Neomatica ADM35 Manuel utilisateur

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

This Operation manual relates to the wireless multifunctional sensor ADM35 (hereinafter

referred to as sensor) and wireless multifunctional sensor ADM35H (hereinafter referred to as

sensor). The manual describes sensor operation, procedure of its installation and its integration

with the monitoring system using the related tracker from the devices manufactured by Neomatica

LLC.

The Operation manual is designed for professionals who have familiarized themselves with

the rules of repair and installation works execution in vehicles and who have special professional

knowledge in electronic and electric equipment used on various transport means.

Sensor proper work can be guaranteed if it is installed and set by qualified professionals. To

use the sensor properly it is necessary to familiarize with the monitoring system work principles in

general and to understand the function of all its components

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021 
3
Content 
Application..................................................................................................................................................4 
Technical features ..............................................................................................................................4 
1 Technical features of ADM35........................................................................................................5 
2 Technical features of ADM35H.....................................................................................................6 
Design and Operation of the System .........................................................................................7 
Installation and Setting ....................................................................................................................7 
1 Preparation and installation process............................................................................................7 
1.1 Preparation for operation.....................................................................................................7 
1.2 Installation..............................................................................................................................7 
1.3 Setting....................................................................................................................................8 
2 «ADM BLE-Configurator»..............................................................................................................9 
2.1 View of the readings in «ADM BLE-Configurator» application ..................................10 
2.2 Sensor setting in «ADM BLE-Configurator» application ..............................................10 
2.3 Report generation in «ADM BLE-Configurator» application........................................12 
2.4 Firmware update of the sensor ........................................................................................13 
3 Using the sensor together with the trackers АDM007 and ADM333, that contains BLE 
interface.................................................................................................................................................13 
3.1 Method of sensors catching..............................................................................................13 
3.2 Manual adding of sensors and checking the list of the sensors added.....................14 
3.3 Adding sensors automatically...........................................................................................14 
3.4 Adding sensors with the help of commands ..................................................................15 
3.5 Getting information from the sensors caught.................................................................15 
Storage and Transportation..........................................................................................................16 
Warranty ................................................................................................................................................16 
Marking and Packaging..........................................................................................................................17 
Disposal....................................................................................................................................................17 
Scope of supply.......................................................................................................................................17 
Acceptance certificate ..................................................................................................................17 
Annex A. Sensor usage with Teltonika FMB trackers ..........................................................................18 
Annex В. Instructions for setting up the sensor via «nRF Connect» application .............................21 
 
 
 
 
 
 
 
 

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

1 Application

The sensor is used for being installed on moving and stationary objects to measure

temperature, illumination and humidity (only for ADM35H), presence of magnetic field.

2 Technical features

The ADM35 model (figure 1) measures temperature more accurately, its temperature

measuring element has higher protection from moisture, but the model does not contain a

measuring element to measure the level of relative humidity.

Figure. 1 - View of the sensor

The ADM35H (figure 2) model contains a measuring element that measures relative

humidity level, but the accuracy of temperature measurement is less than that of ADM35.

Figure. 2 - View of the sensor

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

2.1 Technical features of ADM35

•Operating temperature: from - 40°С up to + 85°С;

•Margin of error for temperature measurement: ±0,3°С;

•Range of illumination measured: 0,01 lux... 83000 lux;

•Type of Hall detector: discrete, omnipolar;

•Frequency range of radio interface: 2400..2483,5 МHz;

•Transmitter power: up to +8 dBm;

•Receiver sensitivity: -96 dBm;

•Data exchange technology: Bluetooth Low Energy (BLE),

Bluetooth Low Energy Long Range (BLE Long Range);

•Coverage in the mode of BLE: up to 100 m in line-of-sight;

•Coverage in the mode of BLE Long Range: up to 500 m in line-of-sght;

•Number of stored records: 19700;

•Battery: ER14505 3,6V 2700 mА/h;

•Operation time with one battery: up to 3 years;

