NAUSICAA Weighing System Manuel utilisateur
NAUSICAA WEIGHING
SYSTEM
ACCURACY : 100 g
WEIGHT CAPACITY : 300 kg
v03.04/17
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
www.nausicaa-medical.eu
User Manual - NAUSICAA Weighing System
Contents
• Assembling Instructions
• Instructions for Use
• General Safety Guidelines
• Cleaning & Maintenance
• Troubleshooting Guide
• Battery Change
• Warranty
1-3
4-7
8
9
10
11
12-13
Manufacturer :
EXPONDO GmbH
An den Treptowers 1
D-12435 BERLIN - ALLEMAGNE
Distributed by NAUSICAA Médical S.A.S.
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Assembling Instructions
PUT THE 3 BATTERIES (INCLUDED) IN PLACE BEFORE ASSEMBLING :
Step 1 :
- Disassemble the spreader bar and its
vertical axis
1
1
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Step 2B : With simple hook
- Insert the weighing system at the center
of the fixation.
2
Assembling Instructions
Step 3 :
- Mount the spreader bar on the lower part
of the weighing system with the vertical
axis and its fixation.
3
Step 4 :
- Close the spreader bar protection.
4
2
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Assembling Instructions
DIRECTIONS FOR USE :
• Your weighing system is designed to weight people, do not use it for
other purposes.
• Check that the patient’s weight does not exceed the maximum weight
that can be raised by the weighing system.
• Do not force the controls and features of the weighing system, they are
all easy to use and do not require strength.
• The weighing system must be handled with care when a patient is trans-
ferred and at a speed appropriate to the situation.
3
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Step 1 : POWER ON
- Press _ for 1 second to boot up, battery
tests and initializes.
- Screen shows detection message while
scale detects its load and auto-zero itself
(up to a load of 30 kg).
Step 2 : POWER OFF
- Press _ for 1 second to power off scale.
- Display shows power-off message.
1
2
8.8.8.8.8
0.0
- - - - -
oFF
STB ZERO TARE HOLD
STB ZERO STB
4
Instructions for Use
The weighing system must be used with a well-balanced and stable load.
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
18.2 18.2
STB HOLD STB
Step 3 : TARE
- Press _ to store weight as tare.
-“TARE” shows and weight turns zero.
- If weight is over 100% of the measuring
range, or less than 0, tare is not allowed.
If weight is not stable or held, tare is not
allowed.
- Press _ to restore tare
“TARE” hides, and weight resumes in gross
mode.
3
100.6 100.60.0
STB STBSTB TARE
Step 4 : HOLD
- Press _ to lock the display.
“HOLD” shows and display is frozen.
Press _ again to resume display.
- “HOLD” hides and display resume
refreshing.
4
TARE
ZERO
TARE
ZERO
HOLD
UNIT
HOLD
UNIT
5
Instructions for Use
The weighing system must be used with a well-balanced and stable load.
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Step 5 : UNIT SWITCH
- Press _ for 1 second to switch measuring
unit between kg, lb and N.
- If scale is tared, or held, unit switching is
not allowed.
Step 6 : ZERO
- Press _ for 1 second to zero scale.
“ZERO” shows and weight turns zero.
If weight is tared, or not stable, or held, zero
is not allowed.
This operation is available for a load inferior
to 6 kg.
5
6
10.0 22.0 98.0
STB STB STB
100.6 0.0
STB STB
TARE
ZERO
HOLD
UNIT
6
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Instructions for Use
The weighing system must be used with a well-balanced and stable load.
Step 8 : SETTING 2 / BACKLIGHT (BL)
- Press _ and _ simultaneously and hold two buttons
for 1 second, to enter Setting Mode.
- Press 4 times _ to enter Backlight option; and press _ to
change Backlight option.
Backlight can be set to off (disabled), 5 (5 sec), 15 (15 sec),
30 (30 sec), 60 (60 sec), on (never).
When Backlight is set to 5, 15, 30, or 60, scale turns off
backlight in corresponding seconds after it is stable.
When Backlight is set to off, backlight is disabled, and
never turns on.
When Backlight is set to on, scale never turns off backlight,
no matter it is stable or not.
- Push to exit the setting mode.
Step 7 : SETTING 1 / AUTO OFF (oFF)
- Press _ and _ simultaneously and hold
two buttons for 1 second, to enter Setting
Mode.
- Press _ to enter Auto-Off option; and
press _ to change Auto-Off option.
Auto-Off can be set to 0 (disabled), 5 (5
min), 15 (15 min), 30 (30 min), 60 (60 min).
-
Push 4 times to exit the setting mode.
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
TARE
ZERO
HOLD
UNIT
HOLD
UNIT
HOLD
UNIT
HOLD
UNIT
7
8
SETUP
SETUP bLoFF
oFF 0
End
End
STB ZERO
STB ZERO STB ZERO
STB ZERO
STB ZERO
STB ZERO
7
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Instructions for Use
The weighing system must be used with a well-balanced and stable load.
1. Use the Weighing System Lift only for its intended purpose, in accordance with the legislation, the
regulations for labor protection and accident prevention, as well as the generally recognized rules
of technology.
2. Use the Weighing System only after being trained for its handling.
3. Before using the device, please read the complete User Manual in order to avoid damage due
to improper handling or exposure to risks. The User Manual contains important information and notes
required for the Weighing System use.
4. Before using the Weighing System with other medical and non-medical devices, check that the
combination of these products is allowed and can be used together safely.
5. Assembly, commissioning, maintenance and repair of the Weighing System should be entrusted
only to specialists.
6. Do not expose the Weighing System to direct sunlight or heat.
7. Ensure that no moisture enters the electrical system.
8. The Weighing System should not be used as soon as abnormal noises, damages or any other mal-
functions occur. In this case, inform us.
9. If damaged or defective, the Weighing System should not be used. Inform the dealer to remedy
the default or failure.
General Safety Guidelines
8
User Manual : NAUSICAA WEIGHING SYSTEM
Distributed by NAUSICAA Médical S.A.S. / Approved by Ghizlane Labrosse (Biomedical Engineer)
Table des matières
Autres manuels NAUSICAA Système de levage
Manuels Système de levage populaires d'autres marques
morse
morse 82H-124 Manuel utilisateur
Braun
Braun NL955 Series Manuel utilisateur
haacon
haacon 1889.10 Manuel utilisateur
Protekt
Protekt AT 252 Manuel utilisateur
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manuel utilisateur
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manuel utilisateur
Genie
Genie Z-60/34 Manuel utilisateur
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuel utilisateur
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuel de programmation
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuel de programmation
