Neptune Systems COR-15 Manuel utilisateur

COR USER GUIDE

APEX-CONNECTED COR-15 & COR-20

 
CONTENTS 
INTRODUCTION.............................................................................................................. 1 
COR FEATURES AND SPECIFICATIONS ........................................................................... 2 
WHAT’S IN THE BOX....................................................................................................... 3 
GET TO KNOW YOUR COR DRIVER .................................................................................. 4 
GET TO KNOW YOUR COR PUMP ..................................................................................... 5 
APEX SYSTEM FIRMWARE REQUIREMENTS..................................................................... 5 
PHYSICAL INSTALLATION –COR-15 AND COR-20 DRIVER............................................. 6 
PHYSICAL INSTALLATION –COR PUMP.......................................................................... 7 
COR PUMP AND COR DRIVER CONNECTION ............................................................. 8 
COR-20 CONNECTION TO APEX SYSTEM AND POWER..................................................... 9 
COR-15 CONNECTION TO APEX SYSTEM ....................................................................... 10 
COR DRIVER FIRMWARE UPDATE ................................................................................. 10 
COR DRIVER STATUS LED PANEL AND LED BAR............................................................ 12 
COR DRIVER BUTTONS ................................................................................................. 15 
COR DASHBOARD TILES ............................................................................................... 16 
ABOUT IQ-LEVEL .......................................................................................................... 18 
INITIAL COR CONFIGURATION ............................................................................... 19 
IQ-LEVEL ADJUSTMENT ............................................................................................ 19 
ESSENTIALS OF COR PROGRAMMING ........................................................................... 22 
COR ERRORS AND ALERTS............................................................................................ 24 
COR FALLBACK MODE ................................................................................................... 26 
USING A COR-20 IN STANDALONE MODE ..................................................................... 28 
COR PUMP MAINTENANCE ............................................................................................ 29 
NEPTUNE SYSTEMS LIMITED WARRANTY ..................................................................... 31 
 
 

COR User Guide Page 1

INTRODUCTION

Congratulations on your purchase of the Neptune Systems APEX COR pump!

This Guide is for use by persons who will be using their COR pump in

conjunction with a Neptune Systems APEX controller system. If you will be

using the COR-20 without a Neptune Systems APEX system, refer to the

COR-20 Standalone User Guide found on the Documentation page on the

Neptune Systems web site.

The COR-15 and COR-20 pumps are flow-optimized, energy-efficient variable-speed DC

pumps which are ideal for use as a return pump, closed loop pump, or reactor manifold

pump in saltwater and freshwater aquariums. The COR-series pumps were designed

from the ground up to be tightly integrated with the Neptune Systems APEX family of

aquarium controllers for ease of use and advanced control, however the COR-20 CAN be

operated WITHOUT connecting it to an APEX.

A Neptune Systems APEX controller with a free 1LINK port (provided by either the 1LINK

module or Energy Bar 832) is required to utilize the COR-15; it cannot function as a

standalone pump.

The COR pumps systems are fully compatible with all APEX controller models, including

the APEX (2016), APEX Classic, APEX Gold, APEX Jr, and APEX Lite. The COR is not

compatible with pre-APEX generations of Neptune Systems controllers such as the

AquaController 3 or ACjr.

COR User Guide Page 2

COR FEATURES AND SPECIFICATIONS

❖COR-20: 2000GPH @ 0’, 90w maximum current

❖COR-15: 1500GPH @ 0’, 60w maximum current

❖COR Pump cable length: 9 feet (275cm)

❖Multicolor status LED to indicate the operating state of the pump system and of

any conditions requiring user attention

❖Speed indicator 8-LED bar to visually show the speed for the pump

❖Convenient push buttons to turn the pump on & off, and to activate a feed mode

which may be used during feeding times or during aquarium maintenance periods

❖COR pumps may be used submerged/in-sump or for externally-plumbed

installations

❖2-port AquaBus hub for APEX system interconnection (COR-20)

❖Dedicated 100-watt 24VDC power supply (COR-20)

❖Watertight connectors in the cables between the COR driver and COR pump

❖1LINK port for system interconnection to an APEX system, delivering power and

communications through a single cable (COR-15)

❖Active performance monitoring and error notifications through the APEX and APEX

Fusion

❖Fallback fail-safe setting. If a communication failure occurs between the APEX and

the COR driver, the COR may be configured to revert to a user-configurable

default speed or to turn off.