•Housing: IP65;

•Housing materials: polycarbonate;

•Material of detector: stainless steel;

•Dimensions, mm, not more than: 129 (73 without detector) x 68 x 32;

•Mounting seat size, mm, not more than: 73 x 68;

•Weight: nor more than 105 g

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

2.2 Technical features of ADM35H

•Operating temperature: from - 40°С up to + 85°С;

•Measurement error of temperature:

±0,4°С (in the range of -10°С up to +85°С),

±0,9°С (in the range of -40°С up to -10°С);

•Range of relative humidity measurement: 0%..100% without moisture condensation;

•Measurement error of relative humidity at ambient temperature of +30°С:

±4% (in the range of 0% up to 80%),

±6,5% (in the range of 80% up to 100%);

•Range of illumination measured: 0,01 lux..83000 lux;

•Type of Hall detector: discrete, omnipolar;

•Frequency range of radio interface: 2400..2483,5 МHz;

•Transmitter power: up to +8 dBm;

•Receiver sensitivity: -96 dBm;

•Data exchange technology: Bluetooth Low Energy (BLE),

Bluetooth Low Energy Long Range (BLE Long Range);

•Coverage in the mode of BLE: up to 100 m in the line-of-sight;

•Coverage in the mode of BLE Long Range: up to 500 m in the line-of-sight;

•Number of stored records: 19700;

•Battery: ER14505 3,6V 2700 mА/h;

•Operation time with one battery: up to 3 years;

•Housing: IP65;

•Housing materials: polycarbonate;

•Detector cover material: ABS plastic;

•Dimensions, mm, not more than: 124 (73 without detector) x 68 x 32;

•Mounting seat size, mm, not more than: 73 x 68;

•Weight: not more than 105 g

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

3 Design and Operation of the System

The sensor contains a temperature measuring element, a humidity measuring element (only

for ADM35H), an illumination measuring element, Hall detector, a microcontroller with integrated

radio interface Bluetooth Low Energy (hereinafter referred to as BLE). Power supply to the sensor

is made with a battery ER14505. The values measured are available in real time via radio channel

using BLE technology and are stored with a set frequency in the non-volatile memory of the sensor

with the possibility of their subsequent unloading.

4 Installation and Setting

4.1 Preparation and installation process

4.1.1 Preparation for operation

The sensor is supplied switched on and ready for operation. If the battery was removed,

install it, observing the polarity. 30 seconds after the power supply, the sensor will be ready for

use.

4.1.2 Installation

The sensor is fixed on a flat metal surface with the help of the magnets included in the

delivery set. On other surfaces the sensor is fixed with the help of screws with a press washer or

on a double-sided adhesive tape, which must correspond to the operating conditions of the sensor.

If you need to fasten more tightly, the methods listed above can be combined.

The transparent lid of the sensor should be clean. Impurities present on the sensor lid or

housing or detector cover may result in decrease in precision when measuring temperature and

illumination. It is not allowed to use abrasive cleaning agents or organic solvents for cleaning the

sensor housing.

It is important to avoid the sensor installation near large metallic elements, since the

coverage for data transmission via BLE may be reduced. The sensor must be oriented with the

BLE antenna towards the tracker. Before the final fixing of the sensor and the tracker, it is

necessary to make sure that the signal level is sufficient for stable operation.

The signal strength is checked at the receiving device side (tracker or Android smartphone).

The signal strength of the last readings can be viewed in the Windows version of the tracker

configurator, or in the response to the BLESENSORINFO command (see section 4.3.4 for the

description of the command). You can also use the Android application "ADM BLE-Configurator"

(for a description, see section 4.2.1).

The signal level of -100 dBm is considered as critically low, at this level it is recommended

to change the installation location. The signal level of -70 dBm is considered as normal for stable

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

operation. The signal strength from -85 dBm up to 90 dBm is considered as sufficient for operation,

but problems may occur at a slight deterioration of conditions.

4.1.3 Setting

The sensor is supplied with optimal factory settings. If the factory settings are suitable for

the task, no sensor configuration is required. You can immediately connect the sensor to the

tracker.

By default, the data transfer period is set to 15 seconds and all sensors are active, except

for the Hall sensor. If you need to use a Hall sensor, you should enable the corresponding option.

Recording to the archive is disabled by default, to use this function, you should enable the

corresponding option and configure the frequency of recording to the archive.

The readings of all active sensors are recorded in the archive.

Main sensor parameters available for configuration:

•Mode of data transfer

This parameter determines the technology via which the data will be transmitted. Bluetooth

Long Range technology allows increasing the distance from the sensor to the receiving device and

to increase the reliability. The receiving device should support data receipt via such technology.

BLE technology allows transferring data over shorter distances. Such a technology is

supported by most devices. Mode BLE is given by default.

•Data tranmission period

This parameter determines transmission frequency of the data via the Bluetooth LE radio

channel, as well as the frequency of measurements. The measurement is performed by all active

detectors before sending the readings. In the intervals between the measurement and sending

readings, the sensor is in a sleep mode.

Increase of the transmission period extends the battery life, but reduces the frequency of

readings update, and also increases the time switch to the setting mode. By reducing this

parameter you decrease the battery life. The recommended value is 15 seconds.

•Hall sensor

Activation / deactivation of the Hall sensor

It is recommended to activate this sensor only when it is necessary to use it, because its

activation leads to an increase in energy consumption. When the Hall sensor is activated, an

extraordinary exit from the sleep state and sending readings may happen.

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

•Archive

Activation/deactivation of recording sensor readings into the archive. The readings from all

active measuring elements are recorded in the archive with reference to a time point. Enabling or

disabling this option does not affect the data transmission mode via the Bluetooth LE radio

channel, but its activation leads to a reduction of the battery life.

Other parameters are described in clause 4.2.2.

4.2 «ADM BLE-Configurator»

«ADM BLE-Сonfigurator»application is available in Google Play.

To work with the application, you need the permission of the «Geolocation»or «Location».

This is due to Google requirements for applications that provide data exchange with BLE devices,

since BLE technology includes positioning by BLE beacons. You also need permission for the

access of photos, media and files because this is used when updating the sensor software,

working with the archive and other operations that require interaction with the smartphone

memory.

The Android application «ADM BLE-Сonfigurator»performs the following functions •

•viewing readings in real time;

•sensor setup;

•data download from the archive;

•generating of report in the form of a table.

Using the application, you can solve the following tasks:

•sensor checking;

•view of the current sensor readings;

•assessment of the signal level when passing through obstacles;

•assessment of the battery status;

•determination of the sensor address;

•determination of the sensor firmware version.

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021

4.2.1 View of the readings in «ADM BLE-Configurator»application

•Launch «ADM BLE-Configurator» application.

•Make sure that the application has been given all the necessary permissions.

For correct operation, you need not only to permit the use of the «Geolocation»or

«Location», but also to enable this function if it is disabled.

•The sensor will be found as soon as it sends another message with readings.

The following

parameters are available for

viewing:

•Sensor model;

•Sensor MAC-address;

•Temperature;

•Illumination;

•Humidity (only for

ADM35H);

•Hall element;

•Battery voltage;

•Firmware version;

•RSSI –level of received radio signal;

•The time passed since the last data message was received;

•LR-data received by Bluetooth Long Range technology

•Archive status.

This section presents the most complete set of data. It may differ depending on the firmware

version of the sensor, as well as on its modification.

4.2.2 Sensor setting in «ADM BLE-Configurator»application

To view or change the sensor settings, wait until it is detected and click on the icon to

go to the «Control»menu.

Description of the parameters in «Control»menu:

•Archive.

•When the «Archive»option is active, readings are recorded at a set frequency. The

readings of all active sensors are recorded in the archive with reference to time.

Ce manuel convient aux modèles suivants

Table des matières

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur