NEC N8104-157 Manuel utilisateur

- 1 - April 2016(1st Edition)

808-882328-319-A

N8104-157

LAN Driver Installation Guide

(Intel R207)

- 2 - April 2016(1st Edition)

808-882328-319-A

Contents

1. Preface...........................................................................................................................................................3

1.1. Target OS.........................................................................................................................................................3

1.2. Target...............................................................................................................................................................3

1.3. Registration Trademark....................................................................................................................................3

2. Installation of Windows Driver........................................................................................................................4

2.1. The flow of LAN driver installation process ......................................................................................................5

2.2. Confirmation of LAN driver version ..................................................................................................................6

2.3. LAN driver Installation......................................................................................................................................7

2.4. Setting up LAN drivers .....................................................................................................................................8

2.4.1. Setting up common........................................................................................................................................8

3. Adapter teaming setting...............................................................................................................................10

4. Notice........................................................................................................................................................... 11

4.1. About the operation by remote desktop..........................................................................................................11

4.2. About the Windows logs.................................................................................................................................11

4.3. About the Flow Control...................................................................................................................................11

- 3 - April 2016(1st Edition)

808-882328-319-A

Preface1.

Thank you very much for purchasing our product.

This installation guide explains how to set up the LAN drivers of [N8104-157] Dual Port 10GBASE-TAdapter.

1.1. Target OS

Abbreviated designation

Software Production Name

Windows Server 2012 Microsoft® Windows Server® 2012 Standard

Microsoft® Windows Server® 2012 Datacenter

Windows Server 2012 R2 Microsoft® Windows Server® 2012 R2 Standard

Microsoft® Windows Server® 2012 R2 Datacenter

Microsoft® Windows Server® 2012 R2 Foundation

1.2. Target

Refer to the URL below and check the target server.

http://www.58support.nec.co.jp/global/download/index.html

-> Click to model name (product name).

-> Click to “NEC N8104-157 LAN Driver Module (Version R207)” in “Other update”.

1.3. Registration Trademark

Microsoft and its logos, andWindows Server are registered trademarks or trademarks of the Microsoft Corporation in

the U.S. and other countries.

Intel is a registered trademarks of Intel Corporation of the United States.

* In addition, TM and a R mark are not specified in the text.

- 4 - April 2016(1st Edition)

808-882328-319-A

Installation of Windows Driver2.This Section explains how to install the Windows Driver.

Make sure [4.Notice] are confirmed before begins.

Important

・

Parameters of LAN driver back to a default by this installation.

If you

changed parameters from a default, make a memo of the parameter

settings beforehand. And setting parameters after installation of LAN driver

again.

Preparations

1. Refer to the URL below and Download the GVO-008431-G01_xxxxxxxxxxxxxxxxxx.zip (x

is an expression of arbitrary numbers).

http://www.58support.nec.co.jp/global/download/index.html

-> Click to model name (product name).

-> Click to “NEC N8104-157 LAN Driver Module (Version R207)” in “Other update”.

2. Create a Temp folder directly under the system drive.

(e.g., C:\Temp\)

3. Unzip GVO-008431-G01_xxxxxxxxxxxxxxxxxx.zip, copy the LAN folder in the Temp folder.

(e.g., C:\Temp\LAN)

note

If the target server is Express5800/E120g-M or N8104-153/155 is in use, when the LAN

driver is installed by following this installation guide, the latest version of LAN driver will be

applied to the standard network adapter or N8104-153/155.

- 5 - April 2016(1st Edition)

808-882328-319-A

2.1. The flow of LAN driver installation process

The flow of LAN driver installation process

The installation process is executed by the following flow.

Install for the first time?

[3. Adapter teaming setting]

Setup Adapter teaming.

[2.3. LAN driver Installation]

Install LAN drivers.

Configure the setting information of

network (IP address, etc.) and team

(when teaming configure).

Need Adapter Teaming?

Finish

Start

Yes

[2.2. Confirmation of LAN driver version]

Confirm the Network adapter driver version.

Is installation of LAN

driver necessary?

Yes

[2.4. Setting up LAN drivers]

Setup LAN drivers.

Yes

[2.3. LAN driver Installation]

Install LAN drivers.

- 6 - April 2016(1st Edition)

808-882328-319-A

2.2. Confirmation of LAN driver version

Check the Driver version by the procedure below.

1. Sign in to the system into administrator account.

2. Open Device Manager, confirm “Intel(R) Ethernet Controller X550” exists under Network

adapters. Double-click and display property.

-If ”Intel(R) Ethernet Controller X550” is displayed, Installation is first time.Go to [2.3.

LAN driver Installation] procedure.

3. Open Driver tab and click to Driver Details.

Driver File Details is displayed under Network adapters.

4. Compare the displayed network controller driver and following list.

Network controller driver list

Device name

Driver file name

Version

Windows Server

2012

Intel(R) Ethernet Controller X550

ixs63x64.sys

3.12.11.1

Windows Server

2012 R2

Intel(R) Ethernet Controller X550

ixs64x64.sys

3.12.11.1

-If Network controller driver version is same or new, you do not need to install LAN drivers

by this installation guide.

- 7 - April 2016(1st Edition)

808-882328-319-A

2.3. LAN driver Installation

1. Run a command prompt as administrator. Enter the following command at the command

prompt.

cd C:\temp\LAN

2. Enter the following, and then press Enter key.

Windows Server 2012

INSTALL_WS2012.bat

Windows Server 2012 R2

INSTALL_WS2012R2.bat

3. When the following message is displayed, restart the system.

Installation Completed!

4. Check that the driver version is 3.12.11.1. By following [2.2 Confirmation of LAN driver

version].

- 8 - April 2016(1st Edition)

808-882328-319-A

2.4. Setting up LAN drivers

Important

・

After changing parameters of the LAN driver, restart the system.

2.4.1. Setting up common

(1) Setting link speed

Important The transfer rate and duplex mode of the network adapter must be the same as

those of the switching hub.

Follow the procedure below to specify the transfer rate and duplex mode.

1. Open the Device Manager.

2. Expand Network Adapters, and then double-click the name of the network adapter you

want to set. The properties of the network adapter will be displayed.

3. Select the Advanced tab, and then set the Speed & Duplex values to the same as those of

the switching hub.

4. Click OK in the network adapter properties dialog box.

(2) Flow Control

It is necessary to set the Flow Control parameter of the network adapter matching to the

connected network equipment (switching hub etc.).

Please set Flow Control parameter by the following procedures.

Note

Server Adapter and link partner must be configured by the same value.

- Disabled ：Disabled

- Rx & Tx Enabled ：Receive & Transmit Enabled

- Rx Enabled ：Receive Enabled

- Tx Enabled ：Transmit Enabled

1. Open Device Manager.

2. Expand Network Adapters, and then double-click the name of the network adapter you

want to set. The properties of the network adapter will be displayed.

3. Open Advanced tab and click Flow Control to show Value.

4. The value can be configures by the down-arrow button.

5. Click OK in the network adapter properties dialog box.

- 9 - April 2016(1st Edition)

808-882328-319-A

(3) Jumbo Packet

It is necessary to set the Jumbo Packet parameter of the network adapter matching to the

connected network equipment (switching hub etc.).

Please set Jumbo Packet parameter by the following procedures.

Important Set all Jumbo Frame to the same value to all adapters that composes the team.

1. Open Device Manager.

2. Expand Network Adapters, and then double-click the name of the network adapter you

want to set. The properties of the network adapter will be displayed.

3. Open Advanced tab and click Jumbo Packet to show Value.

4. Change the value by the down-arrow button.

5. Click OK in the Network adapter properties dialog box.

- 10 - April 2016(1st Edition)

808-882328-319-A

Adapter teaming setting3.

This section describes setting procedures about adapter teaming.

Refer to the URL below and follow the instructions.

- Windows Server 2012:

http://www.58support.nec.co.jp/global/download/w2012/index.html

-> [Technical Information] - [NIC Teaming (LBFO)]

- Windows Server 2012 R2:

http://www.58support.nec.co.jp/global/download/w2012r2/index.html

-> [Technical Information] - [NIC Teaming (LBFO)]

Table des matières

Autres manuels NEC Adaptateur

NEC

NEC N8118-01 Manuel utilisateur

NEC

NEC N8403-065 Manuel utilisateur

NEC

NEC DSX Manuel utilisateur

NEC

NEC N8104-185 Manuel utilisateur

NEC

NEC MC-BA10 Manuel utilisateur

NEC

NEC N8104-224 Manuel utilisateur

NEC

NEC N8104-182 Manuel utilisateur

NEC

NEC IP3NA-BHA Manuel d'instructions

NEC

NEC N81004-153S Guide de l'utilisateur

NEC

NEC N8104-153 Guide de l'utilisateur

NEC

NEC VERSA AC ADAPTER Manuel utilisateur

NEC

NEC N8803-040A Manuel utilisateur

NEC

NEC N8104-211 Manuel utilisateur

NEC

NEC SB-02AM Manuel utilisateur

NEC

NEC NE3304-149 Manuel utilisateur

NEC

NEC N8104-225 Manuel utilisateur

NEC

NEC N8104-178 Guide de l'utilisateur

NEC

NEC N8104-221 Manuel utilisateur

NEC

NEC NE3703-611 Manuel utilisateur

NEC

NEC 1000BASE-T Manuel utilisateur

NEC

NEC N8104-209 Manuel utilisateur

NEC

NEC PX750CM Mode d’emploi

NEC

NEC 1000BASE-T Manuel utilisateur

NEC

NEC N8104-7149 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur