NEC SV8500 Manuel utilisateur

FP85-104 S1E

Operations and Maintenance Manual

NWA-041693-001

ISSUE 2.0

Stock # 439TBA

To view the latest issue of this document go to NEC Knowledgebase @ http://www.kbase.cns.nec.com.au & search for NEC-10789

LIABILITY DISCLAIMER

NEC Australia Pty Ltd. reserves the right to change product specifications,

functions, or features, at any time, without notice.

Periodically changes are made to the information contained in this manual.

Although all efforts have been made to ensure that the contents are correct,

NEC shall not be liable for any direct, indirect, consequential or incidental

damages resulting from the use of the equipment, manual or any related

materials.

Should you find any error, NEC welcomes your comments. Please contact

NEC on 1800 819 766.

NEC Australia Pty Ltd. has prepared this document for use by its

employees and customers. The information contained herein is the

property of NEC Australia Pty Ltd. and shall not be reproduced without

prior written approval from NEC AustraliaPty Ltd.

REFERENCES

This document may contain references to models, features and specifications

marketed in other countries and may not be applicable to the Australian and

New Zealand markets. Please contact your system representative for details.

The related Service/Technical Information Bulletin should be read in

conjunction with this document.

TRADE MARKS

Dterm is a registered trademark of NEC Corporation. ElectraMail and Electra

Elite are registered trademarks of NEC America, inc. PCPro is a trademark of

NEC Corporation. UNIVERGE is a trademark of NEC Corporation.

This document may include references to other brand and product names that

are trademarks or registered trademarks which belong to the respective

trademark owner.

NEC Australia Pty Ltd.

Printed in Australia

Note: This disclaimer also applies to all related documents previously published.

LIABILITY DISCLAIMER

NEC Infrontia Corporation reserves the right to change the specifica-

tions, functions, or features, at any time, without notice.

NEC Infrontia Corporation has prepared this document for use by its

employees and customers. The information contained herein is the

property of NEC Infrontia Corporation, and shall not be reproduced

without prior written approval from NEC Infrontia Corporation.

All brand names and product names on this document are trade-

marks or registered trademarks of their respective companies.

NEC Infrontia Corporation

PL- 1

PRODUCT LIABILITY

1. USING THE EQUIPMENT SAFELY

The following safety information describes how to avoid injuries while working with the equipment and how to

prevent damage to the equipment. Learn the meaning of the following symbols and then read this section

carefully before using the equipment.

SYMBOL DESCRIPTION

DANGER

Incorrect use of the equipment may cause personal injury or death.

WARNING

Incorrect use of the equipment may cause personal injury or a serious

system fault.

ATTENTION

Incorrect use of the equipment may limit the system performance or

cause the system to fail.

The telephone system can only be used in NEC-designated countries.

If a system-down, malfunction, defect or external factor such as an electrical failure indirectly causes a loss of profit, the

company (or affiliates) will not be held responsible.

The goal is to produce a comprehensive and accurate manual. However, if errors or omissions are found in this manual,

please notify NEC Infrontia Corporation.

If the system requires installation or repair, contact the dealer or its service technician.

Carefully read all the manuals that relate to the system.

PL- 2

PRODUCT LIABILITY

2. SAFETY CONSIDERATIONS

The following describes the safety considerations that must be observed before using the system, the power-

related equipment and the peripheral equipment, such as consoles, the Main Distribution Frame (MDF),

telephones, PCs, printers, etc.

DANGER

If the system emits smoke or a burning, acrid odor, immediately turn off the system power.

Operating the system in this state might cause a fire, an electrical shock, or a system failure. After

turning off the power and confirming that the smoke has disappeared, contact the dealer.

If any equipment, such as the system, the main power source, a cabinet or peripheral equipment tips

over, turn off the power and contact the dealer.

If liquid reaches the inside of the system or the main power source, turn off the power. Operating

the system in this state might cause a fire, an electrical shock, or a system failure.

Do not touch the internal parts of the main power source to disassemble or configure it. This action

may cause a fire, an electrical shock or a system failure.

