THE RAIN SENSOR IS NOT FACTORY-PROGRAMMED (ASSOCIATED).
First follow the instructions provided below concerning the specific operation of the machines
you would like to control, then those of the actuator to be controlled (KATO ADV RADIO).
10.1. Saving the rain sensor on KATO ADV RADIO
The NRS1R rain sensor, as soon as it senses the presence of rain, transmits a unique signal
at the radio frequency 433.92 MHz. The NRS1R rain sensor can be used to control several
actuators, as long as the sensor is associated with the various KATO ADV RADIO actuators
and thus a window, with the procedure described below.
The encoding used varies for each channel, so each transmission will send a signal that is different
from all the others. It follows that the receiver must be able to recognize the enabled transmitters,
thus the transmission codes should be saved following the procedure below:
Equip yourself with the NRS1R radio rain sensor, checking beforehand that it is working
and is powered properly (Blue LED flashing).
On the KATO ADV RADIO actuator, briefly press (for about 1 second) the small “PRG”
button located near the terminal block. The slowly flashing LED indicates that it is waiting
to receive a valid radio code.
Within 10 seconds, place the palm of your hand on the rain sensor (on the grey circular
zone) waiting for the Red LED rain indicator to start flashing.
If the code is saved correctly, the LED on the KATO ADV RADIO actuator will emit one
long flash (1 sec.) as confirmation; then the LED will go out and remain at rest.
If the code is not saved correctly - due to the memory being full, for example, or the
sensor being incompatible - the LED on the KATO ADV RADIO actuator will emit a series
of quick flashes for about 1 second; then the LED will go out and remain at rest.
11. ENVIRONMENTAL PROTECTION
All materials used in the manufacture of this appliance are recyclable.
We recommend that the device itself, and any accessories, packaging, etc. be sent to a
centre for ecological recycling as established from laws in force on recycling.
The device is mainly made from the following materials:
Iron Aluminium Cuprum Zinc Silicon Plastic of various type
Dispose materials in conformity with local regulations about removal.
12. RECALL TO MAIN PRINCIPLES OF WARRANTY CERTIFICATE
The manufacturer will guarantee good function of the appliance. The manufacturer shall
undertake to replace defective parts due to poor quality materials or manufacturing defects. The
guarantee covers products and individual parts for 2 years from the date of purchase. The latter
is valid as long as the purchaser possesses proof of purchase and completion of all agreed
conditions of payment. Guarantee of good function of appliances agreed by the manufacturer
implies that the latter undertakes to repair or replace free of charge and in the shortest period
possible any parts that break while under warranty. The purchaser is not entitled to any
reimbursement for eventual direct or indirect damage or other expenses incurred. Attempt to
repair by personnel unauthorised by the manufacture shall render the warranty null and invalid.
The warranty does not cover fragile parts or parts subject to natural wear and tear or corrosion,
overload, however temporary etc. The manufacturer will accept no responsibility for eventual
damage incurred by erroneous assembly, manoeuvre or insertion, excessive stress or inexpert
use. Repairs performed under guarantee are always "ex-factory of the manufacturer".
Respective transport expenses (out/back) are the responsibility of the purchaser.
8
13. DECLARATION OF CONFORMITY
The undersigned,
Company name: NEKOS S.r.l
Postal address: Via Capitoni, 7/5
Postcode and city:
36064 Mason Vicentino VI
Telephone number: +39 0424 411011
declare that the document is issued under our sole responsibility and belongs to the following product:
Apparatus model / Product: Heated rain sensor NRS1 – NRS1/R
Trademark: NEKOS
Model/Type: NRS1 – NRS1/R
Batch: see data label
Serial number: see data label
The object of the declaration described above is in conformity with the relevant Union harmonisation legislation:
2014/30/EU ElectroMagnetic Compatibility Directive (EMCD)
2014/35/EU Low Voltage Directive (LVD)
2014/53/EU Radio Equipment (RED)
2011/65/EU Restriction of the use of certain hazardous substances Directive (RoHS Directive)
The following harmonised standards and/or technical specifications have been applied:
EMC:
EN 61000-6-3:2007 + A1:2011
EN 61000-6-2:2005 + AC:2005
LVD
EN 60335-1:2012 + EN 60335-1/A11:2014
RED
ETSI EN 300 220-1 V3.1.1 – ETSI EN 300 220-2 V3.1.1
ETSI EN 301 489-1 V2.1.1 – ETSI EN 301 489-3 V2.1.1
RoHS
EN 50581:2012
Place: Mason Vicentino
Date: 13/06/2017
Signature: Giuliano Galliazzo (A.D. – President)
NEKOS S.r.l. - Via Capitoni, 7/5
36064 Mason Vicentino (VI) – ITALY
+39 0424 411011 – +39 0424 411013