❖Pump dimensions: 120mm x 98mm x 165mm

COR User Guide Page 3

WHAT’S IN THE BOX

COR-20 Package Contents

The COR-20 package, depicted above, comes with:

❖COR-20 driver

❖COR pump

❖6’ (2m) AquaBus cable for connection to an APEX system

❖100w 24VDC power supply & power cord

❖1-1/4” threaded x 1-1/4” slip union for use on the COR pump output

❖1-1/4” threaded x 3/4” slip fitting for optional hard-piped use on the pump output

❖1-1/2” threaded x 1” slip fitting for optional hard-piped external plumbing

❖O-rings for each fitting (not depicted)

❖5mm hex wrench

Note: the included power supply may be slightly different than the one depicted

The COR-15 package (not depicted) comes with:

❖COR-15 driver

❖COR pump

❖10’ (3m) 4-pin 1LINK male-to-male cable for connection of the COR-15 to an APEX

system via a 1LINK module or EnergyBar 832.

COR User Guide Page 4

❖1-1/4” PVC union for use on the COR pump output

❖1-1/4” threaded x 3/4” slip fitting for optional hard-piped use on the pump output

❖1-1/2” threaded x 1” slip fitting for use on the pump intake when the pump is

plumbed for external use

❖O-rings for each fitting

❖5mm hex wrench

GET TO KNOW YOUR COR DRIVER

The COR-15 and COR-20 driver provides power and speed control to the COR pump.

When connected to an Apex system, the COR driver appears to the Apex as an AquaBus

expansion module, and is managed by the Apex like any other Apex expansion module.

COR Driver Front

COR Driver Back

COR-20 Driver Connections

Pump Speed LEDs

Status LED Panel

Control Buttons

Module Mounting

System

AquaBus Ports

DC Power Jack

1LINK Port

Pump Cable

COR-15 Driver Connections

COR User Guide Page 5

The COR-15 and COR-20 driver may also be referred to as a ‘module’, however, the term

‘driver’ will be used throughout this user guide.

GET TO KNOW YOUR COR PUMP

APEX SYSTEM AOS/FIRMWARE REQUIREMENTS

Your APEX system MUST have a version of firmware installed which contains support for

the COR. The minimum required versions are:

1.5” intake, BSPP

threads

1.25” output,

BSPP threads

Detachable baseplate

with rubber feet

Titanium socket head

screws (4) for disassembly

One screw is not visible in this photo

COR User Guide Page 6

❖APEX (2016) systems must have AOS version 5.03_AB17 or newer.

❖APEX Classic systems must have firmware version 4.53_AB17 or newer.

It is recommended to upgrade your APEX AOS or firmware to the latest available version

even if your APEX currently meets the minimum version requirement.

❖Refer to the APEX (2016) Get Started Guide for instruction about updating the

APEX Operating System to the latest release.

❖Refer to the Firmware Updates page on Neptune Systems’ web site for instructions

and download of APEX Classic firmware.

WARNING: Do not connect your new COR-15 or COR-20 driver to your

APEX system until you have verified that your APEX has the required

minimum firmware version or newer, or have upgraded your APEX if needed.

PHYSICAL INSTALLATION –COR-15 AND COR-20 DRIVER

The COR-15 or COR-20 driver should be securely mounted in a location free from

moisture. The COR driver uses an innovative mounting system which provides safe

secure mounting yet allows easy removal of the COR from the mounting plate. It is

recommended that the COR driver be mounted on a vertical surface such as a wall, an

upright mounting board, or the side or back of your aquarium stand. Use the included

screws to mount the COR driver mounting plate, then slip the COR over the mounting

plate and press downward to firmly seat the COR driver on the mounting plate. If

mounting on drywall, use drywall anchors (screws and anchors not included). A

printable mounting template is available HERE. The mounting template contains

additional mounting guidelines.

❖Be sure to utilize drip loops on all cables plugged into the COR driver.

❖Leave at least 1” of clearance at the top of the COR driver to allow for easy

dismounting of the driver.

❖Leave at least 2.5” of clearance below the COR driver to allow sufficient room for

cabling

WARNING: Water damage will void your COR driver warranty! Mount the

COR driver in a location safe from any form of moisture exposure –drips,

splashes, etc.

COR User Guide Page 7

PHYSICAL INSTALLATION –COR PUMP

The COR pump may be installed for use either submerged (in sump) or externally-

plumbed. An extensive discussion of aquarium plumbing design, PVC plumbing

cementing, etc. is beyond the scope of this user guide; however, some tips and

suggestions are provided here. If you need assistance with plumbing design or

assembly, enlist the help of a local aquarist or an aquarium design, installation, and

maintenance professional.

Submerged/In Sump Installation

It is highly recommended that your return plumbing has 1-1/4” piping and

fittings to obtain the most flow from your COR pump. Smaller diameter piping

will reduce the overall flow of water.

❖If your tank return piping is 1-1/4”, use the included 1-1/4” union.

❖If your tank return piping is 1” diameter, use the included 1-1/4” union and a 1-

1/4” to 1” slip x slip PVC reducer fitting (not included).

❖Do not use the small orange O-ring on the pump if using the 1-1/4” union.

1-1/4” Union Mounted on COR output

❖If your tank return piping is ¾” or smaller, use the smaller 1-1/4” x ¾” slip

adapter and the smaller orange O-ring.

3/4” Slip Adapter Mounted on COR output

❖It is recommended that you install the outer collar part of the 1-1/2” x 1” slip

adapter on the intake threads, as this will provide protection for those threads.

Do not use the inner 1” slip part of the adapter, just use the outer collar.

COR User Guide Page 8

Slip Adapter Collar Mounted on COR Intake

Externally-Plumbed Installation

If you will install your COR external to the sump, use both supplied slip adapter fittings,

or optionally, use the 1-1/2” x 1” slip fitting on the pump intake and the 1-1/4” union on

the pump output. Note that the reduced diameter of these fittings will restrict the flow

through the pump. Optionally, use a 1-1/2” BSPP coupler or union (not supplied) to

connect to larger intake piping. The included orange O-rings must be installed when

using the slip adapter fittings

COR PUMP AND COR DRIVER CONNECTION

To connect the COR pump and driver, simply connect the pump’s cable to the short

pigtail cable of the COR driver. The connectors are keyed; align the connectors

carefully; do not force the connectors together.

Use the outer locking ring of the driver-side connector to tighten the connection and

form a water-resistant seal. The mated and properly tightened connectors are not

intended to be submerged in water.

The COR driver and COR pump cables should be connected prior to connecting power

and APEX cables to the COR driver. If you need to disconnect the COR pump from

the COR driver, COR driver power and APEX connection cables should be

disconnected first, before you disconnect the pump cable.

Alignment slot and key

Outer

Locking Ring

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Neptune Systems Pompe à eau

Neptune Systems

Neptune Systems APEX PMUP Manuel utilisateur

Manuels Pompe à eau populaires d'autres marques

Neptun

Neptun NPHW 5500 Manuel utilisateur

Sensidyne

Sensidyne Gilian BDX-II Instructions d'installation et d'utilisation

Draper

Draper 47808 Manuel utilisateur

Trolla

Trolla 12820 Manuel utilisateur

Sunfab

Sunfab SVH Series Manuel utilisateur

WilTec

WilTec 50740 Manuel utilisateur

Fieldmann

Fieldmann FVC 5015 EK Manuel utilisateur

Everbilt

Everbilt EFSUB5-122HD Manuel utilisateur

Graco

Graco Husky 3300e Manuel utilisateur

esotec

esotec 101018 Manuel utilisateur

moyno

moyno 2000 CC Manuel utilisateur

Becker

Becker BASIC VASF 2.80/1-0.AC230 Manuel utilisateur

Sykes AmeriPumps

Sykes AmeriPumps GP100M Guide de dépannage

DUROMAX

DUROMAX XP WX Series Manuel utilisateur

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Manuel utilisateur

Franklin Electric

Franklin Electric IPS Manuel utilisateur

Xylem

Xylem e-1532 Series Manuel utilisateur

Milton Roy

Milton Roy PRIMEROYAL Manuel utilisateur