NCR 5966 Manuel utilisateur
NCR RealPOS Value Touch Display
(5966 15-Inch)
Release 1.0
User Guide
B005-0000-1770
Issue D
The product described in this book is a licensed product of NCR Corporation.
NCR is a registered trademark of NCR Corporation.
It is the policy of NCR Corporation (NCR) to improve products as new technology, components, software, and firmware become available.
NCR, therefore, reserves the right to change specifications without prior notice.
All features, functions, and operations described herein may not be marketed by NCR in all parts of the world. In some instances,
photographs are of equipment prototypes. Therefore, before using this document, consult with your NCR representative or NCR office for
information that is applicable and current.
To maintain the quality of our publications, we need your comments on the accuracy, clarity, organization, and value of this book.
Address correspondence to:
Manager, Information Products
NCR Corporation
2651 Satellite Blvd.
Duluth, GA 30096
Or send feedback:
http://www.info.ncr.com/eFeedback.cfm
Copyright © 2007
By NCR Corporation
Dayton, Ohio U.S.A.
All Rights Reserved
i
Table of Contents
Chapter 1: Overview
Model Numbers ................................................................................ 1-1
Chapter 2: Site Preparation
Electrical Requirements .......................................................................... 2-1
5966 Electrical Requirements........................................................... 2-1
Store AC Wiring Requirements........................................................ 2-1
Environmental Requirements .................................................................. 2-2
Barometric Pressure.......................................................................... 2-2
Temperature...................................................................................... 2-2
Humidity ........................................................................................... 2-2
Weight ..................................................................................................... 2-2
Dimensions.............................................................................................. 2-3
5966 with Table Top Mount ............................................................. 2-3
5966 with 5964-K032 Table Top Mount.......................................... 2-3
System Cables ......................................................................................... 2-4
VGA Cable ....................................................................................... 2-4
12.1-Inch LCD Aux Power Cable..................................................... 2-4
Power Cords...................................................................................... 2-4
Chapter 3: Hardware Installation
Installing the 5966................................................................................... 3-1
Connector Panel Access.................................................................... 3-1
Mounting Options ............................................................................. 3-2
Cable Routing ................................................................................... 3-2
Standard Integration Tray Display Mount (5964-K022/K023) .... 3-2
Standard Remote Table Top Mount (5964-K030/K031).............. 3-3
Connecting to a POS......................................................................... 3-4
Video Cable Connections ............................................................. 3-4
Data Cable Connections ............................................................... 3-5
Power Cable Connections............................................................. 3-6
Installing a 5964-K030/K031 Table Top Mount..................................... 3-7
Installation Procedures...................................................................... 3-7
Display Controls...................................................................................... 3-9
Power Indicator................................................................................. 3-9
On Screen Display (OSD)............................................................... 3-10
Menu Button............................................................................... 3-10
Select Button .............................................................................. 3-10
ii
Navigate Up................................................................................ 3-10
Navigate Down........................................................................... 3-10
Power Button .............................................................................. 3-10
Screen Adjustment Operation Procedure........................................ 3-11
Chapter 4: OSD Adjustment
Main Menu .............................................................................................. 4-1
OSD Adjusting and Controls................................................................... 4-2
Chapter 5: Touch Screen Calibration - Windows
Installing and Calibrating the Touch Screen ........................................... 5-1
Installing the Driver and Utility........................................................ 5-1
4-Point Calibration Procedure .......................................................... 5-2
9-Point Linearization Procedure ....................................................... 5-5
Chapter 6: Touch Screen Calibration - Linux
Calibration Procedures ............................................................................ 6-1
4-Point Calibration Procedure .......................................................... 6-4
25-Point Linearization Procedure ..................................................... 6-8
Chapter 7: Auto Config Adjustment
Chapter 8: MSR Driver
Chapter 9: Maintenance
Cabinet and Touch Screen Cleaning Procedures..................................... 9-1
MSR Cleaning Procedures ...................................................................... 9-2
Appendix A: Technical Data
Display Timing........................................................................................A-2
iii
Revision Record
Issue Date Remarks
A Feb 2007 First issue
B July 2007 Added Calibration Chapter
C Jan 2008 Added MSR Driver Chapter
D Mar 2009 Added Site Preparation Chapter; updated Hardware
Installation Chapter
Audience
This book is written for hardware installer/service personnel, system integrators, and field
engineers.
Note: This document is NCR proprietary information and is not to be disclosed or
reproduced without consent.
Safety Requirements
The NCR RealPOS 5966 conforms to all applicable legal requirements. To view the
compliance statements see the NCR RealPOS Peripherals Safety and Regulatory Statements
(B005-0000-1701).
Chapter 1: Overview
NCR’s RealPOS 5966 value touch display is designed and developed to provide a cost-
effective touch solution for retailers who want to maximize store productivity and extend the
life span of the touch display. The NCR 5966 is a 15-inch low cost XGA (1024x768) Liquid
Crystal Display with a 5-wire resistive touch screen for operator input.
It has the following features:
•15’ LCD XGA (1024x768) Native Resolution, 160 nit Brightness
•Dual Bulb TFT LCD (also supports VGA, SVGA Resolutions)
•5-Wire Resistive Touch, USB Interface
•Video - VGA, Standard 15-Pin Female
•Integrated Stereo Speakers
•Power Supplied via AC Line Input or 12 DC Power Brick
•VGA, Touch, Speaker and Power Cables
•Remote Table Top Mount
•Optional MSR- Field Installable, USB Interface
•VESA standard 75mm mounting pattern on the back of the enclosure
•Uses NCR’s industry standard OPOS and JavaPOS drivers, supporting most applications
and standard NCR supported retail Windows and Linux operating systems.
Model Numbers
Major Model Description
5966-1011 15” Value Resistive Touch Monitor, 350 nit, Remote Mount, Cables (G11)
5966-1012 15” Value Resistive Touch Monitor, 350 nit, Remote Mount, Cables (CG1)
1
1-2 Chapter 1: Overview
Product Components
The 5966 is shipped with a Standard Table Top Mount. This mount can be replaced with an
NCR 5964-K030 (Beige) or NCR 5964-K031 (Charcoal) Table Top Mount if desired.
Note: When using the alternate mount the Vesa Adapter Plate is required (included with the
unit).
Also included with the unit:
•VGA cable for video
•USB cable for data
•Power Brick is included for when USB power is not available on the host terminal.
Note: The USB Power Cable is ordered separately.
•Audio cable (optional) - Connects to the Audio Connector on the 5966 and the Audio Out
port on the host computer.
27331
5966 w/Propietary Mount Vesa Adapter Plate
VGA Cable
USB Cable
Audio Cable
AC Power Cord (U.S)
DC Power Brick
- 5964-K030 (Beige)
- 5964-K031 (Charcoal)
5966 w/5964-K030/K031 Mount
Chapter 2: Site Preparation
Electrical Requirements
5966 Electrical Requirements
The monitor's power cord plugs into a three-wire, single-phase, 120 or 240 VAC receptacle on
the monitor. The available power cords are described in the System Cables section.
120 volt 240 volt
Voltage Ranges 100 - 127 VAC 200 - 240 VAC
Frequency 50/60 Hz 50/60 Hz
Current (A) (Max.) 0.9 0.3
Store AC Wiring Requirements
The customer must provide suitable AC power for the monitor. A dedicated unswitched power
line dedicated to the NCR equipment installation is recommended. Refer to the NCR
Workstation and Peripherals AC Wiring Guide (BSTO-2115-53) for store AC wiring
requirements. The AC outlet must be installed near the monitor and easily accessible to the
operator.
2
2-2 Chapter 2: Site Preparation
Environmental Requirements
Barometric Pressure
The terminal operates within the following barometric pressure conditions:
•Maximum operating altitude: 2,750 m (9,843 ft.)
•Operating range of pressure: 105 to 72.4 kPa (15.2 to 10.5 lb./in.)
Temperature The terminal operates over the temperature ranges shown below. Continuous operation must
be avoided at or near the indicated temperature extremes or in locations where the temperature
changes beyond the restrictions.
Temperature Parameter Restriction
Operating 0°C to 40°C (32°F to 104°F), dry bulb
Storage -20°C to 60°C (-4°F to 140°F), three months
Humidity The terminal operates within the humidity ranges shown below. Continuous operation must be
avoided at or near the indicated humidity extremes or in locations where the humidity changes
beyond the restrictions. Never expose the terminal to condensation.
Humidity Type Restriction
Relative 15% to 85%
Storage 15% to 85%
Shipping 15% to 85%
Weight
5.4 kg (11.9 lbs.)
Table des matières
Autres manuels NCR Moniteur
NCR
NCR 7610-K453 Manuel
NCR
NCR 7403 K451 Manuel
NCR
NCR VOYIX 7772-K461 Manuel
NCR
NCR 7825 Manuel utilisateur
NCR
NCR NCR 5972 Manuel utilisateur
NCR
NCR 7761-K451 Manuel
NCR
NCR RealPOS 5976-1 Series Manuel utilisateur
NCR
NCR RealPOS X Series Manuel utilisateur
NCR
NCR 7702 K460 Manuel
NCR
NCR 5964 Manuel utilisateur
