NEC MultiSync WD551 Manuel utilisateur

Firmware Update Procedure

by USB

Rev.1.0

2

Please read before updating firmware

This document explains the procedure to update firmware of this device by using USB storage device. For

more details about the name for the each part of this device, operations of OSD and more, please refer to

the User’s Manual.

◼Precautions

Target model : WD551

Do not turn off the main power of this device, or extract USB storage device during update.

USB port of this device does not guarantee all USB storage devices to work properly.

This device supports USB storage device formatted with FAT32 format. USB storage devices

formatted with FAT16 format or NTFS format cannot be used. If you cannot update firmware,

please check the format of the USB storage device. Refer to the computer’s instruction user’s

manual or help file on how to format a USB storage device.

The data set by OSD in this device will be initialized by updating firmware.

◼About the sign

This document uses the following signs.

Note

Mentions the information which should be noted.

Information

Mentions the additional information or a useful information.

3

Preparation for Firmware Update

1. Unzip firmware file

Unzip firmware file. There is upgrade_3686 folder.

FIRMWARE_WD551_SW_****.zip

¥FIRMWARE_WD551_SW_****

¥upgrade_3686

Information

The file name for the Firmware File will be following:

FIRMWARE

File Name（*1）

Extension

FIRMWARE

FIRMWARE_WD551_SW_****.zip

.zip

（*1）**** ：Version number

2. Copy upgrade_3686 folder to USB storage device

Store upgrade_3686 folder directly under the USB storage device.

3. Turn off the main power of this device

unzip

（Drive name of USB device）

¥upgrade_3686

4

4. Connect USB storage device with upgrade_3686 folder stored

Insert the USB storage device into USB port (SERVICE PORT) of the monitor.

Preparation for firmware update has completed.

Please move on to “Update Firmware”(→P5).

5

Update Firmware

Note

Do not turn off the main power of this device, or extract USB storage device during update.

1. Turn on the main power of this device

2. Press power button until its LED blinks

Press power button until the LED of power button start to blink and then release power button.

Firmware update starts.

.

6

3. Automatically reboot twice

After firmware update starts, the monitor reboots twice as below.

Screen 1

Screen 2

reboot

reboot

7

4. Initial Setup scree is displayed

Upon the completion of update, Initial Setup screen is displayed.

Perform the initial setup.

5. Remove USB storage device from the monitor

Firmware update has completed.

8

When failed to update firmware

When you have failed to update firmware, please check the following points.

◼Device does not operates with power on

If you turn off the main power under update failed condition, this device may not operate properly.

However, update function with USB storage device may be available, so please follow the procedure in

this document and try to update again.

◼Firmware update does not start

If this device does not operate properly, firmware update may not start.

If firmware update does not start, please contact your dealer.

Autres manuels pour MultiSync WD551

2

Table des matières

Autres manuels NEC Moniteur

NEC

NEC AccuSync LCD5V Manuel utilisateur

NEC

NEC P232W-BK Manuel utilisateur

NEC

NEC MultiSync P212 Manuel utilisateur

NEC

NEC MultiSync X401S Manuel utilisateur

NEC

NEC S401 Manuel utilisateur

NEC

NEC MultiSync EA271Q-WH Manuel utilisateur

NEC

NEC LCD195VX-BK - MultiSync - 19" LCD Monitor Manuel utilisateur

NEC

NEC V221W Manuel utilisateur

NEC

NEC MultiSync LCD1810X Manuel utilisateur

NEC

NEC PlasmaSync 42VM5 Manuel utilisateur

NEC

NEC E658 Guide de l'utilisateur

NEC

NEC PX-42VP4DP-A Manuel utilisateur

NEC

NEC MultiSync X461UNV Mode d’emploi

NEC

NEC 42/50PD1 Manuel utilisateur

NEC

NEC LCD2335WXM - MultiSync - 23" LCD TV Mode d’emploi

NEC

NEC P42XC10 - PlasmaSync - 42" Plasma Panel Manuel utilisateur

NEC

NEC MultiSync V461 Manuel utilisateur

NEC

NEC MultiSync EA271Q-BK Manuel utilisateur

NEC

NEC E552 Manuel utilisateur

NEC

NEC MultiSync UN462A Manuel utilisateur

NEC

NEC LCD1720M - MultiSync - 17" LCD Monitor Manuel utilisateur

NEC

NEC MD211C2 Manuel utilisateur

NEC

NEC PlasmaSync PX-61XM2PA Manuel utilisateur

NEC

NEC MultiSync EA232WMI Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG

LG M1950D-PZ Manuel utilisateur