National Instruments FD-11601 Manuel utilisateur

FD-11601

Feature Usage

2022-07-11

Contents

FD-11601 User Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

ni.com

FD-11601 Feature Usage

FD-11601 User Guide

The FieldDAQ FD-11601 is an IP65/IP67-rated eight-channel simultaneous voltage

input device that can be connected to external powered and TEDS sensors. It can be

networked and synchronized with IEEE 802.1AS devices.

Figure 1. FD-11601 Front Panel

FD-11601

±10V Powered Sensor Input

STATUS

10 A TOTAL

9-30 V

FieldDAQ

OUT

10/100/1000

LINK/ACT

SYNC

0 1

2 3

0 1

2 3

BANK 1

BANK 2

AI+

AI–

GND/T–

T+

1. Power IN Connector

2. Power LED

3. Ethernet Port 0 and LED

4. Bank 1 Voltage Input Connectors 0 through 3 and LEDs

5. Bank 2 Voltage Input Connectors 0 through 3 and LEDs

6. Mounting Holes

7. Power OUT Connector

8. STATUS LED

9. Ethernet Port 1 and LED

10. SYNC Logo

FD-11601 Feature Usage

FD-11601 Basic Information

Kit Contents

Items in your FieldDAQ kit:

■ FD-11601

■ FD-11601 Quick Start

■ FD-11601 Safety, Environmental, and Regulatory Information

■ 1 M12 female cap for power IN connector (connected to device)

■ 11 M12 male caps for power OUT, Ethernet, and input connectors

(connected to device)

Pinouts

Refer to the following topics for the connector pinouts on your FieldDAQ device:

■Voltage input connector pinout: Refer to Voltage Input Connectors.

■ Ethernet connector pinout: Refer to Ethernet Ports.

■ Power connector pinout: Refer to Power Connectors.

Driver Support

Earliest driver support version for your FieldDAQ device:

Driver Earliest Version Support

NI-DAQmx 18.5

Table 13. FD-11601 Driver Support

ni.com

FD-11601 Feature Usage

Cables and Accessories

The following table lists some cables and accessories available for your FieldDAQ

device. For a complete list of FieldDAQ accessories and ordering information, refer

to the pricing section of the FD-11601 product page at ni.com.

Cable/Accessory Part Number

IP67 Power Supply 147464-01

PS-16 Power Supply 781094-01

M125F-Pigtail Power Cable (1 m, 2 m, 3 m lengths) 786172-01/02/03

M125F-M125M Power Cable (0.3 m, 1 m, 3 m lengths) 786173-0R3/01/03

SHM128M-RJ45 Ethernet Cable (1 m, 2 m, 3 m, 10 m lengths) 785944-01/02/03/10

SHM128M-SH128M Ethernet Cable (0.3 m, 1 m, 3 m lengths) 785946-0R3/01/03

SHM125M-Pigtail I/O Cable (0.3 m, 1 m, 3 m lengths) 785950-0R3/01/03

SHM125M-Pigtail-RA I/O Cable (1 m, 3 m lengths) 785949-01/03

FD-11950, M125F Field-serviceable I/O Connector 785941-01

FD-11951, M125F-RA Field-serviceable I/O Connector 785942-01

M12 Torque Wrench, Ethernet and I/O 786181-01

M12 Torque Wrench, Power 786182-01

Universal M12 Male Cap, Plastic 786177-01

Universal M12 Male Cap, Metal 786178-01

Universal M12 Female Cap, Plastic 786180-01

Universal M12 Female Cap, Metal 786179-01

FD-11960, DIN Rail Mounting Kit 786443-01

Table 2. FD-11601 Cables and Accessories

Documentation

Documents that contain information about your FieldDAQ device:

■ FD-11601 Specifications

■ FD-11601 Quick Start

FD-11601 Feature Usage

■ FD-11601 Safety, Environmental, and Regulatory Information

■ FD-11601 Calibration Procedure

Safety Guidelines

Caution Do not operate the FD-11601 in a manner not specified in this

user guide. Product misuse can result in a hazard. You can compromise the

safety protection built into the product if the product is damaged in any

way. If the product is damaged, return it to NI for repair.

The FD-11601 is rated for use in DRY or WET LOCATIONS. Hazardous voltages may

not be connected to the device. A hazardous voltage is a voltage greater than

42.4 V peak voltage or 60 V DC in DRY LOCATIONS, and 22.6 V peak or 35 V DC in WET

LOCATIONS.

Caution All wiring must be insulated for the highest voltage used.

EMC Guidelines

This product was tested and complies with the regulatory requirements and limits

for electromagnetic compatibility (EMC) stated in the product specifications. These

requirements and limits provide reasonable protection against harmful interference

when the product is operated in the intended operational electromagnetic

environment.

This product is intended for use in industrial locations. However, harmful

interference may occur in some installations, when the product is connected to

a peripheral device or test object, or if the product is used in residential areas. To

minimize interference with radio and television reception and prevent unacceptable

performance degradation, install and use this product in strict accordance with the

instructions in the product documentation.

Furthermore, any changes or modifications to the product not expressly approved

by NI could void your authority to operate it under your local regulatory rules.

ni.com

FD-11601 Feature Usage

Electromagnetic Compatibility Notices

Refer to the following notices for cables, accessories, and prevention measures

necessary to ensure the specified EMC performance.

Notice To ensure the specified EMC performance, operate this product

only with shielded cables and accessories.

Special Conditions for Marine Applications

Some products are approved for marine (shipboard) applications. To verify marine

approval certification for a product, visit ni.com/product-certifications, search by

model number, and click the appropriate link.

Notice In order to meet the EMC requirements for marine applications,

install the product in a shielded enclosure with shielded and/or filtered

power and input/output ports. In addition, take precautions when

designing, selecting, and installing measurement probes and cables to

ensure that the desired EMC performance is attained.

Unpacking

The FD-11601 ships in an antistatic package to prevent electrostatic discharge (ESD).

ESD can damage several components on the device.

Notice Never touch the exposed pins of connectors.

To avoid ESD damage in handling the device, take the following precautions:

■Ground yourself with a grounding strap or by touching a grounded object.

■Touch the antistatic package to a metal part of your computer chassis

before removing the device from the package.

FD-11601 Feature Usage

Remove the device from the package and inspect it for loose components or any

other signs of damage. Notify NI if the device appears damaged in any way. Do not

install a damaged device.

Store the device in the antistatic package when the device is not in use.

Hardware Symbol Definitions

The following symbols are marked on your FieldDAQ device.

When this symbol is marked on a product, refer to Safety Guidelines for information about

precautions to take.

At the end of the product life cycle, all NI products must be disposed of according to local

laws and regulations. For more information about how to recycle NI products in your region,

visit ni.com/environment/weee.

540

NI 符合中国电子信息产品中限制使用某些有害物质指令(RoHS)。关于 NI 中国 RoHS 合规

性信息，请登录 ni.com/environment/rohs_china。(For information about China RoHS

compliance, go to ni.com/environment/rohs_china.)

What You Need to Get Started

You will need the following items to set up your FieldDAQ device.

ni.com

FD-11601 Feature Usage

Figure 1. FD-11601 Installation Supply List

NI-DAQmx

3 4

1. Host Computer running Windows or NI Linux RT

2. Application Soware

3. NI-DAQmx Driver

4. FD-11601

5. 5-pin L-coded M12 Power Input Cable

6. 8-pin X-coded M12 Ethernet Cable

7. External Power Supply

8. 5-pin A-coded M12 I/O Cables and Accessories

Note You can either use a shielded straight-through Ethernet cable or an

Ethernet crossover cable to connect the FieldDAQ device directly to your

computer.

Setting up the FieldDAQ Device

Complete the following steps.

1. Install the application soware (if applicable), as described in the

installation instructions that accompany your soware. Check your driver and

application development environment (ADE) readme files for specific version

compatibility.

2. Install NI-DAQmx from ni.com/downloads/drivers. Complete the instructions.

FD-11601 Feature Usage

3. Register your NI hardware online at ni.com/register when prompted. The last

dialog box opens with the following options:

■ Restart Later to install more NI soware or documentation.

■ Shut Down or Restart if you are ready to install your device.

If you have problems installing your soware, go to ni.com/support/daqmx.

4. (Optional) Mount the FieldDAQ device to a panel or DIN rail, as described in

Mounting.

5. Make voltage input connections. Refer to Voltage Input Connectors and

Measurements for information about signal connections and guidelines.

6. Align and connect one end of the Ethernet cable to Ethernet port 0 on

the device, and the other end directly to your computer or any network

connection on the same subnet as your computer.

7. Power the device by aligning and connecting the power IN port on FieldDAQ

to an external 9 V DC to 30 V DC power source with the 5-pinL-coded M12

power cable. For information about wiring your external power source to

the power connector, refer to Wiring External Power to the FieldDAQ Device.

The FieldDAQ device requires an external power supply that meets the

specifications listed in the FD-11601 Specifications .

The Power LED turns on. Refer to Power LED for information about Power LED

status.

8. To add the FieldDAQ to your soware configuration, open NI MAX on your8.

Windows host computer. Expand Devices and Interfaces » Network Devices.

■If the device is on your local subnet, the device automatically appears in

the list of available devices. Right-click the FieldDAQ device and select Add

Device.

■If the device is not on your local subnet, right-click Network Devices and

select Find Network NI-DAQmx Devices.

1. In the Find Network NI-DAQmx Devices dialog box that opens, do one

of the following:

ni.com

FD-11601 Feature Usage

Autres manuels pour FD-11601

Autres manuels National Instruments Générateur portable

National Instruments

National Instruments NI PCI-6542 Manuel utilisateur

National Instruments

National Instruments NI PXIe-5673E Manuel

National Instruments

National Instruments PXIe-5745 Manuel utilisateur

National Instruments

National Instruments PXIe-5655 Manuel du propriétaire

National Instruments

National Instruments PXIe-5413 Manuel utilisateur

National Instruments

National Instruments PXI-5421 Manuel utilisateur

National Instruments

National Instruments NI PXIe-5450 Manuel du propriétaire

National Instruments

National Instruments NI 6.6 GHz MIMO Manuel utilisateur

National Instruments

National Instruments NI 5422 Manuel utilisateur

National Instruments

National Instruments DAQArb 5411 Manuel utilisateur

National Instruments

National Instruments NI 5401 Manuel utilisateur

National Instruments

National Instruments NI 5402 Manuel utilisateur

National Instruments

National Instruments NI 5412 Manuel utilisateur

National Instruments

National Instruments PXIe-5654 Manuel

National Instruments

National Instruments PXIe-5650 Manuel utilisateur

National Instruments

National Instruments PXIe-5654 Manuel

National Instruments

National Instruments PXIe-5654 Manuel utilisateur

National Instruments

National Instruments PXIe-5423 Manuel

National Instruments

National Instruments 5412 Manuel

National Instruments

National Instruments NI 5401 Manuel utilisateur

National Instruments

National Instruments NI 5421 Manuel

National Instruments

National Instruments NI 5741 Manuel utilisateur

National Instruments

National Instruments NI-5742 Manuel utilisateur

National Instruments

National Instruments PXIe-5673 Manuel

Manuels Générateur portable populaires d'autres marques

Kohler

Kohler 20EORZ Mode d’emploi

Powerhorse

Powerhorse 83171 Manuel utilisateur

HURST

HURST ML-630-SI Manuel utilisateur

ETQ

ETQ TG4000 Manuel utilisateur

Briggs & Stratton

Briggs & Stratton 40265 Guide de configuration

ConMed

ConMed 7550 Manuel utilisateur

Owon

Owon Waveform Generator Manuel utilisateur

evertz

evertz 7700 Series Manuel utilisateur

Power Stroke

Power Stroke PS906025 Manuel utilisateur

Firefly

Firefly Cygnus CYG2400/460/24 Manuel utilisateur

Draper

Draper PG950S Mise à jour du firmware

PowerBoss

PowerBoss PowerBoss Manuel utilisateur

SDMO

SDMO SH 4000 Manuel utilisateur

EINHELL

EINHELL STE 5500 Manuel utilisateur

Wanco

Wanco WI3000P Manuel utilisateur

Full Boar

Full Boar FBT-3300 Manuel utilisateur

Dwyer Instruments

Dwyer Instruments ASG Manuel utilisateur

Westinghouse

Westinghouse WH1000i Series Manuel utilisateur