Naxa NAS-3080 Manuel utilisateur
VIBE METRO Bluetooth®Speaker
NAS-3080
Instruction Manual
Please read carefully before use and keep for future reference.
Page 2 Naxa Electronics
Thank You
We know you have many choices when it comes to
technology; thank you for choosing us here at Naxa
Electronics. Established in 2001 in Los Angeles, Califor-
nia, we are dedicated to delivering products that en-
tertain and delight.
We trust that you will be happy with your purchase.
Please read this manual carefully and save it for refer-
ence. You may also nd the latest FAQ, documentation,
and other product material at our website. Come visit
us on the web at www.naxa.com and see all that we
have to offer!
In the Box
Please take a moment to make sure that you have ev-
erything in the list below. Although we make every ef-
fort to ensure that each Naxa device is securely packed
and sealed, we know a lot can happen in between us
and you. If anything is missing, check back with your
local retailer to get immediate assistance. If they can-
not help you, please contact our Naxa Support team at
www.naxa.com/naxa_support.
•NAS-3080
•Combination USB charge + 3.5 mm AUX adapter
cable
www.naxa.com Page 3
At a Glance
1 3
2
Part Description
1DC 5 V Micro USB power connector. Connect to
a USB power source to charge/power the
unit.
Plug in the included cable to improve the
unit’s radio reception.
2 USB port Play compatible MP3 les from USB
ash memory drives.
3 Power switch Set to ON to turn the speaker on.
Set to OFF to turn the speaker off.
Page 4 Naxa Electronics
4
5
7
6
Part Description
4Previous: Press to skip to the previous
track or radio station.
Volume down: Press and hold to de-
crease the volume.
5LED Press to change the light mode (Mode 1,
Mode 2, Off).
6 Mode: Press and hold to switch between
Bluetooth, Radio, AUX, and Music Play
modes. (Music Play is only available
when a compatible microSD card is
installed.)
Play/pause: Press to start, pause, or
resume playback.
Phone: Control the speakerphone func-
tions when the speaker is connected to a
Bluetooth enabled phone.
7 Next: Press to skip to the next track.
Volume up: Press and hold to increase
the volume.
www.naxa.com Page 5
12
11
10
8
9
Part Description
8 Power LED Lights red when the speaker is charging.
9 MIC Built-in microphone for speakerphone
functions.
10 Status LED Flashing blue quickly: Bluetooth®Pairing
mode.
Flashing blue slowly: Playing a track or
Bluetooth device.
Steady blue: Connected to a Bluetooth
device.
11 TF Play compatible MP3 les from microSD
or microSDHC memory cards.
12 Multicolor
lights
Press [LED] to control the Multicolor
light effects.
Page 6 Naxa Electronics
Connecting Power
Your speaker has an integrated rechargeable battery.
Upon initial use, the battery should be charged fully to
ensure optimal performance and battery life.
Use the included USB cable to connect the speaker to a
USB power source to charge the battery.
•Connect the small end of the included USB charge
cable to the DC 5V port of the speaker [1].
•Connect the large end of the cable to a high-power
USB port of a computer. The computer should be
powered on.
The Power LED will light red when the
speaker is charging.
It takes approximately 2 hours to fully
charge the battery.
⚠To optimize the performance and longev-
ity of the battery, do not charge it for more
than 4 hours.
⚠The battery used in this device may present
a re or chemical burn if mistreated. Do not
disassemble, incinerate, or heat the battery.
Do not leave the battery in a place subject
to direct sunlight, or in a car with its win-
dows closed.
Do not connect the unit to a power source
other than that which is indicated here or on
the label as this may result in the risk of re
or electric shock.
To turn the speaker on, set the Power switch [3] to the
ON position.
To turn the speaker off, set the Function switch [1] to
the OFF position.
www.naxa.com Page 7
Using Bluetooth®Mode
Pairing a Device with Bluetooth®
A device must be paired with the speaker before using
them together for the rst time.
Make sure Bluetooth is enabled on your device before
attempting to pair it.
Set your speaker to Bluetooth mode (press and hold
. The speaker will automatically search for a paired
device. If it nds a paired device, it will connect to it
automatically, and you’re ready to play music from
that device.
If it does not detect a paired device, it will switch to
Pairing mode (the Status LED will [10] ash blue and
the speaker will announce “The Bluetooth device isr
ready to pair”). When the speaker is in Pairing Mode,
it will announce itself to nearby Bluetooth devices and
accept pairing requests from them.
1. The speaker will announce itself as “NAXA NAS-
3080.” Use your device to search for nearby Blue-
tooth devices. (This function is usually in the
Bluetooth settings menu; refer to your device’s in-
struction manual to learn more.)
2. Select the speaker from the list of found devices.
3. If your device asks for a passcode, use “0000” to
complete the pairing process.
When the speaker is paired and connected to a device,
the speaker will announce “The Bluetooth device has
connected successfully” and the Status LED [10] will
blink blue slowly.
If the pairing process fails, turn the speaker
off, set the speaker to Bluetooth mode, and
then repeast steps 1-3.
Make sure that the volume of your device is
set to its maximum level; use the speaker to
adjust the volume to a comfortable level.
The speaker cannot be paired with more
than one device at a time.
Page 8 Naxa Electronics
Bluetooth®Speaker Controls
When the speaker is connected to a Bluetooth® device:
To do this... ...do this
Start, pause, or resume audio
playback
Press .
Skip to the previous track Press .
Skip to the next track Press .
Decrease the volume level Hold .
Increase the volume level Hold .
Your Bluetooth device must support re-
mote functions in order to use the play
controls on the speaker.
Bluetooth®Phone Controls
When the speaker is connected to a Bluetooth®phone:
To do this... ...do this
Answer or end a call Press .
Reject an incoming call Press and hold .
Call back the last number Press twice quickly.
www.naxa.com Page 9
Using the Radio (FM)
Your speaker can receive FM radio broadcasts. Press
and hold [6] to switch the speaker to Radio mode.
For better reception, plug the small micro
USB connector of the included cable into
the DC 5V port of the speaker [1].
The rst time you use the FM radio, press to scan
for stations and save them to preset memory. You
should also do this if you move the speaker to a differ-
ent location as the available stations will change.
When listening to the FM radio:
To do this... ...do this
Scan for stations and save them to
preset memory
Press .
Tune to a lower preset station Press .
Tune to a higher preset station Press .
Decrease the volume level Hold .
Increase the volume level Hold .
Using the Music Player
(MP3)
Your speaker can play MP3 les from microSD/microS-
DHC memory cards as well as USB ash memory de-
vices. Load memory cards in the TF slot [5]; USB ash
drives should be plugged in to the USB port [4]. The
speaker will switch to Music Player mode automati-
cally when it detects a USB ash drive or memory card.
Music Player mode is only available when
the speaker detects a compatible memory
card or USB device.
The memory card and USB reader cannot
be used at the same time. Please connect
only one type of memory device at a time.
Page 10 Naxa Electronics
When the speaker is in MP3 Music Player mode:
To do this... ...do this
Start, pause, or resume audio
playback
Press .
Skip to the previous track Press
Skip to the next track Press .
Decrease the volume level Hold .
Increase the volume level Hold .
⚠Do not remove memory cards from the
speaker while the speaker is on. Doing so
may damage the speaker system or mem-
ory card.
Using AUX Input Mode
Connect devices without Bluetooth®by using the AUX
connection. The included 3.5mm AUX adapter is re-
quired to make this connection.
1. Connect the 3.5mm plug of the included AUX adapt-
er to the device’s headphone or line-out jack.
2. Connect the small micro USB plug to the DC 5V port
of the speaker [1].
3. Press and hold to switch the speaker to AUX
Input mode.
4. Turn on the device. Lower the volume on both the
device and speaker.
5. Set the device volume to 80% of its maximum and
then start playback.
6. Press and hold to gradually increase the volume
of the speaker to a comfortable level.
Use the connected AUX device to control
all functions in AUX mode. The speaker can
only be used to adjust the volume.
Table des matières
Autres manuels Naxa Intervenants
Naxa
Naxa NAS-3073 Manuel utilisateur
Naxa
Naxa NAS-3059 Manuel utilisateur
Naxa
Naxa NAS-3106D Manuel utilisateur
Naxa
Naxa VIBE 3 NAS-3082 Manuel utilisateur
Naxa
Naxa NAS-3076 Manuel utilisateur
Naxa
Naxa NAS-5003 Manuel utilisateur
Naxa
Naxa NAS-3078 Manuel utilisateur
Naxa
Naxa Sound Pro NDS-1214 Manuel utilisateur
Naxa
Naxa NAS-5004 Manuel utilisateur
Naxa
Naxa NAS?3055 Manuel utilisateur
Naxa
Naxa NAS-3108D Manuel utilisateur
Naxa
Naxa NAS-3010 Manuel utilisateur
Naxa
Naxa NAS-3055 Manuel utilisateur
Naxa
Naxa Sound Pro NDS-8004 Manuel utilisateur
Naxa
Naxa NAS-3102 Manuel utilisateur
Naxa
Naxa Sound Pro NDS-1514 Manuel utilisateur
Naxa
Naxa NHS-2012A Manuel utilisateur
Naxa
Naxa NAS-5001 Manuel utilisateur
Naxa
Naxa NDS-1210 Manuel utilisateur
Naxa
Naxa NDS-1215 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur