Navman SmartGPS Manuel utilisateur

Get more information at www.navman.com.au or www.navman.co.nz

SmartGPS QSG AU.indd 1 8/14/2013 8:48:22 AM

Quick Start Guide

Get more information at www.navman.com.au or www.navman.co.nz

Safety

This Navman is a vehicle-navigation aid designed to

assist you in arriving to your selected destinations.

Please check with your state or local law enforcement

for applicable regulations regarding mounting to the

windshield. Go to www.navman.com.au or www.

navman.co.nz for alternate mounting solutions.

The driver should enter data or program the Navman

receiver only when the vehicle is stopped. Only a

vehicle passenger should enter data or program the

receiver while the vehicle is moving.

It is your responsibility to comply with all traffic laws.

Every attempt is made to ensure that the database

is accurate. However, roadways, points of interest

(POIs), and business and service locations may change

over time.

Keep the Navman safe from extreme temperature

conditions. For example, do not leave it exposed to

direct sunlight for an extended period of time. The

maximum operating temperature is 60°C.

Take care when mounting the Navman in your

vehicle, whether using the windshield mount or other

mount or accessories, that it does not obstruct the

driver’s view of the road, interfere with the operation

of the vehicle’s safety devices such as air bags, or

present a hazard to occupants of the vehicle should

the receiver be dislodged while driving. You assume

the risks associated with damage to your vehicle or

vehicle occupants as the result of your choices in

mounting the Navman.

The battery is rechargeable and should not be

removed. In the event it should need to be replaced,

please contact Navman Technical Support.

“Made for iPod” and “Made for iPhone” means that an

electronic accessory has been designed to connect

specifically to iPod or iPhone, respectively, and

has been certified by the developer to meet Apple

performance standards. Apple is not responsible for

the operation of this device or its compliance with

safety and regulatory standards. Please note that the

use of this accessory with iPod or iPhone may affect

wireless performance.

SmartGPS QSG AU.indd 2 8/14/2013 8:48:23 AM

Get more information at www.navman.com.au or www.navman.co.nz

Navman SmartGPS

Go Beyond Traditional GPS

• All the features you’d expect to find in a

GPS navigational device.

• Go Social: Receive Yelp®menumania.co.nz

and Foursquare®reviews and details based

on your location.

• Wirelessly save, sync and share between

the Navman SmartGPS and smartphones.

• Take the SmartGPS experience beyond the

vehicle using the Android™ or iPhone®

app.

• Receive updated petrol prices and weather,

saving time and money.

This booklet will give you the information you

need to set up your Navman SmartGPS.

Connect with us socially on:

•Facebook: facebook.com/NavmanANZ

•YouTube: youtube.com/navmananz

•Google+: google.com/+navmananz

•Pinterest: pinterest.com/navmananz

•Blog: blog.navman.com.au

SmartGPS QSG AU.indd 3 8/14/2013 8:48:23 AM

Get more information at www.navman.com.au or www.navman.co.nz

First Time Use

1. Install the Navman in your vehicle [pg. 6].

2. Determine your current location [pg. 7]

3. Prepare the Navman for content using the

SmartGPS Eco Content Manager [pg. 8].

4. Connect to WiFi and download content

[pg. 9].

5. Pair any Bluetooth devices you want to use

with the device [pg. 10].

6. Optional. Connect the device to your

smartphone using the Navman SmartGPS

Companion app

[pg. 11].

Navman SmartGPS

APower button Press to turn the

receiver on or off

BHome button Press to return to

the Map screen

CMicrophone Used with

Bluetooth®

DmicroSD Card (Optional) Used

for additional

map storage.

ESpeaker Out Connect external

speakers

FUSB

Connection

Connect to

power source

or personal

computer

GAV In Connect an

audio/visual

device (optional

backup camera)

Use the Home button [B] to

return quickly to the Map screen.

SmartGPS QSG AU.indd 4 8/14/2013 8:48:23 AM

Get more information at www.navman.com.au or www.navman.co.nz

D E F G

Navman SmartGPS

SmartGPS QSG AU.indd 5 8/14/2013 8:48:23 AM

Get more information at www.navman.com.au or www.navman.co.nz

Installation

Choose a Location

• A location with a clear view of the sky.

• Follow safety guidelines.

Clean the Surface

1. Clean the area on the windshield where

the device will be mounted.

2. Allow the surface to dry.

Attach the Device

Connect Power

The device battery charges whenever it is

connected to vehicle power.

1. Connect the power cable to a vehicle

power receptacle.

2. Check the light on the vehicle power

connector and make sure it is on.

If the indicator light is not on, you may

need to reseat the connector or turn the

vehicle ignition on.

Power On/Off

ON Press and hold the Power button [A] to

turn the device on. (If the device does not

turn on, allow the battery to charge for a

few minutes.)

OFF Press the Power button again to turn the

device off. The device will begin powering

down for 15 seconds. Tap “Suspend Now”

to power the device down immediately.

SmartGPS QSG AU.indd 6 8/14/2013 8:48:24 AM

Get more information at www.navman.com.au or www.navman.co.nz

Current Location

Calculate Current Location

The device needs to calculate your current location

before it can successfully add content.

1. Follow the instructions on page 6 to install

the device.

2. Press and hold the power button.

3. Once the satellites are being tracked, the

device will begin receiving information

that it will calculate into a current location

value.

4. When the current location has been

calculated, the displayed map will change

and the blue arrow icon will indicate your

location.

Tips

Various factors influence GPS signal reception and

there are some tips you can follow to improve the

signal reception and time it takes to calculate the

current location.

• Leave any enclosed structure, (garage,

parking structures, etc.).

• Make sure you have a ‘clear view of the

sky’. Buildings and trees can have an

impact on GPS signal reception. The less

obstructions, the easier the signal reception

is.

• Be sure that the device is mounted where

it can have a clear line of sight to the

windshield.

Note: The first time the device calculates its

location can take up to 1 minute, subsequent times

will be 15 seconds on average.

Not receiving

satellite information

Receiving satellite

information

SmartGPS QSG AU.indd 7 8/14/2013 8:48:24 AM

Get more information at www.navman.com.au or www.navman.co.nz

SmartGPS Eco

Before receiving content (Yelp, Foursquare, etc.)

the receiver needs your current location calculated

[pg. 7] and to be authorised using Navman

SmartGPS Eco. Follow these simple steps to

1. Connect your device to your computer

using a micro USB cable.

2. When connected, the device will display

the message “Your SmartGPS is connected

to a computer”.

3. Open a browser and go to

www.SmartGPSEco.com.au or

www.SmartGPSEco.co.nz.

4. Enter your account information. If you

do not have an account, use the Sign Up!

button to create one.

5. Registration and authorisation will begin

automatically. In a few minutes you will be

notified that the registration is complete.

Your receiver will appear on the left side of the

SmartGPS Eco web page.

• Select “Updates” to install any available

updates.

[Bookmark the SmartGPS Eco page and refer to

it often to keep your receiver up-to-date with

the latest software and maps. Additionally you

can manage your addresses, wish list, recent

destinations as well as other tools to help you get

the most from your receiver.]

SmartGPS QSG AU.indd 8 8/14/2013 8:48:24 AM

Get more information at www.navman.com.au or www.navman.co.nz

WiFi

Content can be downloaded to the device by:

• Connecting to a WiFi network

• Connecting to a PC and sync via the

Navman SmartEco

• A Bluetooth connection with a smartphone

running the Navman app

Setting up a WiFi Connection

1. Connect your receiver to the AC power

adapter or your vehicle power using the

supplied vehicle power cable. (Be sure that

power is being supplied by checking that

the light on the vehicle power adapter is

on.)

2. Turn the receiver on and tap the Settings

icon .

3. Tap on “WiFi”. A list of available WiFi

networks is displayed.

4. Select the desired WiFi network and tap

“Connect”.

5. If requested, enter the password for the

network. The receiver will attempt to log

on to the network and display “Connected”

when successful.

Checking Content Sync Status

1. Turn the receiver on and tap the Settings

icon .

2. Tap “Content”.

3. “Content Sync Status” displays the progress

of content being synced.

You do not need to wait until the Sync Status is

100% to begin using your Navman SmartGPS.

SmartGPS QSG AU.indd 9 8/14/2013 8:48:24 AM

Get more information at www.navman.com.au or www.navman.co.nz

Bluetooth®

You can use your Navman SmartGPS as a

Bluetooth wireless speakerphone. Pair your

Bluetooth phone with the Navman SmartGPS

using these instructions.

Pairing Bluetooth

1. Turn the receiver on and tap the Settings

icon .

2. Select “Bluetooth”.

3. Make sure your phone is on, that Bluetooth

is turned on and near the device.

4. In the area “Pair your phone?”, tap OK.

5. Scroll down the list of available Bluetooth

devices and tap “Connect” for the desired

device.

6. Follow the prompts provided on your

phone and on the Navman SmartGPS to

confirm the pairing.

Using Bluetooth to Originate a Call

1. Tap the Bluetooth icon on the Map

Screen.

2. Use the Dial Pad, Redial or access a phone

number from your Address Book to

originate a call.

Using Bluetooth to Answer a Call

1. When a call is received, the Navman

SmartGPS displays an alert for an incoming

call at the bottom of the screen.

2. Choose “Answer” or “Ignore”.

SmartGPS QSG AU.indd 10 8/14/2013 8:48:24 AM

Table des matières

Autres manuels Navman GPS

Navman

Navman F10 Manuel utilisateur

Navman

Navman EZY15/45 MY80T/85XLT/90XLT Manuel utilisateur

Navman

Navman F-Series F20 Manuel utilisateur

Navman

Navman EZY 100T/EZY200 MY300LMT/MY350LMT Manuel utilisateur

Navman

Navman M-Nav 750 Manuel utilisateur

Navman

Navman Cruise Series Manuel utilisateur

Navman

Navman Tourer 413 LM Instructions d'utilisation

Navman

Navman EZY 40 Series Instructions d'utilisation

Navman

Navman S-Series Manuel utilisateur

Navman

Navman EZY Advanced Instructions d'utilisation

Navman

Navman MY ESCAPE Series Instructions d'utilisation

Navman

Navman F37M Manuel utilisateur

Navman

Navman TRACKER950 Manuel utilisateur

Navman

Navman MY ESCAPE II/MY TRUCK Manuel utilisateur

Navman

Navman EZY series Instructions d'utilisation

Navman

Navman Jupiter 32 Manuel utilisateur

Navman

Navman F350 Series Instructions d'utilisation

Navman

Navman Mivue 6 series Manuel utilisateur

Navman

Navman GPS4100 Instructions de montage

Navman

Navman MiVue 388 Manuel utilisateur

Navman

Navman A300 Sport.Tool Manuel de service

Navman

Navman F15 Manuel utilisateur

Navman

Navman M-Nav 650 Manuel utilisateur

Navman

Navman LA000508 Manuel utilisateur

Manuels GPS populaires d'autres marques

Raven

Raven Cruizer II Manuel

Hama

Hama 53118 Manuel utilisateur

Garmin

Garmin SOUNDER 125 Manuel utilisateur

Garmin

Garmin DEZL 580 Manuel utilisateur

Jigabot

Jigabot EX Manuel utilisateur

Pointer

Pointer Cellocator CelloTrack XT LTE Guide d'installation

Queclink

Queclink GV55LITE Manuel utilisateur

Voxson

Voxson Voxtrack GPS500 Manuel d'instructions

Garmin

Garmin ECHOMAP PLUS Manuel utilisateur

Starcom Systems

Starcom Systems Kylos Compact Manuel utilisateur

Garmin

Garmin 15 H Series Manuel utilisateur

Cobra

Cobra Marine MC 600Ci Manuel utilisateur

Cellocator

Cellocator CelloTrack T Manuel utilisateur

Enfora

Enfora Mini-MT GSM2228UG001 Manuel utilisateur

Magellan

Magellan eXplorist 100 Manuel utilisateur

LTE

LTE G50B Manuel utilisateur

Garmin

Garmin DEZL OTR500 Manuel utilisateur

SkyGolf

SkyGolf SkyCaddie SG1 Manuel utilisateur