National Instruments Cabled PCI Express Manuel utilisateur

Overview

Cabled PCI Express is a cabled serial bus used for high-performance interconnect of system components. It is based on

PCI Express and so provides a scalable, high-bandwidth, low-latency bus. In measurement and automation, cabled PCI

Express is very appealing to high-performance applications using a host PC for measurement processing and analysis.

For example, cabled PCI Express is currently used to connect a host PC to a PXI (PCI eXtensions for Instrumentation)

chassis with sustained transfer rates of nearly 800 Mbytes/s. The high performance, low cost, and easy connectivity of

cabled PCI Express makes it ideal for a number of measurement applications, and therefore, its applications is expected

to expand to serve more applications in the future. This paper examines cabled PCI express technology and both its

current and future application in measurement and automation systems.

What Is Cabled PCI Express?

Cabled PCI Express is the next generation peripheral bus for servers, desktops, and laptops. Cabled PCI Express will

have the following advantages:

• Wide use in standard PCs means low implementation costs

• High bandwidth – 4 Gigabytes / second

• Low latency – 300-700 nanoseconds

• Application software and operating systems run without changes due to no software changes from PCI model

• At least 15 standardized form factors including cabled PCI Express

• Only standard that is designed for chip-to-chip, board-to-board, and box-to-box applications

Cabled PCI Express is being defined by the PCI-SIG standards body as an extension of the PCI Express Base

specification.Extending PCI Express from box-to-box and over longer distances is the goal of cabled PCI Express.

Cabled PCI Express provides a simple yet high-performance bus for expanding PC and measurement I/O. Some

commercial applications of cabled PCI Express include interfaces on laptop or small form factor PC to connect

peripherals to laptops and split-system desktop PCs that can move the CPU box under the desk while keeping user I/O

easily accessible on top of it. The cabled PCI Express specification anticipates cables up to 7 meters long and still meet

the PCI Express timing requirements. It is nearing completion with the final release expected in the fall of 2006.

Products Available

National Instruments, as a leading innovator in applying commercial technology to test and measurement applications,

provides a line of remote controllers to connect VXI and PXI chassis to PCs, called MXI (Multiplatform eXtensions for

Instrumentation). The first MXI product, MXI-1, was used to connect VXI mainframes to PCs in 1991. The latest

products, MXI Express, use cabled PCI Express to connect a PXI chassis to a host PC. MXI Express remote controllers

are available now in x1 to connect to a PXI chassis and x4 configurations provide up to nearly 800 MB/s of sustained

throughput to PXI Express chassis. There is both a PCIe (see Figure 1) and ExpressCard (see Figure 2) host interface

for use with desktops and laptops, respectively. The primary purpose of using cabled PCI Express in MXI Express was

to take advantage of the higher performance, form factor options and lower costs of PCI Express.

Cabled PCI Express as a Standard

Interface for Virtual and Synthetic

Instruments

Document Version 1

Figure 1. NI MXI Express uses cabled PCI Express to connect a PC to PXI

The x1 MXI Express form factor shown above uses a PCI Express slot in a desktop PC to connect to a PXI chassis. The

ExpressCard form factor shown below supports a x1 cabled PCI Express link to a PXI chassis using the same cables.

Thus the PXI module and cables are common to both laptops and desktops allowing for higher reuse.

Document Version 1

Figure 2. NI MXI Express uses cabled PCI Express to connect a Laptop with ExpressCard to PXI

When MXI-1 first launched in 1991 it provided 10MB/s bandwidth. This was state-of-the-art and used commercial

technologies available at that time (see Figure 3). By incorporating cabled PCI Express into the MXI product line can

now sustain nearly 800 MB/s.

Cabled PCI Express as a Standard

Interface for Virtual and Synthetic

Instruments

Document Version 1

Figure 3. Cabled PCI Express makes MXI Express 80X higher bandwidth than MXI-1

While bandwidth has dramatically increased, the costs of these links have decreased. Figure 4 shows how the price per

bandwidth has dropped significantly over the last 15 years.

Figure 4: From $450/MB/s to $2.25/MB/s – Cabled PCI Express Helps Decrease Price per Bandwidth

MXI Express x1 for PXI chassis cut the cost per MB/s in half from $19/MB/s to $9/MB/s. MXI Express x4 for PXI

Express chassis cut that further to $2.25/MB/s. The cost reductions show the power of adopting commercial

technologies and ensure that PXI-based virtual instrumentation will continue to grow into more price sensitive

applications.

Software-centric Synthetic and Virtual Instrumentation

Because cabled PCI Express was designed for box-to-box applications it can connect a PC to traditional instruments. As

the trend for more software-centric instrumentation increases, the need for a high-speed connection to a host processor

is even more important. The US Department of Defense, for example, has coined a term called synthetic

instrumentation, to describe these software-centric systems. The DoD has created a forum called the Synthetic

Instrument Working Group (SIWG) who’s role is to define standards for interoperability of synthetic instrument

systems. The SIWG defines synthetic instruments (SI) as:

A reconfigurable system that links a series of elemental hardware and software components with standardized

interfaces to generate signals or make measurements using numeric processing techniques.

Document Version 1

The focus of the SIWG has been primarily on the SI concepts as applied to RF stimulus and measurement systems. Data

intensive applications, like RF testing, require a high-bandwidth, low-latency bus to connect the IF digitizers to the

processor (see Figure 5).

Figure 5. Synthetic Instrument RF Block Diagram

For example, to digitize a 50 MHz wide RF signal requires 100 Mbytes/s of bandwidth (at 2 bytes of resolution per

sample). For an input and output channel, this grows to 200 MB/s. And for increasingly common multi-channel, or

MIMO (Multi Input, Multi Output) applications, the bandwidth required can quickly scale to multiply gigabytes per

second. PCI Express, and cabled PCI Express in particular, is a leading contender for this high speed link because of its

excellent technical capabilities, wide commercial adoption, and low-cost infrastructure.

Cabled PCI Express is based on PCI Express and so provides a scalable, high-bandwidth, low-latency bus for

chip-to-chip, board-to-board, and box-to-box applications. In the past some data intensive applications couldn’t transfer

the data fast enough to the host PC and so the data was processed in the box instrument using vendor-defined software

and hardware. Cabled PCI Express opens up a new larger and faster pipe to the host PC so more applications can take

advantage of user-defined software and hardware for measurement processing and analysis. Today NI uses cabled PCI

Express to connect host PCs to PXI chassis with MXI Express. It currently sustains transfer rates of 110 MB/s for a x1

link and 798 MB/s for a x4 link. In the future, cabled PCI Express may offer a compelling bus solution for synthetic

instrumentation.

Relevant NI Products and Whitepapers

National Instruments, a leader in automated test, is committed to providing the hardware and software products

engineers need to create these next generation test systems.

Software:

•NI TestStand Test Management Framework

•LabVIEW Graphical Programming Environment

•Signal Express Interactive Measurement Software

Hardware:

•Modular Instruments (Oscilloscopes, Multimeters, RF, Switching, and more)

•Multi-function Data Acquisition

•PXI System Components (Chassis and Controllers)

•Instrument Control (GPIB, USB, and LAN)

Cabled PCI Express as a Standard

Interface for Virtual and Synthetic

Instruments

Document Version 1

Whitepapers

NI offers a Designing Next Generation Test Systems Developers Guide. This guide is collection of whitepapers

designed to help you develop test systems that lower your cost, increase your test throughput, and can scale with future

requirements. To read the entire developers guide, you can: Download the PDF (90+ page) version or view the

web-version of the Designing Next Generation Test Systems Developers Guide.

Document Version 1

Table des matières

Autres manuels National Instruments Équipement d'enregistrement

National Instruments

National Instruments NI-9862 Manuel utilisateur

National Instruments

National Instruments NI PCIe-8233 Manuel utilisateur

National Instruments

National Instruments FieldPoint FP-1000 Guide de démarrage rapide

National Instruments

National Instruments PXI-8461/2 Manuel utilisateur

National Instruments

National Instruments NI VISION PCI-8254R Manuel utilisateur

National Instruments

National Instruments sbRIO-9601 Manuel utilisateur

National Instruments

National Instruments BNC-2140 Manuel utilisateur

National Instruments

National Instruments NI 951x Manuel utilisateur

National Instruments

National Instruments NI-845 Series Manuel utilisateur

National Instruments

National Instruments GPIB-PCII Manuel utilisateur

National Instruments

National Instruments GPIB-MAC Manuel utilisateur

National Instruments

National Instruments AT-GPIB Manuel utilisateur

National Instruments

National Instruments USB-8506 Manuel utilisateur

National Instruments

National Instruments UMI-7664 Manuel utilisateur

National Instruments

National Instruments MXI PCIe-8371 Manuel utilisateur

National Instruments

National Instruments PXIe-8370 Manuel utilisateur

National Instruments

National Instruments 8234 Manuel utilisateur

National Instruments

National Instruments VME-SB2020 Manuel utilisateur

National Instruments

National Instruments PCI-8331 Manuel utilisateur

National Instruments

National Instruments UMI-7774 Manuel utilisateur

National Instruments

National Instruments GPIB-232CT-A IBCL EPROM Manuel utilisateur

National Instruments

National Instruments NI 9403 Manuel utilisateur

National Instruments

National Instruments NI 9467 Manuel utilisateur

National Instruments

National Instruments PXI-PCI 8330 Series Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien