NEIL CAMPER 2023 Caractéristiques techniques
CONTACT INFORMATION
0800-222-0177 vent[email protected]om.ar www.neil.com.ar
USE AND INSTALLATION MANUAL
2023
USER MANUAL - CAMPER
INDEX
DECLARATION OF CONFORMITY. . . . . . . . . . . . . . . . . . . 2
UPDATED DIGITAL CONTENT . . . . . . . . . . . . . . . . . . . . . . 3
WARRANTY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . .5
EXPLODED VIEW. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
INSTALLATION SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . 6
PREVENTIVE MAINTENANCE. . . . . . . . . . . . . . . . . . . . . . 10
SOLUTIONS FOR LOW-PERFORMANCES. . . . . . . . . . . . 11
F.A.Q . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
WATER TANK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
EXTERNAL MEASUREMENTS . . . . . . . . . . . . . . . . . . . . . . 13
DEVICE/CONTROLLER FEATURES . . . . . . . . . . . . . . . . . 14
INDEX
DEVICE/CONTROLLER FEATURES . . . . . . . . . . . . . . . . . 14
USER MANUAL - CAMPER
DECLARACIÓN DE CONFORMIDAD
COMFORT SDN S.A., con domicilio social en Av. Bicentenario N° 459, Merlo, Buenos
Aires, Argentina, como fabricante de equipos enfriadores evaporativos para
vehículos marca Neil.
DECLARA: Que los equipos diseñados y fabricados por COMFORT SDN S.A. bajo las
especificaciones técnicas necesarias, una vez instalados en los vehículos, de
acuerdo a las instrucciones de montaje que lo acompañan , cumplen con las
directivas Europeas de nuevo enfoque sobre:
a) Compatibilidad Electromagnética: 72/245/CEE , 2006/28/CE
b) Bajo Voltaje: 72/23 EEC
c) Otros: 2011/65/EU
Que garantizan la seguridad de personas y bienes durante su instalación y
funcionamiento.
Buenos Aires, febrero de 2020
Lic. Neil Sebastian
Presidente Comfort SDN S.A.
DECLARATION OF CONFORMITY
COMFORT SDN S.A., with registered office at Av. Bicentenario N ° 459, Merlo,
Buenos Aires, Argentina, as a manufacturer of Neil brand evaporative cooling
equipment for vehicles.
DECLARES: That the equipment designed and manufactured by COMFORT SDN
S.A. under the necessary technical specifications, once installed in the vehicles,
according to the accompanying assembly instructions, they comply with the new
approach European directives on:´
a) Electromagnetic compatibility: 72/245/CEE , 2006/28/CE
b) Low voltage: 72/23 EEC
c) Others: 2011/65/EU
They guarantee the safety of people and goods during their installation and
operation.
Buenos Aires, February 2020
Lic. Neil Sebastian
Presidente Comfort SDN S.A.
DICHIARAZIONE DI CONFORMITÀ
COMFORT SDN S.A., con sede legale in Av. Bicentenario N ° 459, Merlo, Buenos
Aires, Argentina, come produttore di apparecchiature di raffreddamento evapora-
tivo a marchio Neil per veicoli.
DICHIARA: Che l'apparecchiatura progettata e prodotta da COMFORT SDN S.A.
secondo le specifiche tecniche necessarie, una volta installati sui veicoli, secondo le
istruzioni di montaggio allegate, si conformano al nuovo approccio delle direttive
europee su:
a) Compatibilità elettromagnetica: 72/245/CEE , 2006/28/CE
b) Basso voltaggio: 72/23 EEC
C) Altri: 2011/65/EU
Garantiscono la sicurezza di persone e merci durante l'installazione e il
funzionamento.
Buenos Aires, Febbraio 2020
Lic. Neil Sebastian
Presidente Comfort SDN S.A.
DECLARAÇÃO DE CONFORMIDADE
COMFORT SDN S.A., com sede na Av. Bicentenario N ° 459, Merlo, Buenos Aires,
Argentina, como fabricante de equipamentos de refrigeração por evaporação para
veículos da marca Neil.
DECLARA: Que o equipamento projetado e fabricado pela COMFORT SDN S.A. de
acordo com as especificações técnicas necessárias, uma vez instaladas nos
veículos, de acordo com as instruções de montagem que as acompanham,
cumprem a nova abordagem das diretivas européias sobre:
a) Compatibilidade eletromagnética: 72/245/CEE , 2006/28/CE
b) Baixa voltagem: 72/23 EEC
c) Outras: 2011/65/EU
Eles garantem a segurança de pessoas e mercadorias durante sua instalação e
operação.
Buenos Aires, febrero de 2020
Lic. Neil Sebastian
Presidente Comfort SDN S.A.
2
USER MANUAL - CAMPER
UPDATED DIGITAL CONTENT
Visit our website and find all the updated information about the installation and
maintenance of your Neil Evaporative Cooler.
https://neil.com.ar/en/technical-support/
You can find tutorial
videos about how you
can install the Evaporati-
ve Cooler in our website:
Access the maintenance
section in the website to
diagnose and fix any
technical problem:
Download the last ver-
sion of the manual in the
following link:
You can also find technical information about our products in other languages
Spanish Italiano Français Português Deutsche
neil.com.ar neil.com.ar/it neil.com.ar/fr neil.com.ar/po neil.com.ar/ge
3
USER MANUAL - CAMPER
WARRANTY
COMFORT SDN S.A., guarantees the devices in case of verified faulty materials or
manufacture of our Evaporative Coolers
COMFORT SDN S.A., will repair or replace based on its own technical criteria, the
faulty components or parts.
This warranty does not include the intentional or accidental damages caused by
inappropriate or incorrect use, and/or by modifications in the installation instruc-
tions and/or by changes in the specific materials of the product, and/or by any
other cause that is not attributable to the materials quality and/or manufacture
defect mentioned. As water pumps durability depend on the previous maintenan-
ce made by the user (periodic cleaning of the Evaporative Cooler) they are not co-
vered by the warranty.
Expenses outside the factory building by labor, shipping, packaging, transport or
products insurance and/or its parts to repair or replace by COMFORT SDN S.A., will
be charged to the customer
This warranty expires automatically 2 (two) years after the purchase.
CUSTOMER NAME:
SERIAL NUMBER OF THE EVAPORATIVE COOLER:
INSTALLATION DATE:
INSTALLED VEHICLE:
SELLER/INSTALLER:
KEEP THIS MANUAL TO MAINTAIN YOUR WARRANTY COVERAGE.
The warranty must be validated by the seller and/or the customer in the following link:
https://neil.com.ar/en/warranty/
SERIAL NUMBER
4
VERY IMPORTANT
Disconnect the terminals (-) and (+) from
the battery when welding on the vehicle.
USER MANUAL - CAMPER
5
Irrigation tube
Condensate Pump Filter
Level sensors
Humidification
pump filter
Pre-cooling chamber lid
Universal base
Telescopic
bars
Universal frame
Control Panel
Cover
Evaporator
filter
Pre-cooling
chamber lid
Electro
fan
Control panel fixing screws
Negative black
cable (thick)
Positive red
cable (thick)
Negative black
cable (thin)
Positive red
cable (thin)
Water pump to the water
tank
Condensate Pump Filter
The electrical pump is
submersible and can be
placed inside the water tank
Fuse holder and fuse
+
Hose with electrical and
hydraulic connection
USER MANUAL - CAMPER
INSTALLATION SEQUENCE
PREPARING THE VEHICLE ROOF
A- ROOFS WITHOUT SUNROOFS:
When a choice is possible on where to perforate the roof, it is recommended to do
it on the driver seat line, as air distribution is optimal here. (IT IS ALWAYS MORE
EFFECTIVE TO GET COOL AIR FROM THE FRONT).
After defining the best spot, perforate a hole of 430 mm x 310 mm, forming the
radius with 30 mm radius. Then bend the metal upwards to give rigidity. (Approxi-
mately height 10mm all around the perimeter).
Put the weatherstrip all around the rectangular hole of 600 mm x 400 mm, taking
care that the upper surface be in a horizontal plane to obtain the right sustain of
the base of the Evaporative Cooler and prevent water and air from getting into the
cabin.
In case of a roof with gutters, they must be filled with a rubber or thin weatherstrip.
Once the roof is leveled, the self-adhesive weatherstrip included in the package
must be installed.
Place the neutral siliconized sealant on the weatherstrip and in the internal perime-
ter before placing the device.
You can find tutorial videos about how to correctly cut
the roof and also download the “roof cutting template”
in the following link:
https://neil.com.ar/en/installation-tutorials/
6
NO YES
Incorrect Correct
USER MANUAL - CAMPER
Set the device in the roof hole, center it and adjust the telescopic support bars as
shown in the following image:
The 4 stud screw must be adjusted in a cross and even way until making sure the
weatherstrip starts being pressed against the base, preventing water and air from
entering.
ADJUST THE DEVICE TO THE ROOF
B- ROOF WITH SUNROOF:
- Remove the sunroof
- If the sunroof frame doesn’t have a weatherstrip, put one all around the peri-
meter to obtain the correct support for the device base.
- Put neutral siliconized sealant on the weatherstrip before placing the device.
UNIVERSAL TELESCOPIC SUPPORT BARS:
PARTS OF EACH ROD
You can find tutorial videos about how to correctly
adjust the Neil Evaporative Cooler in the following link:
https://neil.com.ar/en/installation-tutorials/
7
USER MANUAL - CAMPER
With the Evaporative Cooler firmly adjusted to the roof, place the external frame
and the control panel. Before adjusting all the control panel screws, the electrical
connection with its corresponding fuses must be correctly connected. In case of an
internal hose installation, the electrical and hydraulic connection must be installed
before adjusting the screws.
FRAME AND CONTROL PANEL SETUP
The Evaporative Cooler must NOT be installed with a negative tilt
IF NEEDED, THE DEVICE CAN BE INSTALLED WITH
THE FRONT PART FACING THE BACK OF THE VEHICLE
Correct up to 22 degrees Acceptable Incorrect
Adjustable
stud screws
Internal Frame
Fixing screws of
the Control panel
Weatherstrip
Control panel
Telescopic
support bars
Washer, nut
and locknut
8
USER MANUAL - CAMPER
In vehicles where the water tank is placed inside the cabin, or a pre-existing water
tank is used, it is recommended to use an internal electrical and hydraulic connec-
tion.
ALL THE EVAPORATIVE COOLERS INCLUDE BOTH OPTIONS OF CONNECTION
(external and internal)
MOTORHOMES
INSTALLATION WITH INTERNAL HOSE
External
electrical
and
hydraulic
connection
ROOF
INTERNAL
HYDRAULIC
CONNECTION
INTERIOR OF
THE VEHICLE
BOMBA
REPOSITORA
GOMA DE
ACOPLE
AGUJERO
DE 9 mm
Positive red
cable (thick)
Negative
black cable
Cables
finos DEPÓSITO DE
AGUA NO
INCLUÍDO
BATTERY
The brushless pump is submersible
so this can be placed inside
the water tank. This can also
be placed in the exterior making
a small hole and using a rubber.
WATER TANK
NOT INCLUDED
You can find detailed information and tutorial videos
about how to install the Evaporative Cooler in a Motor-
home in the following link:
https://neil.com.ar/en/installation-tutorials/
9
INTERNAL
ELECTRICAL
CONNECTION
Table des matières
Manuels Matériel de camping populaires d'autres marques
Illuminator
Illuminator 5 Bar Camp Light Kit Manuel utilisateur
Ozark Trail
Ozark Trail WMT-8859 Manuel utilisateur
Buck
Buck Flashpoint 770 Manuel utilisateur
Snow Peak
Snow Peak Pack & Carry Fireplace XL Manuel utilisateur
Asaklitt
Asaklitt 31-1171 Manuel utilisateur
Petromax
Petromax h-mortar Manuel utilisateur
