing process.

The machine will start rinsing

~90 secs liquid will flow through the plastic tube

~15 secs idle time

~40 secs liquid will flow through the steam line

~20 secs idle time

Then liquid will flow through the coffee nozzles

Automatic stop and EXIT, PUSH A BUTTON will display. Push any cup

button to exit.

The machine is now ready to use.

pg. 8 TQM_057 Effective: September 2016

DESCALING INSTRUCTIONS FOR CS20

IMPORTANT NOTE- Before starting the descaling process

ensure that you have read the safety instructions on the box

and have the following items available:

Descaling Kit:

CS20 –DKB2C2/B2B (use 1 x 100ml pouch of descaling liquid

each time)

Descaling Tray:

5035/GEMINI (Descaling tray, plastic tube, spanner for steam

nozzle)

The machine needs to be completely cold before descaling.

Unplug machine and let it cool down for about 20 minutes.

Remove milk canister from the machine. Unscrew the nozzle

tip with the red rings clockwise.

[If available, attach the anti-splatter silicon tube (from

5035/GEMINI descale kit) in place of the nozzle tip.

Alternatively, continue procedure with the nozzle tip

removed.]

Place a container or descaling tray underneath the milk

spout. Empty container and insert back into the machine.

Fill up water tank with 1 x 100 ml pouch of descaling

solution diluted with 0.45L of water.

Put the machine in standby mode. The machine should be switched on at the power point. And the

on/off button should be illuminated red. The cup and plus button should be off.

Press and hold cup and plus button until the buttons light up

orange. Descaling solution should start pouring out from

nozzle. (If the buttons are flashing orange alternately this

means the machine is too hot and you need to unplug the

machine and let the machine cool down.)

Important –If for any reason you need to STOP the

descaling process, press the STANDBY button.

Let all the solution pour out from the nozzle until the machine

automatically stops.

Remove the water tank and drip tray, clean and rinse.

Fill up the water tank with 0.45L of water. Insert water tank

and drip tray back onto the machine. Press the cup button

again to start the rinsing process. Water will pour out and

automatically stop once complete.

[Unscrew anti-splatter silicon tube clockwise (from

5035/GEMINI descale kit) if used]

Re-attach nozzle tip with the red rings by screwing counter

clockwise.

Descaling is now complete and the machine is now ready to be used.

pg. 9 TQM_057 Effective: September 2016

DESCALING INSTRUCTIONS FOR ZENIUS ZN100

IMPORTANT NOTE- Before starting the descaling process ensure that you

have read the safety instructions on the box and have the following items

available:

Descaling Kit:

ZN100 –DKB2C2/B2B (use 1 x 100ml pouch of descaling liquid each time)

Empty Container (min. 1.5L Capacity)

Clockwise rotating red lights indicate that the machine needs to be

descaled.

To start the descaling process switch the machine "OFF"

*Please ensure the lever is closed.

Fill tank with 1 litre of water and 2 x 100ml pouches of Nespresso

descaling solution.

NOTE: The water capacity for the machine is listed below:

Machine

Water tank capacity

ZN100

2 Litres

Attach water tank to the machine.

Place an empty container (1.5L) under the coffee outlet.

Press and hold the Ristretto/Short Black button and switch the machine

"ON"

Ristretto/Short Black button will light up red.

pg. 10 TQM_057 Effective: September 2016

Press the Ristretto/Short Black button to start descaling process.

Descaling liquid will flow from the coffee and hot water nozzle.

Important –If for any reason you need to STOP the descaling process,

press the ON/OFF button.

When descaling is finished, the Lungo/Long Black button will light up red.

Empty the water receptacle and put it back under the coffee outlet.

Empty the water tank and rinse it with clean water. Fill the tank with clean

water and attach it to the machine.

Press the Lungo/Long Black button to start the rinsing process.

Note: - The machine will require 2 rinses.

When the first rinse has finished, the flow will stop and Lungo/Long Black

button will remain lit up red.

Refill water tank with clean water and press the Lungo/Long Black button (to

start the 2nd rinse), When the 2nd rinsing has finished, the flow will stop.

Ristretto/Short Black, Espresso/Cappuccino Latte and Lungo/Long Black

buttons will flash white while the machine is heating up. The machine is now

ready to be used.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Nespresso Cafetière

Nespresso

Nespresso KRUPS my machine Manuel utilisateur

Nespresso

Nespresso Citiz Manuel utilisateur

Nespresso

Nespresso CITIZ PLATINUM Manuel utilisateur

Nespresso

Nespresso VERTUO NEXT MY MACHINE YY4296 Manuel utilisateur

Nespresso

Nespresso CITIZ PLATINUM Manuel utilisateur

Nespresso

Nespresso 704 Manuel utilisateur

Nespresso

Nespresso ES 50 PRO Manuel utilisateur

Nespresso

Nespresso 3035 Manuel utilisateur

Nespresso

Nespresso ESSENZA MINI Series Manuel utilisateur

Nespresso

Nespresso CITIZ&MILK C123 Manuel utilisateur

Nespresso

Nespresso KRUPS my machine INISSIA YY1531FD Manuel utilisateur

Nespresso

Nespresso LATTISSIMA PREMIUM Manuel utilisateur

Nespresso

Nespresso inissia Manuel utilisateur

Nespresso

Nespresso PIXIE C60 Manuel utilisateur

Nespresso

Nespresso Citiz Manuel utilisateur

Nespresso

Nespresso PRODIGIO&MILK Manuel utilisateur

Nespresso

Nespresso BARISTA Manuel utilisateur

Nespresso

Nespresso DeLonghi LATTISSIMA ONE Manuel utilisateur

Nespresso

Nespresso magimix 11341NESPRESSO M130U Manuel utilisateur

Nespresso

Nespresso GEMINI CS 100 PRO - SECURITE Manuel utilisateur

Nespresso

Nespresso Essenza Mini C30 Manuel utilisateur

Nespresso

Nespresso GEMINI CS 100 PRO - SECURITE Manuel utilisateur

Nespresso

Nespresso Citiz Manuel utilisateur

Nespresso

Nespresso Evoluo Manuel utilisateur

Manuels Cafetière populaires d'autres marques

Taurus

Taurus Livorno 6 Manuel utilisateur

Delta-q

Delta-q QUICK Manuel utilisateur

Bunn

Bunn LCA-1 Guide de dépannage

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Instructions d'installation

Saeco

Saeco Vienna Plus Sup 018M Manuel utilisateur

DeLonghi

DeLonghi DC300 Manuel utilisateur

INCAPTO

INCAPTO BXCO1470E Manuel utilisateur

Bosch

Bosch TASSIMO finesse TAS16B Series Manuel utilisateur

Exido

Exido 245-072 Manuel utilisateur

Animo

Animo OptiVend Choco Manuel utilisateur

Siemens

Siemens TQ505DF Series Manuel utilisateur

DeLonghi

DeLonghi ECI341 Manuel utilisateur

Krups

Krups KT406511 Manuel utilisateur

Cimbali

Cimbali M32 Classic Manuel utilisateur

Philips

Philips HL3844N Manuel utilisateur

Bosch

Bosch TES 515 SERIES Manuel utilisateur

Tekmatix

Tekmatix TMFM - 65 Manuel utilisateur

Scarlett

Scarlett SC-CM33005 Manuel utilisateur