Neat Bar Manuel utilisateur
Neat Bar
Collaboration System
Neat Bar is a compact and highly
capable meeting device.
Neat Bar includes Camera, Speakers,
Microphones and environmental
sensors all in one compact design.
It’s perfect for bringing superior
-quality audio and video to your
huddle, focus and meeting spaces.
Neat Bar comes with a dedicated
Neat Pad Controller and optional
Scheduling Display.
Simple
setup
All you need is in the box,
including mounts, cables
and clear instructions. So it’s
easy for anyone to install
and set-up, above or below
one or two screens.
Wall mount
Screen mount
Table stand
Neat Bar
Neat Bar comes with
everything you need to get
started, including cables,
wall mount, screen mount
and table stand.
In the box
Screws for mounting to the wall are not included. Mounting on a wall should only be performed
by qualified personnel in line with applicable facility and state regulations. The wall and the
mounting equipment must safely withstand the load of the product.
Neat BarMount adapterTable sta n dScreen mountWall mount
Slide the selected bracket onto the mount
adapter and secure with the hex wrench.
Neat Bar: All-in-one audio and
video device
HDMI cable: 6.5ft (2m)
Ethernet cable: 9.8ft (3m)
Power cord: 9.8ft (3m)
Mount adapter, wall mount, screen
mount and table stand
4 ×M6screw (0.94 in / 24 mm) for VESA mount
4 ×M8screw (0.94 in / 24 mm) for VESA mount
2 ×spacer to secure parallel TV mount
1 ×5 mm hex key for the screen mount
1 ×2 mm hex key for the mount adapter
Neat Pad
Screws for mounting to the wall are not included. Mounting on a wall should only be performed
by qualified personnel in line with applicable facility and state regulations. The wall and the
mounting equipment must safely withstand the load of the product.
Neat Pad works as a Controller for Neat
Bar and can also be configured as a
Scheduling Display for the Meeting
Room. It comes with everything you need
to get started, including cables and
mounting options.
In the box
Wall mountSide mount
Hook the mount
adapter onto the
wall mount and
secure with the
hex wrench.
Mount adapter Neat Pad
Neat Pad: 8-inch touch screen
2 ×Ethernet cable: 9.8ft (3m) + 16.4ft (5m)
PoE power adapter
Mount adapter, side mount and wall mount
4 ×M4screw (0.30 in / 7.5 mm)
for the wall mount
3 ×M4screw (0.19 in / 4.7 mm)
for the side mount
1 ×2.5 mm hex key for the adapters
1 ×2 mm hex key to secure Neat Pad
to the wall mount
Mounting & releasing
Mounting
Slide Neat Bar onto the
selected mounting
option (1). When fully
inserted tilt Neat Bar
back to horizontal and
check if it is secure by
carefully pulling it
towards you.
Releasing
To re l e a s e N ea t B a r
from the selected
mounting option, tilt the
unit to maximum tilt (1)
and carefully slide the
unit towards you (2).
Warning: Do not leave
Neat Bar in a max tilted
position with the red
indicator showing as it
is not secured by the
lock spring.
Size & weight
Neat Bar
Neat Pad
21.9 in (556 mm)
3 in
(76 mm)
3 in
(76 mm)
7. 8 i n ( 1 9 8 m m )
5 in
(127 mm)
1.7 in
(42 mm)
Width: 21.9 in (556 mm)
Height: 3 in (76 mm)
Depth: 3 in (76 mm)
Weight: 3.75 pounds (1.7 kg)
Width: 7.8 in (198 mm)
Height: 1.7 in (42 mm)
Depth: 5 in (127 mm)
Weight: 1.15 pounds (520 g)
Setup & connectivity
Setup
Use the provided cables to set up Neat Bar.
Connect the cables according to the illustration.
Cables marked are included. Cables marked
are optional and not required for basic use
of the system.
Requirements for
a complete setup
Display
Internet connection
Video service
Environmental Requirements
Ambient operating temperature:
32° to 95° F (0° - 35° C)
Storage temperature: 5° - 149° F (-15° - 65° C)
Relative humidity: 20% to 80%
Additional Product
Information
https://neat.no/bar
Neat Bar and Neat Pad - User Manual rev10
AC power
9.8ft (3m) Cable
Ethernet port
9.8ft (3m) Cable
USB-C
Factory reset button
HDMI-out for external screen
6.5ft (2m) Cable
HDMI-out for external screen
HDMI-in for screen sharing (1080p)
The 16.4ft (5m) Ethernet
Cable provided is not to
be used for in-wall
installation. In-wall cable
routing should only be
performed by qualified
personnel using
appropriate equipment.
USB-C Debug
Ethernet port
16.4ft (5m) Cable
Factory reset button
Power over Ethernet
(PoE)
Power adapter for AC
WiFi
Security lock slot
WiFi
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Neat Système de conférence
Manuels Système de conférence populaires d'autres marques
Kramer
Kramer VIA GO Manuel utilisateur
AVT
AVT MAGIC AC1 Go Manuel utilisateur
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuel utilisateur
Sony
Sony PCS-I150 Manuel utilisateur
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuel utilisateur
Prentke Romich Company
Prentke Romich Company Vanguard Plus Mode d’emploi
