NEC MultiSync LCD1530V Manuel utilisateur

MultiSync LCD1530V

User’s Manual

English-1

English

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN

OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN

EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS

CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE

COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER

(OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have

sufficient magnitude to cause electric shock. Therefore, it is dangerous to make

any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation

and maintenance of this unit has been included. Therefore, it should be read

carefully in order to avoid any problems.

CAUTION

WARNING

RISK OF ELECTRIC SHOCK •DO NOT OPEN

Caution:

When operating the MultiSync LCD1530V with a 126-240V AC power source in

Europe except UK, use the power cord provided with the monitor.

In the UK, a BS approved power cord with a moulded plug has a Black (five Amps)

fuse installed for use with this equipment. If a power cord is not supplied with this

equipment please contact your supplier.

When operating the MultiSync LCD1530V with a 126-240V AC power source in

Australia, use the power cord provided with the monitor.

For all other cases, use a power cord that matches the AC voltage of the power

outlet and has been approved by and complies with the safety standard of your

particular country.

ENERGYSTA R is a U.S. trademark.

As an ENERGYSTA R ®Partner, NEC-Mitsubishi Electronics Display of America, Inc. has

determined that this product meets the ENERGYSTAR guidelines for energy efficiency. The

ENERGYSTAR emblem does not represent EPA endorsement of any product or service.

IBM PC/XT/AT, PS/2, MCGA, VGA, 8514/A and XGA are registered trademarks of

International Business Machines Corporation.

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

NEC is a registered trademark of NEC Corporation.

All other trademarks or registered trademarks are property of their respective owners.

English-2

Declaration

Declaration of the Manufacturer

We hereby certify that the colour monitor

MultiSync LCD1530V (LA-15R01)

are in compliance with

Council Directive 73/23/EEC:

- EN 60950

Council Directive 89/336/EEC:

- EN 55022

- EN 61000-3-2

- EN 61000-3-3

- EN 55024

and marked with

NEC-Mitsubishi Electric Visual Systems, Corp.

686-1, NISHIOI OI-MACHI

ASHIGARAKAMI-GUN

KANAGAWA 258-8533, JAPAN

Power consumption of

the monitor is less than

3 W when in power-

saving mode.

English-3

English

For the Customer to use in

U.S.A. or Canada

Canadian Department of Communications

Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the

Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du

Règlement sur le matériel brouiller du Canada.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety

Regulations according to C.S.A. C22.2 #950.

Ce produit porte la marque ‘C-UL’et se conforme aux règlements de

sûrele Canadiens selon CAN/CSA C22.2 No. 950.

FCC Information

1. Use the attached specified cables with the MultiSync LCD1530V

colour monitor so as not to interfere with radio and television

reception.

(1)The power supply cord you use must have been approved by and

comply with the safety standards of U.S.A., and meet the following

condition.

Power supply cord Non shield type, 3-conductor

Length 1.8 m

Plug shape

(2)Shielded video signal cable.

Use of other cables and adapters may cause interference with

radio and television reception.

English-4

2. This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

- Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced

radio/television technician for additional suggestions. The user may

find the following booklet, prepared by the Federal Communications

Commission, helpful: “How to Identify and Resolve Radio-TV

Interference Problems.”This booklet is available from the U.S.

Government Printing Office, Washington, D.C., 20402,

Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two

conditions. (1) This device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

U.S. Responsible party: NEC-Mitsubishi Electronics

Display of America, Inc.

Address: 1250 N. Arlington Heights Road

Itasca, Illinois 60143-1248

Tel. No.: (630)467-3000

Type of Product: Computer Monitor

Equipment Classification: Class B Peripheral

Models: MultiSync LCD1530V

We hereby declare that the equipment specified above conforms to the technical

standards as specified in the FCC Rules.

English-5

English

Contents

Your new NEC-Mitsubishi MultiSync LCD monitor box* should contain

the following:

•MultiSync LCD1530V monitor with tilt base

•Power Cord

•Video Signal Cable

•User’s Manual

•CD-ROM includes complete User‘s Manual in PDF format and

Windows related files (Inf file and color profile). To see the complete

User‘s Manual, Acrobat Reader 4.0 must be installed on your PC.

* Remember to save your original box and packing material to transport

or ship the monitor.

English-6

Quick Start

To attach the MultiSync LCD monitor to your system, follow these

instructions:

1. Turn off the power to your computer.

2. For the PC: Connect the 15-pin mini D-SUB of the appropriate

signal cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For the Mac: Connect the MultiSync LCD1530V Macintosh cable

adapter to the computer (Figure B.1). Attach the 15-pin mini D-SUB

end of the appropriate signal cable to the MultiSync LCD1530V

Macintosh cable adapter (Figure B.1). Tighten all screws.

Remove connector cover and cable cover on back of monitor

(Figure E.1).

3. Connect the 15-pin mini D-SUB of the video signal cable to the

appropriate connector on the back of the monitor (Figure C.1).

NOTE: Incorrect cable connections may result in irregular

operation, damage display quality/components of LCD

module and/or shorten the module’s life.

4. Connect one end of the power cord to the MultiSync LCD Series

monitor and the other end to the power outlet. Place the video signal

cable and AC power cord under the clips. (Figure C.1).

Replace connector cover and cable cover. (Figure E.1)

NOTE: Adjust the position of the cable under the clips to avoid

damage for cable or monitor.

5. Turn on the monitor (Figure D.1) and the computer.

6. To complete the setup of your MultiSync LCD monitor, use the

following OSM controls:

•Auto Adjust Contrast

•Auto Adjust

Refer to the Controls section of this User’s Manual for a full description

of these OSM controls.

NOTE: If you have any problems,please refer to the

Troubleshooting section of this User’s Manual.

NOTE: For easy removal of the cable cover or signal cable, place

the monitor face down. (Figure R.2)

English-7

English

15-pin

mini D-SUB

15-pin

mini D-SUB

Mac Adapter

(not included)

Figure A.1 Figure B.1

Signal

Cable

AC Power Cord

1. Cables pass through in this hole.

2. Connect each connector Figure C.1

Power Outlet

To Computer

Power Switch

Figure D.1

Clip

English-8

Figure E.1

I. Cable Cover

How to remove this cover.

A. Push marking area

B. Slide to up side

C. Remove

II. Connector Cover

How to remove this cover.

D. Push under side

E. Remove

Push

Marking area

English-9

English

Tilt

Grasp both sides of the monitor screen

with your hands and adjust the tilt as

desired (Figure TS.1).

Remove Monitor Stand

for Mounting

To prepare the monitor

for alternate mounting

purposes:

1. Remove the connector

cover, hinge cover and

cable cover.

(Figure R.1)

2. Disconnect all cables.

3. Place monitor face

down on a non-

abrasive surface.

(Place the screen on a

32 mm platform so that

hole of stand match to

screw location) (Figure R.2).

4. Remove the 4 screws

connecting the monitor to the

stand and lift off the stand

assembly (Figure R.2) the

monitor is now ready for

mounting in an alternate

manner.

5. Connect the AC cord and

signal cable to the back of the

monitor.

6. Reverse this process to

reattach stand.

Figure TS.1

Figure R.1

32mm

Figure R.2

Screws

Push Push

Autres manuels pour MultiSync LCD1530V

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels NEC Moniteur

NEC

NEC MultiSync LCD195VXM+ Manuel utilisateur

NEC

NEC EA273WM-BK Manuel utilisateur

NEC

NEC MultiSync 75 Manuel utilisateur

NEC

NEC NECE171M Manuel utilisateur

NEC

NEC LCD Monitor Manuel utilisateur

NEC

NEC MultiSync EA242WU Manuel utilisateur

NEC

NEC X461UN - MultiSync - 46" LCD Flat Panel... Manuel d'utilisation et d'entretien

NEC

NEC AccuSync 125F Manuel utilisateur

NEC

NEC AccuSync LCD73V Manuel utilisateur

NEC

NEC LCD19WMGX - AccuSync - 19" LCD Monitor Manuel utilisateur

NEC

NEC XP21 - MultiSync - 21" CRT Display Manuel utilisateur

NEC

NEC MultiSync LCD1550M LCD1550M LCD1550M Mode d’emploi

NEC

NEC MultiSync LCD1525S Mode d’emploi

NEC

NEC LCD8205 - MultiSync - 82" LCD Flat Panel... Guide de l'utilisateur

NEC

NEC LCD6520L-BK-AV - MultiSync - 65" LCD Flat Panel... Manuel utilisateur

NEC

NEC MultiSync X461UNV Manuel utilisateur

NEC

NEC 65" InfinityBoard 2.1 Manuel utilisateur

NEC

NEC LCD1760VM - MultiSync - 17" LCD Monitor Manuel utilisateur

NEC

NEC E422 Manuel utilisateur

NEC

NEC MultiSync LCD1700M+ Manuel utilisateur

NEC

NEC LCD4020-2 Manuel utilisateur

NEC

NEC A Series Manuel utilisateur

NEC

NEC LCD3090W-BK-SV - MultiSync - 30" LCD Monitor Manuel utilisateur

NEC

NEC MultiSync X464UNS Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation

LG M1950D-PZ Manuel utilisateur