NEC Infrontia Corporation does not take any responsibility for disassembled or reconfigured

equipment.

Do not put any container objects (such as a vase or a cup) on the main power source or any

peripheral equipment. It might cause a fire, an electrical shock or a system failure.

Do not tamper with, modify, forcefully bend, forcefully remove or twist an electrical cord or any

wiring to or from the system, the main power source or any peripheral equipment. It might cause a

fire, an electrical shock, or a system failure. If the wiring is damaged, contact the dealer.

Correctly insert all of the electrical plugs into the electrical outlets. Before inserting a plug into an

electrical outlet, ensure that there is no dust on the plug’s blades. If there is dust on a blade, it might

cause a fire.

Do not use power other than the power that was designated for the system when it was installed.

PWR

dust

PWR

PL- 3

PRODUCT LIABILITY

DANGER

Do not attempt to repair or move the main power source without assistance from the dealer.

Do not put any metal or combustible objects into a vent of the system, the main power source, or

any peripheral equipment. Operating the system in this state might cause a fire, an electrical shock,

or a system failure. If this occurs, turn off the power and contact the dealer.

Be careful when using any peripheral equipment’s Liquid Crystal Display (LCD). If the liquid

leaks, it can be harmful to the user and to the system.

Before connecting any non-NEC, customer-provided equipment, check with the supplier to ensure

that the equipment is compatible. If the supplier cannot confirm the compatibility, do not connect

the equipment. Connecting incompatible equipment might cause a fire or an electrical shock.

PWR

PL- 4

PRODUCT LIABILITY

WARNING

Do not place any object on the system or the main power source. If the object falls, it might cause

personal injury or damage to the equipment.

When removing a plug from an outlet, be sure to grip the plug, not the cord. Gripping the cord to

remove the plug could cause a fire or an electrical shock to occur.

If lightning causes a fault, contact the dealer.

Provide the appropriate temperature, humidity, and ventilation on an around-the-clock basis. For

example, at a height that is one meter (3.28 feet) above the floor, the temperature should be between

20° C and 25qC (68° F to 77° F) and the humidity should be approximately 50%.

Take appropriate anti-static measures so that the other end of the anti-static kit can be connected to

the metal part of the frame.

ATTENTION

Contents

Static Sensitive

Handling

Precautions Required

PL- 5

PRODUCT LIABILITY

WARNING

Observe the following precautions when using any optional batteries:

• The system’s emergency back-up battery may be a rechargeable lead battery. Check the

emergency battery for an electrical failure.

• Battery acid (electrolyte) is extremely harmful to human skin and eyes. If battery acid

contacts skin, wash the affected area with soap and water. If battery acid contacts the eyes,

flush the eyes with water. In either event, seek medical attention. If there is battery acid on a

cloth, use water to wash the battery acid from the cloth.

• Do not intentionally short batteries. Do not put the battery near a fire or in a fire. Do not

disassemble the battery, drop it or knock it against another object.

• The battery’s life expectancy is affected by its environment. The normal battery life is

approximately three years. If the battery is used in an outdoor setting and is exposed to high

temperatures, its life expectancy drops to approximately one year.

• Perform periodic diagnostic tests and maintenance procedures on the emergency battery and

its terminals to ensure their readiness. If there is a power failure and the emergency battery is

not ready, then the system will not work. Additionally, a damaged or dead battery, or terminals

that need replacement might cause battery acid to leak, which might cause smoke or a fire.

The battery and terminals are periodic replacement parts (the cost is chargeable to the

customer). A service contract, with the supplier or service technician, to perform routine

maintenance for the battery is recommended.

Do not touch peripheral equipment with wet hands. Do not allow any liquid to touch any of the

peripheral equipment.

Do not touch the printer’s internal components when replacing disposables such as a cartridge or a

ribbon. Ensure that the printer is turned off and that it is not hot in order to prevent burns from any

accidental contact with the internal components.

Do not drop the peripheral equipment or knock it against another object. These actions might cause

an equipment failure.

