The StreamStick will
remember up to 8 devices.
After 8 devices have been
stored, the rst (original)
device paired will be
forgotten.
Once a device is stored,
the StreamStick will
auto-pair with most
devices. This process may
take up to 1 minute.
Try to avoid placing the
StreamStick behind dense
objects, if possible – while
line-of-sight isn’t necessary
for Bluetooth applications,
you will get best results if
the StreamStick is not
blocked.
Connect the StreamStick to practically any USB port you
can nd (vehicle dashboard, back of TV, receiver or
stand-alone USB charger). A blue LED will blink slowly
when properly powered.
Choose one of the provided cables that works best with your
application and connect it to the 3.5mm port on the side.
Connect the other end to the AUX-Input on your stereo. Make
sure ‘AUX’ is selected as the source on the stereo.
The ‘PAIR’ button is only used if the user wants to disconnect
the currently connected device and pair a dierent one. Press
the button once, return to the next source device and make
sure it is searching via Bluetooth – if the device is stored in the
StreamStick it will connect and pair automatically.
