Neousys POC-100 Series Manuel utilisateur

POC-100 User’s Manual

Neousys Technology Inc.

POC-100 Series

Ultra-Compact Intel® Atom™ D525 Fanless Controller

User’s Manual

Rev. A3

Published Nov 17

, 2014

POC-100 User’s Manual

Date Description Version

2014/07/01 Correct COM pin define A2

2014/11/17 Change POC-100BK to 100ST A3

POC-100 User’s Manual

Contents

Declaimer.............................................................................................................................5

Declaration of Conformity.............................................................................................5

FCC ...................................................................................................................5

CE......................................................................................................................5

Chapter 1 Introduction ......................................................................................................6

1.1 Overview............................................................................................................6

1.2 Product Specification .........................................................................................7

Specification of POC-100...................................................................................7

Chapter 2 Getting to know your POC-100 ........................................................................9

2.1 Unpacking your POC-100..................................................................................9

2.2 Front Panel I/O Functions................................................................................10

Power Button ...................................................................................................10

Reset Button....................................................................................................11

LED Indicators .................................................................................................11

USB Connectors..............................................................................................12

VGA Connector................................................................................................12

Gigabit Ethernet Port .......................................................................................13

2.2 Back Panel I/O Functions ................................................................................14

USB Connectors..............................................................................................14

Speaker-out Jacks ...........................................................................................14

COM Ports (COM1 & COM2)...........................................................................15

Power Input......................................................................................................16

2.3 Internal I/O Functions.......................................................................................18

Status LED Output...........................................................................................18

Remote On/Off & Reset Control.......................................................................19

PS/2 Keyboard/Mouse.....................................................................................20

Internal USB 2.0 Ports.....................................................................................21

Optional COM Ports (COM3 & COM4).............................................................23

mSATA Socket .................................................................................................24

Mini PCI Express Connector and SIM Socket..................................................25

SATA Connector...............................................................................................26

LVDS Connector, Backlight Control and LVDS Power .....................................27

Internal 5V and 12V DC Power Supply............................................................30

2.4 Mechanical Dimension.....................................................................................31

Top View ..........................................................................................................31

Front View........................................................................................................32

Side View.........................................................................................................32

POC-100 User’s Manual

Bottom View.....................................................................................................33

Chapter 3 Getting Start...................................................................................................34

3.1 Install a 2.5” HDD/SSD on SATA Port..............................................................34

3.2 Install a mSATA SSD on mSATA Port...............................................................36

3.3 Install a Mini-PCIe Module...............................................................................37

3.4 Mount your POC-100.......................................................................................40

3.5 Connect DC power to you POC-100................................................................44

Connect DC power via DC jack........................................................................44

Connect DC power via 2-pin pluggable terminal block (POC-100ST Only)......44

3.6 Power on your POC-100..................................................................................46

To power on POC-100 using the power button on the front panel....................46

To power on POC-100 using an external latched switch (AT-mode)................46

To power on POC-100 using an external non-latched switch (ATX-mode).......48

To power on POC-100 using Wake-on-LAN function.......................................49

Chapter 4 BIOS and Driver.............................................................................................52

4.1 BIOS Settings ..................................................................................................52

COM1 Operating Mode....................................................................................52

COM3 Operating Mode (Optional)...................................................................53

SATA Controller Mode......................................................................................53

IGD Boot Type & LVDS Output Resolution ......................................................54

Power On after Power Failure Option..............................................................56

Wake-on-LAN Option.......................................................................................56

Watchdog Timer for Booting.............................................................................57

Select a Boot Device........................................................................................58

4.2 Operating System Support...............................................................................60

4.3 Driver Installation.............................................................................................61

To install all drivers using “One-Click” driver installation ..................................61

AppendixA Using H/W Watchdog Timer........................................................................62

A.1 Install WDT and DIO Library............................................................................62

A.2 Function Reference..........................................................................................64

InitWDT............................................................................................................64

SetWDT...........................................................................................................64

StartWDT .........................................................................................................65

ResetWDT .......................................................................................................65

StopWDT .........................................................................................................65

POC-100 User’s Manual

Declaimer

This manual is intended to be used as a practical and informative guide only and is subject

to change without prior notice. It does not represent commitment from Neousys Technolgy

Inc. Neousys shall not be liable for direct, indirect, special, incidental, or consequential

damages arising out of the use of the product or documentation, nor for any infringements

upon the rights of third parties, which may result from such use.

Declaration of Conformity

FCC

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to correct

the interference at his own expense.

The product(s) described in this manual complies with all applicable European Union (CE)

directives if it has a CE marking. For computer systems to remain CE compliant, only

CE-compliant parts may be used. Maintaining CE compliance also requires proper cable

and cabling techniques.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this document may be reproduced by any mechanical, electronic, or

other means in any form without prior written permission of the manufacturer.

Company/product names mentioned herein are used for identification purposes only and

are trademarks and/or registered trademarks of their respective companies.

POC-100 User’s Manual

Chapter 1 Introduction

1.1 Overview

Take advantage of the ultra compactness of Neousys’ POC-100 fanless embedded

controller!

POC-100 condenses a complete computer system into the size of a 3.5” hard drive. It

comprises Intel® Atom™ D525 processor, on-board soldered 2GB DDR3, dual GbE ports,

COM ports and USB ports to fit general application requirements. Inside POC-100, there

are SATA port, mSATA socket, mini-PCIe socket and two optional COM ports for further

system configuration.

Reliability is another key advantage of POC-100. Its fan-less and cable-less

mechanical design give POC-100 superior durability, while soldered DDR3 memory offers

exceptional shock/vibration resistance. The aluminum-extrusion heat sink is cautiously

designed to allow a -20 °C to 60 °C operating temperature range.

The compactness of POC-100 introduces a great benefit for deployment. This highly

integrated controller module can be placed and replaced easily in any restricted space.

Compact but delicate with full completion, POC-100 is the fitting “brain” for various

machines and equipments.

POC-100 Series

POC-100 User’s Manual

1.2 Product Specification

Specification of POC-100

System Core

Processor Intel® Atom™ D525 1.8GHz dual-core processor

Chipset Intel® ICH8-M I/O Control Hub

Graphics Integrated Intel® GMA 3150 graphics

Memory On-board soldered 2GB DDR3 800MHz SDRAM

Panel I/O Interface

Ethernet 2x Gigabit Ethernet ports by Intel® I210

Video Port 1x DB-15 connector for analog RGB, supporting 2048 x 1536 resolution

Serial Port 1x software-programmable RS-232/422/485 (COM1)

1x RS-232 (COM2)

USB 3x USB 2.0 ports

Audio 1x Speaker-out

Internal I/O Interface

Serial Port 1x optioanl software-programmable RS-232/422/485 (COM3)

1x optional RS-232 (COM4)

Mini-PCIe 1x mini PCI Express slot with SIM socket

LVDS 1x 18-bit LVDS output with backlight control, supporting up to 1366 x 768 resolution

Storage Interface

SATA HDD 1x SATA ports with 2.5” HDD/SSD bracket

mSATA 1x mSATA socket

Power Supply

DC Input Built-in 8~25 VDC DC input

Input Connector 1x 2-pin pluggable terminal block for DC input (POC-100ST)

1x DC jack (ø2.5) for AC/DC adapter input (POC-100RK)

Power Consumption

Typical: 11.6W (0.97A @ 12V)

Full-loading: 14.6W (1.22A @ 12V) *

Mechanical

Dimension 149 mm (W) x 105 mm (H) x 44 mm (D)

Weight 1.0 kg (with one 2.5” SATA HDD)

Mounting Wall-mounting (standard) or DIN-rail mounting (optional)

Environmental

Operating

Temperature

-20°C ~ 60°C with SSD or mSATA, 100% CPU loading **/***

-10°C ~ 50°C with HDD, 100% CPU loading **/***

POC-100 User’s Manual

Storage

Temperature -40°C ~85°C

Humidity 10%~90% , non-condensing

Vibration Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, w/o add-on card, according to

Shock Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, w/o add-on card, according

to IEC60068-2-27)

EMC CE/FCC Class A, according to EN 55022 & EN 55024

* Full-loading power consumption is measured with 2GB DDR3 memory and one 2.5” SATA HDD installed under the

following conditions:

-100% loading for Atom D525 CPU

-100% loading for 3D graphics

-100% loading for GbE port

** The CPU loading is applied using Intel® Thermal Analysis Tool. For detail testing criteria, please contact Neousys

Technology

*** For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required.

POC-100 User’s Manual

Chapter 2 Getting to know your POC-100

2.1 Unpacking your POC-100

When you receive the package of POC-100 series, please check immediately if the

package contains all the items listed in the following table. If any item is missing or

damaged, please contact your local dealer or Neousys Technology Inc. for further

assistance.

Item

Description Qty

1 POC-100ST or POC-100RK ultra-compact fanless controller

(According to the configuration you order, your POC-100 may contain

SATA HDD or mSATA module. Please verify these items if necessary.)

2 Neousys Drivers & Utilities DVD 1

3 Screw package 1

POC-100 User’s Manual

2.2 Front Panel I/O Functions

On POC-100, we design all general-purpose I/O functions on the front panel so you can

easily access them. In this section, we’ll illustrate each I/O function on the front panel.

Power Button

The power button is a non-latched switch for ATX mode on/off operation. To turn on the

POC-100, press the power button and the PWR LED on the left-top side is lighted up. To

turn off the POC-100, you can either issue a shutdown command in OS, or just simply press

the power button. In case of system halts, you can press and hold the power button for 5

seconds to compulsorily shut down the system. Please note that a 5 seconds interval is

kept by the system between two on/off operations (i.e. once turning off the system, you

shall wait for 5 seconds to initiate another power-on operation).

Table des matières

Autres manuels Neousys Ordinateur de bureau

Neousys

Neousys Nuvo-7160GC Series Manuel utilisateur

Neousys

Neousys NRU-220S Series Manuel utilisateur

Neousys

Neousys Nuvo-9100VTC Series Manuel utilisateur

Manuels Ordinateur de bureau populaires d'autres marques

HP m9060n - Pavilion - Elite Fiche technique

Asus

Asus E210 Series Manuel utilisateur

Dell

Dell Inspiron 600m Manuel utilisateur

Dell

Dell Inspiron 3662 Manuel utilisateur

TotalFlow

TotalFlow uFLO Manuel utilisateur

HP Presario SV7000 - Desktop PC Manuel utilisateur

HP ProDesk 400 G5 Manuel

Logitech

Logitech MK320 Manuel utilisateur

Dell

Dell XPS 730 H2C Manuel utilisateur

Sony

Sony Vaio Series Manuel utilisateur

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Manuel utilisateur

Alto

Alto MD 250 Manuel utilisateur

Lenovo

Lenovo ThinkCentre Edge 72 Manuel

Lenovo

Lenovo ThinkStation D20 Manuel

Arbor Technology

Arbor Technology FPC-7800 Series Manuel utilisateur

Sony

Sony VAIO VGX-TP1 Series Manuel utilisateur

Asus

Asus Eee Box B204 Manuel utilisateur

Dell

Dell Optiplex 9010 All In One Manuel utilisateur