PL- 6

ATTENTION

Do not use benzine, thinner or alcohol for cleaning. When removing dust and dirt, put diluted, mild

detergent on a cloth and then wring out the cloth. Remove the dust and dirt with the cloth and then

wipe the cleaned area with a dry cloth.

Do not place any equipment in the following environments:

• Locations that are exposed to direct sunlight

• Locations where the moisture level exceeds the allowed level

• Locations where the equipment might be exposed to water, oil, and chemicals

• Locations with very low temperatures, such as in a walk-in cooler or freezer

• Locations that are exposed to Electromagnetic Interference (EMI) from devices such as

television sets and two-way radios

• Locations that receive illegal electric waves

The life expectancies of the system and the main power source will be shortened if placed in a

location that is affected by hydrogen sulfide or salt, such as a seaside area.

Thinner

REGULATORY

R-1

REGULATORY NOTICE (For North America)

1. CUSTOMER INFORMATION FOR TELEPHONE TERMINAL EQUIPMENT (TTE)

This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the

equipment is a label that contains, among other information, a product identifier in the format:

US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

The telephone company may make changes in its technical operations and procedures. When such changes af-

fect the compatibility or use of the UNIVERGE SV8500 system, the telephone company is required to give

adequate notice of the changes in order for you to maintain uninterrupted service.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive

RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most, but

not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may

be connected to a line, as determined by the total RENs, contact the local telephone company. For products

approved after July 23, 2001, the REN for this product is the product identifier in format:

US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN

of 0.3).

Connection to party line service is subject to state tariffs. Contact the state public utilities commission, public

service commission or corporation commission for information.

For single and two-line equipment that connects to the telephone network via a plug and jack, the plug and jack

used with this equipment must comply with FCC Part 68 rules.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply

with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord

and modular plug is provided with this product. It is designed to be connected to a compatible modular jack

that is also compliant.

1.1 TELEPHONE/SERVICE PROVIDER COMPANY NOTIFICATION

Before connecting this telephone system to the telephone network, the following information must be provided

to the telephone company:

• Your telephone number.

• FCC registration number:

For SV8500 system, use the following number:

FCC Product Identifier: US:NIFMF21BSN8153, US:NIFPF21BSN8153, US:NIFKF21BSN8153

Ringer Equivalence Number (REN): 2.1B

USOC jacks required: RJ21X, RJ2EX, RJ2GX

Autres manuels pour SV8500

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NEC Serveur

NEC

NEC Express5800/120Rh-1 Manuel utilisateur

NEC

NEC Express 5800 Manuel utilisateur

NEC

NEC SV8300 Manuel utilisateur

NEC

NEC HX4500 Manuel utilisateur

NEC

NEC Express5800/R320e-M4 Manuel utilisateur

NEC

NEC Express5800 120Ld Manuel utilisateur

NEC

NEC Express5800 320La Manuel utilisateur

NEC

NEC Express5800/R120e-1M Manuel utilisateur

NEC

NEC Express 320Lc Manuel utilisateur

NEC

NEC 5800 Series Manuel utilisateur

NEC

NEC NEC Express5800 Series Manuel utilisateur

NEC

NEC Express5800/R120g-1E Manuel d'utilisation

NEC

NEC NEC Express5800 Series Manuel utilisateur

NEC

NEC Express5800/R120b-1 Manuel utilisateur

NEC

NEC Univerge SV8100 Manuel utilisateur

NEC

NEC N8800-164F Manuel utilisateur

NEC

NEC Express5800/120Ri-2 Manuel utilisateur

NEC

NEC N8800-155F Manuel utilisateur

NEC

NEC NEC Express5800 Series Manuel d'utilisation

NEC

NEC R120d-2E Manuel utilisateur

NEC

NEC EXPRESS 320Lb Manuel utilisateur

NEC

NEC Exress5800 Series Manuel utilisateur

NEC

NEC N8100-1909F Manuel d'utilisation

NEC

NEC Univerge SV8100 Manuel du propriétaire

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur